| Machine ID: |
2232
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vapor Degreaser |
| Brand Name: |
Pero |
| Short Description: |
Pero 2500/1V vapor degreasing system |
| Asset Description Notes: |
Pero model 2500/1V closed loop vapor degreasing with vacuum drying technology and sophisticated PLC control.
Rotary basket system with immersion, flooding, rinsing, ultrasonic and vapor cleaning cycles. Max basket 20.8" x 14.3 x 9.8".
Continuous distillation and filtration ensures the highest level of cleanliness. Distillation rate for Perch 58 gal/hr.
Fully integrated parts handling system using automatic conveyors.
Cleaning cycle times as low as 5 minutes.
Complies with the federal NESHAP's and state and local regulations for hazardous air pollutants.
Ultra low emissions and economical solvent consumption using EPA approved solvents.
Built to CE standard to ensure safety compliance.
Pero has 30 years experience in design and manufacture of closed loop degreasers.
Over 3000 Pero systems installed worldwide. |
| Machine ID: |
2229
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Powder coating |
| Brand Name: |
Powder-X Coating Systems LLC |
| Short Description: |
Automated Powder-X Coating System |
| Asset Description Notes: |
2007 Automated Powder-X Coating System.
-Total system footprint as currently laid out is approximately 91 ft x 77 ft x 14 ft H.
- System can be reconfigured simply by changing the conveyor layout.
- Maximum part size is 30" W x 60" H x 72" L.
- Rapid Flex Conveyor, Chain, Drive, Take-Up, & Oiler included.
- Variable Line Speed 3-8 feet per minute (FPM)
- Pneumatic Take-Up
- Automatic Line Oiler
- 3-Stage Washer
- Honeywell Controllers & Flame Relays
- 1st Stage Heated (140° max)
- 2,000,000 BTU Eclipse Gas Burner
- 400° Single Pass Post Wash Dry-Off Oven
- 10,185 CFM Hot Air Movement to ensure proper drying
- Automatic Fire Detection
- Eurotec Model Spray Booth
- 10 Automatic Guns Included
- 4 Color Modules
- 3 Pass Post Coat Cure Oven (450° Max)
- 1,650,000 BTU Gas Burner
- 5" Thick Insulated Panel Construction |
| Machine ID: |
2188
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Blast Clean |
| Brand Name: |
Empire Abrasive Equipment |
| Short Description: |
Empire Abrasive Equipment, model EF-2448, sand blast cabinet. |
| Asset Description Notes: |
Empire Abrasive Equipment, model EF-2448, sand blast cabinet. PRAM dust/reclaim system. Cabinet Inside dimensions 24"D x 48"L x 23"H. Door type- 2 piece, door dimensions 47"W x 23"H. 14 ga steel cabinet, rubber lined gloves, blast foot pedal. 90 watt lighting, 14" x 22" sight window, MH-4 blast gun. |
| Machine ID: |
2142
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Spin Dryers |
| Brand Name: |
New Holland |
| Short Description: |
New Holland K90, 18" x 18" centrifugal spin dryer. |
| Asset Description Notes: |
New Holland K90, 18" x 18" centrifugal spin dryer. 2HP, 625 RPM, 150lbs capacity, Basket 18" x 18". Electric heat. |
| Machine ID: |
2141
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Spin Dryers |
| Brand Name: |
Nobles |
| Short Description: |
Nobles T28, 12" x 18" centrifugal spin dryer. Model T28. |
| Asset Description Notes: |
Nobles T28, 12"x18" centrifugal spin dryer. 12" x 12" Stainless basket. TECO 1HP Explosive proof motor, 230/460V, 3 phase, TEFC 143T, RPM 1745 . 100lbs load capacity. No Heat. |
| Machine ID: |
2140
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vibratory |
| Brand Name: |
Roto Finish |
| Short Description: |
Roto Finish SVP 5 Vibratron, vibratory deburr tub, 5 cubic ft. |
| Asset Description Notes: |
Effectively performs operations such as deburring, descaling, degreasing, cleaning, and removing flash. Fiberglass noise cover. SVP 5 has a maximum operating capacity of 5 cu. ft. 1.5HP motor. NEMA 1 panel with process timer and hour meter. LMI soap pump, 4" urethane pop-in drain. Tub 15.63"D x 15.25"W x 44.50"L. Sound enclosure. |
| Machine ID: |
2139
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Spin Dryers |
| Brand Name: |
Nobles |
| Short Description: |
Nobles T88, Centrifugal Spin Dryer, 18" x 18" basket. |
