| Machine ID: |
2125
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Pumps |
| Brand Name: |
ITT Bell & Gossett |
| Short Description: |
ITT Bell & Gossett centrifugal pumps for Hydronic Heating and Cooling Systems. |
| Asset Description Notes: |
(4)Bell & Gossett base-mounted, end-suction Series 1510 pumps. The PUMPS were purchased for an eight story, 250,000 square ft office building which went bankrupt while under construction. The PUMPS were never shipped to the jobsite but have been stored in a warehouse. Because they were to be located in a penthouse on top of the building and were going to be installed in January, we elected to fabricate and mount the 10" supply and discharge headers to the pumps, mount the pumps on the inertia bases and mount the inertia bases on 4" I beams. Each skid would then be lifted to the penthouse with the building tower crane. BLP-1,2 are on one skid and CTP-1,2 are on the other skid. Each skid weighs approximately 7800 lbs.
DATA:
BLP-1,2 (2 units) B & G Model 6E Series 1510, 40 hp, flow-1440 gpm, head - 75 ft, RPM - 1800, 230/460/3/60, ODP Energy Efficient
CTP-1,2(2 units) B & G Model 6BC Series 1510, 30 hp, flow 1872 gpm, head 50 ft, RPM 1800,208-230/460, ODP Energy Efficient.
Kinetics Isolation Bases (4 units) w/spring isolators Model CIB-L 74"Lx34"Wx6"D.
CONFIGURATIONS:
BLP-1,2 CONTAINS: 8" Suction Diffuser, flex connector, butterfly valve (all on suction side), 6" flex connector and 8" triple duty valve (on discharge side).
CTP-1,2 CONTAINS: 8" Butterfly valve and flex connector (on suction side), 8" Triple duty valve (on discharge side).Unit shipping weight: 7800 lbs (BLP-1,2)weights include inertia bases.
Price is each or buy all (4) for $10K plus freight.
|
| Machine ID: |
2123
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Make Up Air Fans |
| Brand Name: |
Twin City Fan & Blower |
| Short Description: |
Twin City 10,700 cfm centrifugal roof exhauster |
| Asset Description Notes: |
Twin City Fan & Blower backward curved centrifugal belt driven roof exhauster type BCRD size 300C. Nominal performance 10,700 scfm @ 0.5"H2O ga, 816 rpm, 2.43 BHP. Fits 34.5" x 34.5" roof opening. Includes galvanized bird screen, galvanized, canted, insulated, 12"H roof curb and disconnect switch. Motor is 3HP, 1750 rpm 460/3/60 enclosed ODP. regreasable pillow block ball bearings providing an average life of 500,000 hours. Price is each. Lot consists of (2) units. LOT PRICE $1,700. |
| Machine ID: |
2122
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Make Up Air Fans |
| Brand Name: |
Twin City Fan & Blower |
| Short Description: |
Twin City 10,800 cfm centrifugal roof exhauster |
| Asset Description Notes: |
Twin City Fan & Blower backward curved centrifugal belt driven roof exhauster type BCRD size 300C. Nominal performance 10,800 scfm @ 1.5"H2O ga, 950 rpm, 4.52 BHP. Fits 34.5" x 34.5" roof opening. Includes galvanized bird screen, galvanized, canted, insulated, 12"H roof curb and disconnect switch. Motor is 5HP, 1750 rpm 460/3/60 enclosed ODP. Regreasable pillow block ball bearings providing an average life of 500,000 hours. |
| Machine ID: |
2121
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Make Up Air Fans |
