| Machine ID: |
2253
Click here to see machine details |
| Category: |
EDM |
| Machine Type: |
Conventional, Ram Type, Sinker |
| Brand Name: |
Charmilles |
| Short Description: |
Charmilles Roboform 20, sinker type EDM. |
| Asset Description Notes: |
Charmilles Roboform 20 CNC sinker type EDM. Table Travels: X 11.8", Y 9.8", Z 9.8". Walker LBP magnetic work table size 15.7" x 11.8", Work tank Size 26" x 18" x 9.5". Ram Platen to worktable 4.4” – 14.2". Built in C axis is fully programmable 4 th axis. It can rotate as well as index 360 degrees about the center of the ram. It can also be programmed to burn a pitch.
Power Supply 32 amps. Maximum Electrode Weight 55 lbs. Maximum Workpiece Weight 440 lbs.
Dielectric Capacity 53 gallons. Walker Magnetic Base and 20mm 3R Mecatool Adaptor and a few pieces of tooling. 380 to 220V transformer included. Fire Suppression system can be installed if required for additional $750. |
| Machine ID: |
2239
Click here to see machine details |
| Category: |
EDM |
| Machine Type: |
Conventional, CNC |
| Brand Name: |
Charmilles |
| Short Description: |
2002 Charmilles 35P Roboform EDM |
| Asset Description Notes: |
2002 Charmilles 35P Roboform CNC conventional EDM. Travel: X-axis 14" x Y 10" x Z 12";
C Axis 360°, 100 rpm.
Maximum work piece dimensions:
X 31" x Y 21" x Z 12"; Workpiece weight 1,100 lbs. Electrode weight 220 lbs without C-axis, 55lbs with. Tank 31.5" x 21.6" x 14.6" deep. Machine dimensions 74.8" x 66.2" x 92.5" (LWH). 5,500 lbs. Control dimensions 23.6" x 25" x 74.8" (LWH). 600 lbs.
Full 4 axis erosion, with vector, free and servo planetary.
5 Station Tool Changer.
32 amp Generator.
Hard metaloption, for carbide & PCD cutting.
0.1µRa surface finish.
Handheld control.
Fire prevention system (Not tested).
Supplied with System 3R macro combi chuck.
Machine also supplied with the following:
Chiller.
System disks.
User manuals.
System 3R Combi ATC forks.
(2) System 3R macro combi spigots.
(8) System 3R electrode holders. |
| Machine ID: |
2011
Click here to see machine details |
| Category: |
EDM |
| Machine Type: |
Conventional, Ram Type, Sinker |
| Brand Name: |
Mitsubishi |
| Short Description: |
Mitsubishi M35K, 4 axis Sinker EDM, C7G35 control, 35 AMP. |
| Asset Description Notes: |
Mitsubishi M35K, Sinker EDM, C7G35 CNC control, 35 AMP. Work Tank Dimensions: 31.50"W X 21.65"D X 12.20"H, MAX. Weight of Workpiece: 1,000 LBS, Walker magnetic table dims: 27.56"W X 19.69"D. Travels X 13.78" x Y 9.84" x Z 13.78". 4th Rotating Axis with Orbital Workhead. Distance–Platen to table: 19.69" ~ 5.91", MAX Electrode Weight: 165 LBS, Dielectric Reservoir capacity: 92.4 gal.; 35 AMP generator, 3R 25 ATC, Filtration and Halon system. |
| Machine ID: |
1701
Click here to see machine details |
| Category: |
EDM |
| Machine Type: |
Conventional, Ram Type, Sinker |
| Brand Name: |
Hansvedt |
| Short Description: |
Hansvedt 201, 30-amp Conventional Sinker EDM. |
| Asset Description Notes: |
Hansvedt (Hardinge) model 201 30-amp conventional EDM. $3,000 of 3R tooling. Pulse 210 30-amp power supply. Acu-Rite Master G 3-axis DRO. Travel 11" X; 18" Y; 10" Z. Very little hours used in a small shop, all books available. |
| Machine ID: |
1757 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
EDM |
| Machine Type: |
Conventional, CNC |
| Brand Name: |
LeBlond Makino |
| Short Description: |
LeBlond Makino EDNC-64 MA 8 CNC sinker |
| Asset Description Notes: |
LeBlond Makino EDNC-64 MA-8 CNC sinker EDM. 16- station tool holder. Walker 12 x 24 Ceramax magnetic chuck. 3R tooling. MGC hand-held control.
Machine installation footprint 118" x 126" |
| Machine ID: |
1201 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
EDM |
| Machine Type: |
Conventional, Ram Type, Sinker |
| Brand Name: |
Charmilles |
| Short Description: |
Charmilles D10, Ram type, sinker EDM. |
| Asset Description Notes: |
Internal Tank Dimensions: 21” x 14” x 8”,
Table Dimensions: 13.75” x 8”,
X Axis Travel: 7.87”, Y Axis Travel: 4.75”,
Z Axis Travel: 3.87”. Power Supply Peak Amperes (G35B)25 Amps. Control Model Isopulse 12.
Bench, 3R Magnetic Platten, spare electrodes & holders.
|
| Machine ID: |
552 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
EDM |
| Machine Type: |
Hole-Driller |
| Brand Name: |
Eltee Pulsetron |
| Short Description: |
Eltee Pulsetron manual EDM machine |
| Asset Description Notes: |
Eltee Pulsetron EDM, model # TR20 w/ EP-30 Power Supply & 3R system * 6 x 12" magnetic chuck * manual tables, rotary heads and threads * 30 Amps * 1-10 Leads * 3 KVA Max * 55 gal tank * 35psi flushing pressure * TRM-20 = 5" quill travel, 8" column adjustment, 10.5" throat distance, 17" quill clearance, tank size: 12 x 20", tank height: 9", table positioning - .0001"
Brand new Analam 3 axis Digital Read out. Paid over $3k for unit and instalation. Includes 20 chucks.
|
|