| Asset Description Notes: |
Nobles T88, Centrifugal Spin Dryer, (1) Stainless 18" x 18" basket. 150lbs capacity, 600 RPM, 2HP. Electric Heat-2000/4000 Watts. Control Box. New Cost $8600. Owner never put it into use, their loss your gain. Take immediate delivery. |
| Machine ID: |
2084
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Blast Clean |
| Brand Name: |
Rosler |
| Short Description: |
Rosler SBM 1520, Continuous Loop Belt Conveyor Through Feed Machines. Tumble and shot blast system. |
| Asset Description Notes: |
(2) Rosler 1520 SBM Continous Loop Belt Conveyor Through Feed Machines. Tumble and shot blast systems. Rosler maintained, 1 owner units. Stainless Steel shot or grit media can be used. Each unit has 2 blast wheels, loader, conveyor, Manganese V-shaped loop belt, media elevator, media air cleaner, Reverse pulse dust collectors(4 cartridges). Belt Diameter 11.42", (2)Wheel Motors 10.2 HP, Parts Min Diameter .390", Parts Max Diameter 7.48", Vent Air Flow 17,850 CFM. Each unit can process 3000 lbs/hr. Programmable speeds for different processes. Machines ideally suited for treating small, high-volume bulk components. The design of the V-shaped loop belt creates a screw-like movement of the parts through the machine, which ensures homogenous treatment of all parts. Price is each. Cost New from Rosler is $250,000. |
| Machine ID: |
2057
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Aqueous Wash |
| Brand Name: |
Hurricane |
| Short Description: |
Hurricane 5018W-R-80-D, 2 stage aqueous parts washer. 18" belt. |
| Asset Description Notes: |
Hurricane 5018W-R-80-D, 2 stage aqueous belt parts washer. Opening 19"H x 22"W, Belt 18"W x 336"L. Approximately 10 baskets included, 22"L x 13"W x 6"D. Gas heat, Oil Skimmer & filter, Watlow temp controls. Stations: Wash 360°(3 manifolds), Rinse 360°(2 manifolds), Dry(2 Air knives). Pre-stage/end roller conveyors included. |
| Machine ID: |
1904
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Deburring |
| Brand Name: |
Sintobrator |
| Short Description: |
Sintobrator EVF-04 centrifugal roll flow finisher. Only 152 hours. |
| Asset Description Notes: |
Sintobrator EVF-04 compact centrifugal disk roll flow wet media finishing machine. The tub has rotating bottom disc and stationary wall. Centrifugal force is caused by the high speed rotation of bottom disk resulting in toroidal flow of media and parts. Tub rotates 90° for easy emptying. Bowl 17" dia x 12" deep. 1.6 cu ft overall; 1 cu ft working load capacity. GE 300 Line Control. Timer(60 mins), Hour Meter, Low 152 hours! FILE PHOTO INCLUDED FOR CLARITY. |
| Machine ID: |
1799
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vapor Degreaser |
| Brand Name: |
Branson |
| Short Description: |
Branson L400 immersion vapor degreaser with heat. |
| Asset Description Notes: |
Branson Model L400, immersion type degreaser. 2 Inside Sumps, dimensions - 10" x 12" x 10" and Spray Wand. Heated Sump for cleaning side. "Cold Trap", 3/4 hp refrigeration to minimize vapor loss. Stainless construction. 9 gallon solvent capacity. |
| Machine ID: |
1709
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Aqueous Wash |
| Brand Name: |
Proceco |
| Short Description: |
Proceco Typhoon HD42-108 Aqueous Parts Washer |
| Asset Description Notes: |
Proceco Typhoon HD 42-108-E-2500-CO-2-2RD-SS turntable aqueous parts washer with Steam heat. Ideal for large individual parts or baskets of small parts. Applications include degreasing, surface treatment and phosphating. Center Nozzle Pipe "CNP" oscillates vertically. 42" dia turntable with 108" vertical clearance for work. It has a programmable wash, rinse and dry cycle. The initial aqueous recirculated wash cycle is followed by a hot water recirculated power-spray rinse to remove remaining detergent residue. Proceco parts washers with recirculated rinse have two integrated storage tanks, one for the wash solution and another for the rinse solution. Each tank has its own heating system and pump feeding separate spray manifolds in the main spray cabinet. 2 Bag filters. Options: All stainless steel construction, Automatic Oil Skimmer, Secondary Access door, Auto Chemical Make-Up for wash tank, Valves send solution to Flushing Pipe on door. 350-gal wash tank; 190-gal rinse tank, auto replenishment. Exhaust blower 1000 CFM, High Level and Overflow alarms. All manuals and Prints available. Call for further details. |
