| Machine ID: |
2343
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Rectifiers |
| Brand Name: |
Dynapower |
| Short Description: |
Dynapower 13,000-amp, 15/12 volt DC rectifier |
| Asset Description Notes: |
Dynapower SCR rectifier. 13,000 amps, 15/12 volts out. 460/3/60 volts 311 amps input. Water cooled with remote. |
| Machine ID: |
2341
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Rectifiers |
| Brand Name: |
Rapid Power |
| Short Description: |
6000 amp Rapid Power rectifier |
| Asset Description Notes: |
Rapid Power Technologies rectifier. Continuous duty 6,000-amp, 15 VDC output, 480/3/60 VAC input. Water cooled. Panel control. |
| Machine ID: |
2296
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Motors AC/DC |
| Brand Name: |
Baldor |
| Short Description: |
Baldor Super E, 5HP motor, 230/460V, barely used, like new. |
| Asset Description Notes: |
(4) USED Baldor Super E, 5HP motor, 230/460V. (4) units left. Catalog Number: EM3708T. Horsepower: 5, Voltage: 230/460, Hertz: 60, Phase: 3. Full Load Amps: 14.4/7.2, Usable at 208 Volts: 15.6 Amps. RPM: 1160, Frame Size: 215T, Service Factor: 1.15, Rating: 40C AMB-CONT. Locked Rotor Code: K. NEMA Design Code: A. Insulation Class: F. Full Load Efficiency: 90.2, Power Factor: 72, Enclosure: TEFC, Baldor Type: 3750M DE Bearing: 6307. ODE Bearing: 6206. Electrical Specification Number: 37WGT921, Mechanical Specification Number: 37H244, Base: RG, Mounting: F1. Price is each. These cost $890 new, get them half price. Like new condition. |
| Machine ID: |
2195
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Transformers |
| Brand Name: |
Magna Electric |
| Short Description: |
5000 kVA station type 3-phase transformer |
| Asset Description Notes: |
5000 kVA station type 3-phase transformer. Completely refurbished. High side 72000 V delta Low side 4160Y/2400. Priced in $Cdn |
| Machine ID: |
2194
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Transformers |
| Brand Name: |
Magna Electric |
| Short Description: |
Magna Electric 7500 kVA 3-phase station type transformer. |
| Asset Description Notes: |
7500 kVA 3-phase station type transformer. Completely refurbished. High side 24,940 V delta. Low side 13,800 V delta. Ready for immediate delivery. Priced in $Cdn. |
| Machine ID: |
2193
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Transformers |
| Brand Name: |
Magna Electric |
| Short Description: |
1000 kVA dry type 3-phase transformer |
| Asset Description Notes: |
1000 kVA dry type 3-phase transformer Completely refurbished. High side 4160 delta Low side 480Y/277 Priced in $Cdn |
| Machine ID: |
2192
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Transformers |
| Brand Name: |
Magna Electric |
| Short Description: |
1500 kVA 3-phase station type transformer |
| Asset Description Notes: |
1500 kVA 3-phase station type transformer. Completely refurbished. High side 13,800 Kv delta. Low side 600Y/347 Priced in $Cdn |
| Machine ID: |
2181
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Rectifiers |
| Brand Name: |
Rapid |
| Short Description: |
Rapid variable rectifier 75-1500 amp |
| Asset Description Notes: |
Rapid variable rectifier 75-1500 amp; 1-18 vDC output. 27 kW continuous duty. Model S1518 Air-cooled, remote controlled. |