| Brand Name: |
Twin City Fan & Blower |
| Short Description: |
Twin City 10,000 cfm centrifugal blower |
| Asset Description Notes: |
Twin City Fan & Blower belt-driven centrifugal blower. Nominal performance 10,200 scfm @ 2.0" H2O ga, 1410 rpm, 6.75 BHP. With adjustable mounting brackets allowing 8 exhaust positions. Motor data 7-1/2HP 230/460/3/60 motor enclosed ODP. Shaft is 1045 steel. Pillow block bearings heavy duty lube for minimum average life 200,000 hours. Price is each. There are (3) fans in the lot. LOT PRICE $3750 |
| Machine ID: |
2120
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Pumps |
| Brand Name: |
ITT Bell & Gossett |
| Short Description: |
ITT Bell & Gossett 1HP series 60 pump |
| Asset Description Notes: |
ITT Bell & Gossett 1HP series 60 2 x 2 x 5-1/4 in line centrifugal pump. Bronze fitted, internally self-flushing mechanical seal, XL II lube system, Buna/carbon-ceramic seal (-20°to 225°F). Max working pressure 175 psi. Design capacity 115 gpm @ 16 ft head. 2" suction and discharge. |
| Machine ID: |
2115
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Expansion tank |
| Brand Name: |
ITT Bell & Gossett |
| Short Description: |
ITT Bell & Gossett B-130LA expansion tank |
| Asset Description Notes: |
ITT Bell & Gossett B-130LA ASME rated precharged (12 psi) bladder-type vertical expansion tank. Tank volume 34 gal; acceptance volume 27 gal. Construction: Carbon steel shell, heavy duty butyl rubber replaceable bladder, 1" NPT system connection, 3/4" drain plug. Max design pressure 125 psi; design temp 240°F. Designed and constructed per ASME section VIII, division 1. |
| Machine ID: |
2109
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Heat Exchangers |
| Brand Name: |
Accu-Therm |
| Short Description: |
Mueller Accu-Therm 80M heat exchanger |
| Asset Description Notes: |
Mueller Accu-Therm plate model 80M HV/V /LB-20 water/water heat exchanger. Heat transfer area (all frames) 1518.5 sq ft. 9.3 MM Btuh with cold side 1872 gpm 85°F in/95°F out and hot side 1440 gpm 103° in/90°F out. |
| Machine ID: |
2035
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Make Up Air Fans |
| Brand Name: |
TC Aerovent |
| Short Description: |
Axico Anti-Stall® FPDA vane axial fan |
| Asset Description Notes: |
TC Aerovent Axico Anti-Stall ® Compact Design direct drive vane axial make-up air fan rated at 70,000 scfm vs. 6.69 "wg total pressure with blades at 45°. Model FPDA-2-140-6-8-1750-100. Optional 140-6 diffuser available (add 30" to length). The Axico fan is a vaneaxial fan with 100% stable operation. It has no stall area and no stall limit. Model FPDA constant air volume fan impellers are equipped with mechanically-fixed, individually manually-adjustable blades that may be re-pitched when the fan is stopped. |
| Machine ID: |
1983
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Boilers |
| Brand Name: |
Burnham |
| Short Description: |
Burnham 100HP hot water boilers (2) |
| Asset Description Notes: |
Burnham Model 4FW-450A-45-G-PF hot water boilers,
Serial numbers 19661 and 19572. Rating (each): 100.0 HP OUT, 3,348 MBH out/4185 MBH in.
Dimensions (each): Approx 93” L (w/o burner) X 53” W X 83” H , plus 36” L for burner ea.