| Machine ID: |
1684
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Aqueous Wash |
| Brand Name: |
Greco Brothers |
| Short Description: |
Greco Brothers Aqueous Continuous solution agitation, 4 station line. |
| Asset Description Notes: |
Greco Brothers Aqueous continuous solution agitation, 4 station line. Manual parts washing line, All Stainless construction. All stations heated, 4th Station is Forced Air Drying station. Wash(2) and Rinse(1)stations have recirculation pumps with filtration and first 2 stations have continuous agitation. Accommodates 16 x 14 x 12"D baskets. The recirculation pump provides liquid agitation while oils, grease and other contaminants are continuously skimmed, separated and filtered. Owner will run samples for you, call to see. |
| Machine ID: |
1677
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Blast Clean |
| Brand Name: |
BCP |
| Short Description: |
Blast Cleaning Products(BCP) Wheelabrator Multiple Table Shot Blast Machine |
| Asset Description Notes: |
Blast Cleaning Products(BCP) Multiple Table Shot Blast Machine. This machine includes a blast reclaim system, 5(five) Individual 42" x 1/2" tables, 4 Blast wheels(26.5" Dia. x 2.5" W wheels), we blast cylinders up to 22" dia. and 42" tall but system can handle some what larger parts and we have an extensive supply of on hand wear parts. Blast media or shot used has been S-170 steel shot. 2 Blast stations with adjustable blast cycle times. 2500 CFM cartridge dust collector. Complete abrasive reclaim system. Prints and Manuals available. Wheelabrator now owns BCP line. Used for finishing telephone pole transformer cases. Can also be used to refinish LPG cylinders. Call for complete machine specs or any questions for the seller. Machine coming off line in July 08. New in 1991 machine $225K. |
| Machine ID: |
1637
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Centrifuges |
| Brand Name: |
Harshaw |
| Short Description: |
Harshaw No. 1, spin drier, 12 x 12" centrifuge. |
| Asset Description Notes: |
Harshaw No. 1, spin drier, 12 x 12" basket. Type NH, Speed 725 RPM, NO HEAT. |
| Machine ID: |
1636
Click here to see machine details |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Tumbling |
| Brand Name: |
Baird |
| Short Description: |
Baird No. 2D tumbling barrel, 6 cuft. |
| Asset Description Notes: |
Baird No. 2D tumbling barrel. 3/4 HP Master motor. Barrel dimension 22"W at mouth, 23" Deep, 26"W at bottom. 12 sided barrel, no liner. 6 cu. ft. barrel. |
| Machine ID: |
1966 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vertical Agitation |
| Brand Name: |
RAMCO |
| Short Description: |
Ramco, Migi Kleen MK48ESS, heated aqueous vertical agitation parts washer. |
| Asset Description Notes: |
Ramco, Migi Kleen MK48ESS, heated aqueous vertical agitation parts washer. Complete with Timer, 250 deg F heater(9 kw), Filtration and Turbulation. Made of Stainless Steel. Working tank area 46 x 21 x 16"Deep. Capacity 120 gallons, 80-125 PSI required, Table Capacity 150 lbs. 20-240 Stokes per minute, Short stroke 2-4" and Long stroke 5-9". |
| Machine ID: |
1813 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Aqueous Wash |
| Brand Name: |
Proceco |
| Short Description: |
Proceco Typhoon HD-62-48 aqueous washer |
| Asset Description Notes: |
Proceco Typhoon HD-62-48-G-2500-2-R-HBO-SS Heavy Duty aqueous parts washer. 62" diameter turntable with 48" height clearance. 2,500 lb load capacity. Has 1,000-lb hoist. 600 gal recirculating wash tank, 295 gal fresh water rinse. Natural gas burner dry off heat source (shown removed for shipping). Oil coalescing unit with skimmer. All 304 stainless construction. |
| Machine ID: |
1797 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Spin Dryers |
| Brand Name: |
New Holland |