| Machine ID: |
2180
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Rectifiers |
| Brand Name: |
Rapid |
| Short Description: |
Rapid 2000 amp 12 volt rectifier |
| Asset Description Notes: |
Rapid 2000 amp 12 vDC air-cooled remote control rectifier. Input 460v/3 42 amp, 24kW Continuous Duty. |
| Machine ID: |
2007
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Generators |
| Brand Name: |
Enterprise Delaval |
| Short Description: |
Enterprise Delaval, 14 Megawatt Emergency Diesel Generator, standby plant |
| Asset Description Notes: |
Enterprise Delaval, Standby 14 Megawatt power plant. System is comprised of (2) Gen-sets, 7 megawatts each. This system served as a backup for a plant that requires power without interruption. Extremely low hours, most hours have been accumulated from scheduled test runs and maintenance. The system is in perfect operational condition in enclosed environment. Currently operating on #2 Fuel Oil, can run other types of fuels, suchl as Natural Gas. V-16, 4 cycle engines, Displacement 4767 CI, 8338 HP, 450 RPM, air assisted start, water cooled, turbo charged, and mufflers. Engine Bore 17" x Stroke 21". Louis Allis Synchronous generator, Volts 4160, KVA 8750 each, FL amps 1214, RPM 450, KW 7000 each, 60 Hertz, can be modified for 50 Hertz. System is still under power on site. Engineering for installation can be provided for a additional fee. Please call with any questions or for an on site inspection. |
| Machine ID: |
1973
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Breakers |
| Brand Name: |
GE |
| Short Description: |
GE Spectra series switchboard 1200 amp 480/277 |
| Asset Description Notes: |
GE Spectra series switchboard 1200 amp, 480Y/277, 60 Hz, 3 phase, 4-wire type 1. |
| Machine ID: |
1971
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Control Equipment |
| Brand Name: |
ASCO |
| Short Description: |
ASCO 7000 automatic transfer switch |
| Asset Description Notes: |
NEW 1600 AMP ASCO SERIES 7000 AUTOMATIC TRANSFER SWITCH: Brand New. Year of Manufacture: 2000. ASCO 7000 Series. Rated 1600 Amps, 208Y/120 Volts, 60 Hertz, 3 Phase, Solid Neutral. Cat. Number: G7ATBA31600C5C. S/N: 145856. S/O. Number: 52641. BOM Number: 702172. Automatic Transfer with Bypass-Isolation (Open Transition). NEMA Type 1 (Indoor) Enclosure. Keys & Manuals Included. Overall Dimensions: 91"H x 38"W x 60"Deep. Shipping Weight: 2600 lbs. UL Listed & CSA Certified. $12,500 ea.
|
| Machine ID: |
1970
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
UPS |
| Brand Name: |
MGE/Schneider |
| Short Description: |
MGE UPS, 15 kVA 208/3 in & out |
| Asset Description Notes: |
MGE Galaxy 3000 uninterruptible power supply 12kW/15kVA. 208v 3-phase input and output (no transformer). 60 Hz. 5-wire. VRLA batteries. Multi-function LCD status and control console. UL/CSA. Est runtime 8-12 mins at full load with fresh batteries. |
| Machine ID: |
1905
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Phase Converters |
| Brand Name: |
Roto-Master |
| Short Description: |
Roto-Master 15HP phase converter |
| Asset Description Notes: |
Roto-Master single to 3-phase converter with Leeson model 8F286 TEFC motor. 2 part configuration - motor and control panel.