Burners: Power Flame Model C3-G-25 Serial numbers 059049950 and 059049951. 4,718 Max MBH (each). Two (2) units available. Price is each. Breeching (lowest photo) can be had for $1,800. |
| Machine ID: |
1980
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Boilers |
| Brand Name: |
Eclipse |
| Short Description: |
(2) 80HP Eclipse steam boilers |
| Asset Description Notes: |
80HP Eclipse steam boilers - 2 available. Catalog number TF-G-Pro. Gas fired Mettler STFUE-G 8K6 burners. Water softener and make-up tank included. Rated at 125 psi. Price is each - both available for $9,000 Seller can load on flat bed. |
| Machine ID: |
1974
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Boilers |
| Brand Name: |
Hurst |
| Short Description: |
Hurst 80HP steam boiler |
| Asset Description Notes: |
Hurst 80HP steam boiler. Retubed 2008 - not used since. Includes condensate return and makeup water feed unit, softener, chemical feed pump for water conditioning additive. National Board certified for 150 psi. Seller will load on flatbed. |
| Machine ID: |
1950
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Temp Controller |
| Brand Name: |
Sterlco |
| Short Description: |
Sterlco water temp controller, model M8410-AX. |
| Asset Description Notes: |
Sterlco Mold Temperature Controllers (1 high profile and 1 low available). Model M8410-AX, 9KW, 460 Volts, 3/4 HP. Price each. |
| Machine ID: |
1690
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Chillers, H2O & Air |
| Brand Name: |
York |
| Short Description: |
60-ton York chiller |
| Asset Description Notes: |
York 60-ton chiller. Twin fan. Performance is 27°F outlet with 50-50 ethylene glycol/water. |
| Machine ID: |
1278
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Cooling Towers |
| Brand Name: |
Evapco |
| Short Description: |
Evapco 500 ton water cooling tower. |
| Asset Description Notes: |
Evapco water cooling tower, 500 ton capacity nominal @ 3000 GPM. Model AT 24-418B. Galvanized construction with Stainless strainers. PVC pressurized water distribution system with Drift Eliminators and Inlet Louvers. Per Evapco, unit needs to be split upper/lower for safe shipment. |
| Machine ID: |
995
Click here to see machine details |
| Category: |
HVAC Equipment |
| Machine Type: |
Boilers |
| Brand Name: |
Kewanee |
| Short Description: |
Kewanee Scotch Generator, 400 HP steam boiler. |
| Asset Description Notes: |
Kewanee Scotch Generator, Size LS400-06, 400 HP gas/oil boiler. Rating 13392 MBh, MAX working pressure Steam 15lbs - water 30 lbs. Heating Surface ASME 2000 sq ft. Firing Range 16470 MBh, valve capacity 13392 lbs per hour. No. 6 oil, Input Millions of BTU per Hr 21 MAX. Vision Series BC300 Periodic Sampling Boiler Control. |
| Machine ID: |
2114 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
HVAC Equipment |
| Machine Type: |
Boilers |
| Brand Name: |
LAARS |
| Short Description: |
LAARS Mighty-Therm hydronic 2000 boiler. 2 Million BTU/hr |
| Asset Description Notes: |
LAARS Mighty-Therm Hydronic HH2000 boiler (50 HP). 2 MBTU/hr Input, 1.6 MBTU/hr output. ASME 160 psi working pressure heat exchanger - "H" stamp. Two-stage firing rate, two-pass heat exchanger, Natural Gas fired with high & low gas pressure switches. 1-1/2" gas connection, 4" water connection, 22" vent pipe. |
| Machine ID: |
1860 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
HVAC Equipment |
| Machine Type: |
Cooling Towers |
| Brand Name: |
Evapco |
| Short Description: |
Evapco 225 ton evaporative condensor, water tower. |
| Asset Description Notes: |
Evapco 225 ton evaporative condensor, water tower. Model LSCB-225, centrifugal fan forced draft condenser. Drift eliminator system saves water. 15 HP Drive Motor, Refrigerant R22, Steel tubing(ammonia use), 5'x 7'x 5' stainless holding tank, and includes 2 pumps. Thermal Pak II coil, 400 psi coil test pressure. 1 Circuit unit. All pan and casing materials constructed of G-235 heavy gauge mill hot-dip galvanized steel. Quiet operation unit. System was used in food refrigeration application for 2 years to cool two 125 HP compressors. Drawing is available. System was $35k new 2000. |
| Machine ID: |
1372 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
HVAC Equipment |
| Machine Type: |
Air Conditioning |
| Brand Name: |
Koldwave |
| Short Description: |
Koldwave, model 3AK2412, Airmaster portable air-cooled air conditioners |
| Asset Description Notes: |
3 Units for sale, $1,200.00 EACH. Koldwave Airmaster is a free standing, air-cooled air conditioner/zone cooler suitable for indoor/outdoor use. This self contained unit is designed to direct cool air to specific areas or objects through dual 6" diameter nozzles, or a single 10" diameter flexible duct. Model 3AK2412 is rated at 24,000 Btu/h and a 9.55 EER. Price is each. Call owner direct (603) 627-6811
Call (603)627-6811 for direct contact with seller.