| Short Description: |
New Holland 12" K-23 electric spin dryer |
| Asset Description Notes: |
New Holland, K-23 electric spin dryer. Electric heat(4000 watts),"Soft Start", Forward, Reverse and foot brake. Basket Size: 12" x 12"(No Baskets), Operating Speed 825 RPM, 1 HP, Capacity 75lbs, 5.25" exhaust outlet. Save $$$, new cost is over $4K. |
| Machine ID: |
1793 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Aqueous Wash |
| Brand Name: |
Chematic |
| Short Description: |
Chematic belt parts washer, 3 stage aqueous. Model 2418-1SS. |
| Asset Description Notes: |
Chematic 3 stage belt parts washer. S/S Belt 24" Wide, 18" Max height. 25 lbs per square foot part capacity. All 316 Stainless construction including pipes and nozzles, can support mild acid solutions at 100 GPM, 30 PSI nominal. Wash Station: 3 wash manifolds, Drip station, and Dry station. Wash station manifolds surround the conveyor belt(top/bottom/sides). (2) 12kw heaters for solution, Temp range 140-180 deg F. Drip station collects runoff solution through a screen and then through a Belt type Oil Skimmer before being recirculated to main sump. 10 hp Blower for 2 Air Knives in Dry station above and below the belt. 3 hp stainless pump. Drip station can be modified to a rinse station, with heat and PH controls if needed, ask for a quote on this feature. This machine was never put into a Production environment, used as DEMO unit, call to inspect. |
| Machine ID: |
1742 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Aqueous Wash |
| Brand Name: |
Jenfab |
| Short Description: |
Jenfab Aqueous 24" Belt Type Cleaning system. |
| Asset Description Notes: |
Jenfab Aqueous 24" Belt Type Cleaning system. Wash, Rinse, and Dry stations. 304 Stainless Steel construction, SS Belt, Coalescing Oil Skimmer. Steam heat, 2 Insulated Solution Tanks are heated 160-180 deg F, both tanks have a column filter. Mouth opening 24" H x 25" W. Wash Stage: 20" entrance, 48" spray wash, 24" drain area(wash nozzles positioned above/below and both sides of belt). Rinse/Rust Inhibitor Stage: 24" Rinse/Rust Prevent, 24" Drain area. Dry Stage: 72" area 4 High Pressure air knives above and below, 2 Air Knives per side. Belt Speed 7-10 FPM. Chip Collection trays. Manuals and Drawings available. Call for more details. |
| Machine ID: |
1601 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Drum/Screw type |
| Brand Name: |
FJC Associates |
| Short Description: |
FJC 3-stage internal helix parts washer S/N MDRW 2854. |
| Asset Description Notes: |
FJC Associates stainless 3-stage internal helix variable speed parts washer. Wash and rinse tank temps independently controlled. Dry temp adjustable. Electric heaters. 1-1/2 HP pump motors. 19" Drum Diameter, 2.5" long screw veins on 8" spacing. All components easily replaced from standard industrial hardware catalogs. |
| Machine ID: |
1600 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vibratory |
| Brand Name: |
Vibrodyne |
| Short Description: |
Vibrodyne finishing machine, 4 cubic foot, VE 400 model. |
| Asset Description Notes: |
Vibrodyne finishing machine, 4 cubic foot, VE 400 model. The only moving part is the tub, lined and molded in place with heavy-duty polyurethane and suspended on rugged, alloy-steel I-beam springs. The epoxy-encapsulated electro-magnets provide the energy to vibrate the tub at 3600 cycles per minute. Parts and media roll full circle within the tub providing complete contact and continuous scrubbing action on all your parts. Weight capacity 600 lbs, Internal Dimensions: 31-3/8"L x 17"W x 13-7/8"D, Chute 6". Amplitude 0-1/4" and Shake Force to 60 G's. Corn cob or Ceramic deburr Media available also, ask. Nice unit under power on the seller floor. |
| Machine ID: |
1526 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vertical Agitation |
| Brand Name: |
Ramco |
| Short Description: |
Ramco Migi Kleen MK30 immersion agitation parts washer. |
| Asset Description Notes: |