200-amp service recommended. Check your load to see if isolation transformer is needed. |
| Machine ID: |
1890
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Transformers |
| Brand Name: |
GE |
| Short Description: |
GE Type QL 500 kVA Mod. 9T23B3889; 3 ph |
| Asset Description Notes: |
GE general purpose indoor dry type QL; Mod. No. 9T23B3889; 500kVA; 3-phase; primary 500/490/480/470/460/440/430; secondary 240; 40°C ambient; 150°C rise; NEMA type 2; CLASS AA, 220C SYSTEM; IS-19D, drip-proof enclosure; natural draft ventilation. Purchased new by seller 1995. Used for 11 years. Always been indoors. CSA LR3272 UL 769G. |
| Machine ID: |
1784
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Phase Converters |
| Brand Name: |
Arco |
| Short Description: |
ARCO 15HP single to 3-phase converter |
| Asset Description Notes: |
Arco Roto-Phase I model C (standard duty) single to 3-phase converter. Largest single three-phase motor operated equals 15HP rating of the Roto-Phase, all additional three-phase motors operated should be at a lesser horsepower up to 45 amps full load. 230-volt input/output. 15 no load amps. 12.58" x 12.94" base mount. |
| Machine ID: |
1779
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Generators |
| Brand Name: |
Caterpillar |
| Short Description: |
Caterpillar XQ 1750 1750KW diesel towable generator |
| Asset Description Notes: |
Caterpillar XQ 1750 diesel tractor towable 50/60Hz generator rated 1750KW (1400KW at 50Hz). Output 277/480 3-phase (380 volt 3-phase 50Hz). 1,250 gallon (4,730 liters) fuel tank (approx12 hours run time at full load). |
| Machine ID: |
1778
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Generators |
| Brand Name: |
Caterpillar |
| Short Description: |
Caterpillar XQ 750 750KW diesel towable generator |
| Asset Description Notes: |
Caterpillar XQ 750 diesel tractor towable 50/60Hz generator rated 750KW (600KW at 50Hz). Output 277/480 3-phase (380 volt 3-phase 50Hz). 660 gallon (2,500 liters) fuel tank (approx12 hours run time at full load). |
| Machine ID: |
1776
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Generators |
| Brand Name: |
Caterpillar |
| Short Description: |
Caterpillar XQ 200 180KW diesel tow-behind generator |
| Asset Description Notes: |
Caterpillar XQ 200 diesel tow-behind 50/60Hz generator rated 180KW (160KW at 50Hz). Output 120/240 volt single phase; 120/208 volt 3-phase, 277/480 3-phase (380 volt 3-phase 50Hz). 306 gallon (1,160 liters) fuel tank (approx 24 hours run time at full load). |
| Machine ID: |
1775
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Generators |
| Brand Name: |
Caterpillar |
| Short Description: |
Caterpillar XQ 60 60KW diesel tow-behind generator |
| Asset Description Notes: |
Caterpillar XQ 60 diesel tow-behind 50/60Hz generator rated 60KW (48KW at 50Hz). Output 120/240 volt single phase; 120/208 volt 3-phase, 277/480 3-phase (380 volt 3-phase 50Hz). 147 gallon (560 liters) fuel tank (approx 24 hours run time at full load). |
| Machine ID: |
1761
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Generators |
| Brand Name: |
Horlick |
| Short Description: |
Horlick model 60SC-1003 50/60Hz converter |
| Asset Description Notes: |
Horlick model 60SC-1003 belt-driven motor-generator set with 380v 3-phase 50Hz input producing 277/480 YV 3-phase 125kVA 60Hz (±1.5%) output. Unit-mounted in a NEMA 3R weather resistant enclosure. Controls include motor starter, 110v transformer for control circuit, voltmeter, ammeter and frequency meters by phase for output, voltage regulator (±1.0% accuracy), output circuit breaker, pilot lights. 6-8 week leadtime, built to order. Can be made with out enclosure for $26,550. File photos shown. |
| Machine ID: |
1714
Click here to see machine details |
| Category: |
Electrical |
| Machine Type: |
Coil winders |
| Brand Name: |
Exatron |
| Short Description: |
Exatron 1050 Tape and Reel machine with model 5000 Gravity Feed Handler. |
| Asset Description Notes: |
Exatron 1050 Tape and Reel machine with model 5000 Gravity Feed Handler. With custom test site. Pressure sensitive and thermal seal tapes 8mm-72mm. Independent seal head and temperature control with over temp protection. Micro terminal shows current status, set up and diagnostics. Clean shop air required - 1 cfm @ 80 psi |
| Machine ID: |
1842 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Electrical |
| Machine Type: |
Coil winders |
| Brand Name: |
Tanac |
| Short Description: |
Tanac AW8812, 12 spindle coil winders. |
| Asset Description Notes: |
Tanac AW8812, 12-spindle coil winders. Spindle speed 10,000 rpm max. Spindle pitch 2 in.(51 mm). Wire size 0.6 max. Bobbin O.D. 45.0mm max. Wrapping speed 0.24 sec./t. Movement of wrapping device: X (right/left)100mm max. Y (front/back)150mm max. Z (up/down)110mm max. Many accessories included like wire spool dereeler stands, MT-100L, 300L and 800L tensioners, tooling, and spare parts. 4 machines available. S/N 0400407, 0400523, 0400549, 89006209. Price is each. ALL (4) MACHINES WILL BE INCLUDED AT NO EXTRA COST WITH EP-5 LINE (see item 1710)
|
| Machine ID: |
1815 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Electrical |
| Machine Type: |
Coil winders |
| Brand Name: |
Tanac |
| Short Description: |
Tanac AW8812, 12 spindle coil winder. |
| Asset Description Notes: |
Tanac AW8812, 12 Spindle coil winder. Spindle speed 10,000 rpm max. Spindle pitch 2 in.(51 mm). Wire size 0.6 max. Bobbin O.D. 45.0mm max. Wrapping speed 0.24 sec./t. Movement of wrapping device: X (right/left)100mm max. Y (front/back)150mm max. Z (up/down)110mm max. Many accessories included like wire spool dereeler stands, MT-800L tensioners, tooling, and spare parts. 5 machines available. Price is each.