|
| Machine ID: |
1253 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
HVAC Equipment |
| Machine Type: |
Make Up Air Fans |
| Brand Name: |
Applied Air |
| Short Description: |
Applied Air, heated air make up fans. DFL model. |
| Asset Description Notes: |
Applied Air non recirculating direct industrial air heaters, Model DFL070HRS. MAXITROL controls, 3HP, Gas Fired, horizontal discharge, 480 volt, 5000 cfm each. 4 units available, price is each. The units have mfg date of 7/29/04, installed in Nov 2004 and discontinued use in May 2005. Taken out of service 11/16/2005. Units were removed off of roof, so no rigging costs required. Just pick them up. |
| Machine ID: |
1042 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
HVAC Equipment |
| Machine Type: |
Chillers, H2O & Air |
| Brand Name: |
Schreiber Engineering |
| Short Description: |
Schreiber Engineering, 2 ton air cooled chiller, portable. |
| Asset Description Notes: |
2 ton Air cooled chiller. Model 200 AC. 1HP water pump & 45 gallon reservoir, self contained. Refrigerent R-22, 8lb Charge, 3HP compressor, 1/2HP fan, pumps 30GPM, & 24,000 BTU/hr. |
| Machine ID: |
991 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
HVAC Equipment |
| Machine Type: |
Chillers, H2O & Air |
| Brand Name: |
Thermal Care/Mayer |
| Short Description: |
Thermal Care/Mayer TC series, 100 ton water cooled chiller. |
| Asset Description Notes: |
Thermal Care/Mayer 100 ton, 100 HP motor, direct drive water cooled central chiller. Model TCCW-20Z, FLA 120, Refrigerant R22 @ 160lbs, 30% Glycol, Min Temp 30 deg F, Max Temp 60 deg F. Condensor water requirement 300 GPM and Chilled water requirement 240 GPM. Cooling tower not included. |
| Machine ID: |
980 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
HVAC Equipment |
| Machine Type: |
Chillers, H2O & Air |
| Brand Name: |
Drake Refrigeration |
| Short Description: |
Drake, 5 ton chiller, fan cooled. |
| Asset Description Notes: |
Drake refrigeration, 5 ton, Refrigerant 22,
# of circuits: 1, charge per circuit: 9, compressor: 1, RLA: 9.6, LRA: 65.
Model: PACT 60S2-T4-HA
1/2 HP fan motor FLA 1.6, Tank circulation pump 1/3 HP FLA 1.3, System pump 1/2 HP FLA 1.3
Ref 278/144 High/Low PSIG, Water Side 60 PSIG. |
| Machine ID: |
763 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
HVAC Equipment |
| Machine Type: |
Chillers, H2O & Air |
| Brand Name: |
Drake Refrigeration Inc. |
| Short Description: |
Drake, 5 ton chiller, fan cooled. |
| Asset Description Notes: |
Drake refrigeration, 5 ton, Refrigerant 22,
# of circuits: 1, charge per circuit: 9, compressor: 1, RLA: 9.6, LRA: 65.
Model: PACT 60S2-T4-HA
1/2 HP fan motor FLA 1.6, Tank circulation pump 1/3 HP FLA 1.3, System pump 1/2 HP FLA 1.3
Ref 278/144 High/Low PSIG, Water Side 60 PSIG. |
| Machine ID: |
698 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
HVAC Equipment |
| Machine Type: |
Cooling Towers |
| Brand Name: |
EVAPCO |
| Short Description: |
EVAPCO 400 ton water cooling tower. |
| Asset Description Notes: |
Evapco water cooling tower, 400 ton unit.
"1997 Vintage tower." Galvanized base.
Model AT8-418B. No head tank or recirculation pump. Replaced due to expansion and required larger unit. |
| Machine ID: |
470 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
HVAC Equipment |
| Machine Type: |
Chillers, H2O & Air |
| Brand Name: |
Applied Process Equipment |
| Short Description: |
Applied Process Equipment 7 ton Chiller |
| Asset Description Notes: |
Applied Process Equiiopment chiller unit.
7 Ton unit.
Purchased for project and installed for 48 hours only, then diconnected.Has been in storage since.
|
|