Ramco Migi-Kleen is an immersion parts washer designed for the removal of oils, chips and dirt from a wide range of components. It accomplishes this using a simple and rugged pneumatically powered reciprocating platform. No Heat or Turbo. 40 gallon Agitating Parts Cleaner for use with solvents or aqueous. Solution Level: 16". Pneumatically operated lift platform 150 lbs capacity. Stroke 2" to 4". Dipping space 22" FB X 30" LR X 21" D. Work Platform: 29" x 18". The operator loads contaminated parts or basket(s) of parts onto a sturdy transport elevator.
With the simple flip of a switch, the elevator automatically lowers the work into the immersion chamber and reciprocates, up and down, up to 240 strokes per minute. Vigorous mechanical agitation swishes solution against all surfaces, in and around holes and recesses.
Stubborn contaminants are washed away with complete ease and without hand labor. The operator returns at his/her convenience, flips the switch and the transport elevator rises to the original loading position. Video Available, ask for it. |
| Machine ID: |
1392 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vertical Agitation |
| Brand Name: |
Graymills |
| Short Description: |
Graymills Liftkleen TC2420L vertical agitation parts washer. |
| Asset Description Notes: |
Graymills TC2420L vertical agitation parts washer. 47 gallon Agitating Parts Cleaner for use with solvents or aqueous. Pneumatically operated lift platform capable of handling 125lb loads. Dipping space 24"L x 20.5"W x 12" Deep immersion. Turbo agitation of the fluid at 3,000 GPH automatically scours and flushes parts clean.
2 units available, price is each. New $3200 from Graymills. |
| Machine ID: |
1378 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vibratory |
| Brand Name: |
SWECO |
| Short Description: |
Sweco Vibro Energy Finishing Mills, FM1 and FM3 combo. |
| Asset Description Notes: |
Sweco Vibro Energy Finishing Mills being sold as a package. FM1 model, S/N: 1FM-265-26, 1 cubic foot capacity, 200 lbs capacity, 1725 RPM, 1/4 HP, Weight 285 lbs. FM3 model, S/N: 3FM-1062-34, 3 cubic foot capacity, 1140 RPM, 1 HP, Timer, Weight 550 lbs. Parts chutes on both. Come inspect them for yourself on the seller floor. |
| Machine ID: |
1337 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Spin Dryers |
| Brand Name: |
New Holland |
| Short Description: |
New Holland, K-23 electric spin dryer. |
| Asset Description Notes: |
New Holland, K-23 electric spin dryer. Electric heat(4000 watts),"Soft Start", Forward, Reverse and foot brake. Basket Size: 12" x 12"(No Baskets), Operating Speed 825 RPM, 1 HP, Capacity 75lbs, 5.25" exhaust outlet. Save $$$, new cost is over $4K. |
| Machine ID: |
1318 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vertical Agitation |
| Brand Name: |
Graymills |
| Short Description: |
Graymills LiftKleen TH3626SLP-B, heated vertical agitation washer. |
| Asset Description Notes: |
Graymills LiftKleen TH3626SL. Water-Based Insulated tank. Heated Immersion Turbo-Action parts cleaniner @ 3,000 GPH. A perforated platform supports the parts above the "V" shaped bottom specially designed for easy sludge collection. The lift platform makes parts loading and draining easy at tank top level but agitates them while immersed in the cleaning fluid. Features a 32L x 24W pneumatically operated lift platform capable of handling 200lb loads. Dipping space 34"L x 25.5"W x 18"D. Sells for $5K new, save some bucks. |
| Machine ID: |
1298 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vapor Degreaser |
| Brand Name: |
Branson |
| Short Description: |
Branson L400 vapor degreaser |
| Asset Description Notes: |
Branson L400-R basket type parts Degreaser. * 240F max Temp. * No sonics * 2 sump design for dirty and clean solvent * Each sump 10" x 12" x 8
" * No ultrasonics *
|
| Machine ID: |
1292 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vapor Degreaser |
| Brand Name: |
Baron Blakeslee |
| Short Description: |
Baron Blakeslee MVR-215 vapor degreaser with hoist |
| Asset Description Notes: |
Baron Blakeslee MVR-215 vapor degreaser with shop air operated auto hoist. Single tank. Includes basket with cover. Hoist can be set for immerse time and dry time. Includes foot operated spray wand.