|
| Machine ID: |
1713 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Electrical |
| Machine Type: |
Coil winders |
| Brand Name: |
Tanac |
| Short Description: |
Tanac AW8812, 12 Spindle coil winder. |
| Asset Description Notes: |
Tanac AW8812, 12 Spindle coil winder. Spindle speed 10,000 rpm. Max. No. of spindles 12 spindles X 2. Spindle pitch 2 in.(50.8mm). Wire size 0.6 max. Bobbin O.D. 45.0mm max. Wrapping speed 0.24 sec./t. Movement of Wrapping device: X (right/left)100mm max. Y (front/back)150mm max. Z (up/down)110mm max. Many accessories included like Dereeler/Wire Spool Stands, MT-800L tensioners, tooling, and spare parts. 6 machines available. Price is each, will take offers. |
| Machine ID: |
1710 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Electrical |
| Machine Type: |
Coil winders |
| Brand Name: |
Tanac |
| Short Description: |
Tanac AW8812, 12 Spindle coil winder. EP-5 Bobbin winding system. |
| Asset Description Notes: |
Tanac AW8812, 12-spindle coil winder. Tooled for EP-5 bobbin winding system, including S10 bowl feeder, RTWP8812R taping device, TFF02 parts feeder, TFL01 solder pot system, bobbin loader and wire spool/dereeler carts(4). Spindle speed 10,000 rpm. Max. No. of spindles 12 spindles X 2. Spindle pitch 2 in.(50.8mm). Wire size 0.6 max. Bobbin O.D. 45.0mm max. Wrapping speed 0.24 sec./t. Movement of Wrapping device: X (right/left) 100mm max. Y (front/back) 150mm max. Z (up/down)
110mm max. System new was $750K, never been put into production, buy for fraction of original investment. All documents available. |
| Machine ID: |
1415 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Electrical |
| Machine Type: |
Transformers |
| Brand Name: |
Magna Electric |
| Short Description: |
500kVA Magna Electric arc furnace transformer 480/240 |
| Asset Description Notes: |
500 kVA 1- Phase 60 Hz transformer.
150° C rise; 220° C insulation.
Pri: 277 Bil: 10.
Manual Sec Taps: 192, 197, 202, 207, 212, 217, 222, 227, 232, 237, 242 volts.
Secondary Bil: 10.
Ventilated cabinet NEMA 1. Nema: Floor mount.
Copper wound.
Furnace application.
Dry type - No Oil.
Provision for fan mount.
***NOTE*** 5000 AMPS MAX (SOME TAPS ARE REDUCED CAPACITY).
With lightning arrestor.
With winding hot-spot temperature indicator. |
| Machine ID: |
988 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Electrical |
| Machine Type: |
Lighting |
| Brand Name: |
Lithonia |
| Short Description: |
Lithonia 250W & 400W lights |
| Asset Description Notes: |
Lithonia Lighting 480V or 120V 250W and 400W high bay lighting. Includes Polished aluminum dome and clear dome cover. Units only used 2 shifts 5 days/week for about 2 years. Dusty but great condition. |
|