Can be purchased without hoist $3,500
|
| Machine ID: |
1259 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Drum/Screw type |
| Brand Name: |
FJC Associates, Inc. |
| Short Description: |
FJC Dual 15" Stainless Steel drum screw type parts washer. |
| Asset Description Notes: |
Frank Coscina Associates Inc. Dual 15" Screw/Drum parts washer. *Rotary Screw Type *Dual 3 CuFt Auto vibratory parts feeding into the screws. *Unit has 3 wash tanks. Set up for 1 wash and 2 rinse. *Unit has (2)1/2 hp blowers w/ 29 kW hot air dryers. *Unit has exhaust blower.
*Unit is electrically powered -(3) 15kW electric heating coils. *Unit has a separate in line oil skimmer that removes all oils from baths.
*Unit is in new condition and under power for Demos. |
| Machine ID: |
1152 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Blast Clean |
| Brand Name: |
Empire Abrasive Equipment Co. |
| Short Description: |
Empire Abrasive Equipment Co Dry Blast Cabinet w Vacuum |
| Asset Description Notes: |
Empire Abrasive Equipment Co Dry Blast Cabinet w Vacuum. Glass View is 22" x 14" High. Foot Petal. Inside chamber is 24"x36"x23". Outside dimensions 24"x36"x65". Model EF2436. Hand wand and rubber gloves in good condition. Blast gun MH-2A, 90 watt light, 30 gal. dust collector. Motor fan 1 HP/133 CFM. |
| Machine ID: |
969 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Vibratory |
| Brand Name: |
Sweco |
| Short Description: |
Sweco FMD-7LR vibratory finisher,7 cu.ft. |
| Asset Description Notes: |
Sweco FMD-7LR, 7 cu. ft. vibratory finisher with seperator. Excellent unit with little use, stones included in the bowl. 4 Screen Assemblies: 5/8", 7/8", 1", & 1-3/8". Liner is original, new shape. Bowl 44" ID, 13" Deep, discharge height to floor 24". Currently powered on the shop floor, needs nothing but a new home. Paid $15,072 New in 1998. Must see! |
| Machine ID: |
960 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Aqueous Wash |
| Brand Name: |
FJC |
| Short Description: |
FJC Duel Screw 15" dia parts washer |
| Asset Description Notes: |
Frank Coscina Associates Inc. Duel 15" Screw/Drum parts washer. *Rotary Screw Type *Duel 3 CuFt Auto vibratory parts feeding into the screws. *Unit has 3 wash tanks. Set up for 1 wash and 2 rinse. *Unit has (2)1/2 hp blowers w/ 2 9 kW hot air dryersr. *Unit has exhaust blower. *Unit is electrically powered -(3) 15kW electric heatin coils. *Unit has a separate in line oil skimmer that removes all oils from baths. *Unit is in new condition. * Serial # MDRW 2345 |
| Machine ID: |
902 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Degreasers |
| Brand Name: |
Baron Blakeslee |
| Short Description: |
Baron Blakeslee degreaser, model MVR-215. |
| Asset Description Notes: |
Baron Blakeslee MVR-215 vapor degreaser.
Refrigerated R12 2Lbs 8oz 115V. Inside sump - 21" x 12", ss sliding cover, outside dimensions - 32"L x 33" W x 44" H approx. Modified to dip and lift a basket via pneumatic piston. Has a timer panel to set dip time and dry time with foot switch. Used for Trichlor, High heat set for 225 degrees F and Lo heat 175 degrees. No Sonics. |
| Machine ID: |
853 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Degreasers |
| Brand Name: |
Branson |
| Short Description: |
Branson Model B400-R Ultrasonic Degreaser - Cleaner |
| Asset Description Notes: |
Branson Ultrasonic Vapor Degreaser Model B400-R Ultrasonic * Two sided cleaning - Ultrasonic side and turbo. - Clean & Dirty side * This unit was manufactured to be used with Freon Fluorocarbon Solvent but may not meet current regulations. * Can be used as an aqueous cleaner.
* Has recently been inspected and recharged with freon. A new tank recirculating pump has also been installed. Stainless construction,
40 Khz ultrasonics; inside sump dimensions - 10" x 12", outside dimensions - 31.5" x 27" x 46.5"H, 9 gal. solvent capacity, 3/4 hp refrigeration, 400 lbs. shipping weight. |
| Machine ID: |
774 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Spin Dryers |
| Brand Name: |
M&T Harshaw |
| Short Description: |
M&T Harshaw Heated Spin Dryer with 36 inch diameter drum |
| Asset Description Notes: |
M&T Harshaw Heated Spin Dryer with Unloading work station. * 2 316 Stainless Steel spinner baskets included. * Unloading station dumps the spinner into totes or barrels. * Super Samson Model. * Dryer cost new $13.5 Basket cost is $1.7k , Dumper is $3.5k now. Save a bundle! Overhead gantry crane is available also - call for price. |
| Machine ID: |
659 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Aqueous Wash |
| Brand Name: |
FJC |
| Short Description: |
FJC Duel 15" SS drum screw type 3 bath parts washer |
| Asset Description Notes: |
Frank Coscina Associates Inc. Duel 15" Screw/Drum parts washer. *Rotary Screw Type *Duel 3 CuFt Auto vibratory parts feeding into the screws. *Unit has 3 wash tanks. Set up for 1 wash and 2 rinse. *Unit has (2)1/2 hp blowers w/ 2 9 kW hot air dryersr. *Unit has exhaust blower.
*Unit is electrically powered -(3) 15kW electric heatin coils. *Unit has a separate in line oil skimmer that removes all oils from baths.
*Unit is in new condition. *Seller willing to form some kind of agreement on fitness of operation for buyer. Machine builder in business and will service machine if required. |
| Machine ID: |
506 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Deburring |
| Brand Name: |
Rosler |
| Short Description: |
Rosler FKS 15.1E, high energy disc finishing system |
| Asset Description Notes: |
Rosler FKS 15.1E, single disc high energy finishing bowl. Unit is complete. Has auto dumping and capacity is 2 cu. ft. of working volume. Includes LMI diafram soap pump.
|
| Machine ID: |
499 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Aqueous Wash |
| Brand Name: |
Ransohoff |
| Short Description: |
Ransohoff Aqueqous Ultrasonic Immerso-Jet 6 basket, 2 wash, 2 rinse cleaning machine Serial # 4195 |
| Asset Description Notes: |
Ransohoff Aqueous Ultrasonic and spray jet parts washer. Model: Ransohoff Immerso-Jet HC-6. MachineUnit has 2 washing chambers, 2 rinsing chambers and 1 heated hot air dry chamber. Unit has 5 ultra sonic generators - 4 regular and one Pule / Sweep generator. System has 12 baskets - and handles 6 baskets at a cycle. Machine under power and ready to test clean your parts. Call for details.
Ransohoff Immerso-Jet HC-6 Machine
Multi-Stage Wash, Rinse & Drying System with spray nozzles & ultrasonics generation, in-line oil skimming and filtration
Unit processes 6 baskets of product per cycle, typical 15 minute cycle --> 300 lb/hr
All contact surfaces: stainless steel
Basket Dimensions: 12" x 18" x 6". Stainless steel.
480V, 3 ph, 60Hz.
Siemens PLC control and operator interface panel
Footprint approx. 8 ft x 12 ft x 6 ft tall
Wash Tank Cap = 325 gal, Rinse Tank Cap = 325 gal
|
| Machine ID: |
497 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Deburring |
| Brand Name: |
Rosler |
| Short Description: |
Rosler High Energy Deburring System FKS 35.1 A-2.- Complete |
| Asset Description Notes: |
Rosler High Energy Deburring System with 500kg max load bowls. Bowls replaced/relined 4/04 & 9/04 and in new condition. Magnetic separator, full sound enclosure with two sets of double doors on all sides. Each machine has fully programmable cycles with auto-loading/unloading and in-line separation device. Process capacity is 6 ft3. Call for more information. Model # FKS 35.1 A-2.
2 systems available
|
| Machine ID: |
468 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
SuperFinishr |
| Brand Name: |
Lacquire/Paint Line? |
| Short Description: |
1500 Spindle Lacquire/Paint line w Randsburg Electrostatic |
| Asset Description Notes: |
1500 Spindle (Approx)lacquire or paint line with two separate application and curing chambers. Electrostatic Randsburg Disc Static Electric Sprayer and ITW DeVillbis Spray gun/station. Dwyer Mark II Vacuum gauges on both booths.
Thousands of spare spindles and differnt size cap tops - Approximately 8 differnt job set up possiblilties on hand. Box of 5000 spindle straws and spare air filters. Unit under power and ready for the next job.
Koby Jr. Air Purifiers all over the unit. ITW DeVillbis Air filtration unit. All power disconnects included. Operators available for interviewing. Unit has electric heat curing chambers. Very clean. Spare sprockets, bearings, belts, chain and more.
|
| Machine ID: |
467 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
SuperFinishr |
| Brand Name: |
Lacquire/Paint Line |
| Short Description: |
1500 Spindle lacquire/Paint line w Flynn Flame Burn Off System |
| Asset Description Notes: |
1500 Spindle (Approx)lacquire or paint line with application curing chambers. Line has a Flynn Flame Plasma Analyzer Burn off System with 4 heads, Julie 7.5 kV Static Newtralizer and a Simco Magnum Force Ionizing Knife. Line has an ITW DeVillbis Spray gun/station also. Dwyer Mark II Vacuum gauges on both booths.
Thousands of spare spindles and differnt size cap tops - Approximately 8 differnt job set up possiblilties on hand. Box of 5000 spindle straws and spare air filters. Unit under power and ready for the next job.
Koby Jr. Air Purifiers all over the unit. ITW DeVillbis Air filtration unit. All power disconnects included. Operators available for interviewing. Unit has electric heat curing chambers. Very clean. Spare sprockets, bearings, belts, chain and more.
|
| Machine ID: |
456 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
Degreasers |
| Brand Name: |
Ultra-kool |
| Short Description: |
Ultra-kool turbo wash tub. |
| Asset Description Notes: |
Ultra-kool cleaning unit, used Trichlorethylene 112. Stil included, 2'x 5' basket and a rotary basket also. 2 zone cooler. Air powered Overhead hoist.
Model 55-20-15.
|
| Machine ID: |
314 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Finishing-Cleaning |
| Machine Type: |
SuperFinishr |
| Brand Name: |
Almco Industrial Finishing |
| Short Description: |
Almco 2 sided barrel tumbler model DB-200 w/ shaker tray |
| Asset Description Notes: |
Almco Industrial Finishing Barrel Tumbler w/ timer and two separate compartments. Model DB-200. Shaker tray un load to fill a tote. Has a 13.8 total cubic foot drum = 2 sided at 6.9 cuft per side. Drum is 32"long x 30" dia. Wear resistant steel drum.
|
|
