Greasymachines.com - Used Machinery and Equipment
Home | Logon Close Window
Search: Inspection - Test

Machine ID: 2957   Click here to see machine details
Category: Inspection - Test
Machine Type: Testers Misc
Brand Name: Cincinnati Test Systems
Short Description: Sentinel M24 decay leak tester
Asset Description Notes: Sentinel™ M24 is a versatile pressure decay leak test instrument that provides industry leading leak test performance. This Sentinel model features expanded capabilities that provide control for a single station or up to four independent stations. The M24 provides enhanced operator interface as well as broad and dynamic communications capabilities.
Advanced Product Features:
  1. Wall mount configuration 15.5” W x 12” H x 8” D
  2. Powerful 32-bit processor & 24 –bit A/D converter
  3. 256 x 125 VFD operator display with defined short cut keys
  4. Bar Graph display (pressure, loss, or flow) - English language only
  5. Multi-colored LED Pass/Fail/In-test test status indicators on each test channel
  6. Modular pneumatic and control packages
  7. Up to four concurrent test channels
  8. Standard pressure transducer, valve manifolds, and regulator ranges: -14.5, 2, 30, 100, 200, 500 (PSIG)
CLICK For further details

Machine ID: 2893   Click here to see machine details
Category: Inspection - Test
Machine Type: Testers Misc
Brand Name: Various
Short Description: Hydraulic Test Stand and Power Unit
Asset Description Notes:
Hydraulic Test Stand and Power Unit

Test hydraulic valves & equipment up to 100 GPM. Equipment is located in California. It is packaged as shown in the photos. Items can be personally inspected by arrangement, but are not under power. All items are sold as-is, where-is with no warranty..
General Purpose Hydraulic Test Stand for Valves, Cylinders, Motors
Tests servo and proportional valves on test manifold.
Separate circuit using quick-disconnects and hoses allows testing pumps, motors, cylinders, etc.
Manifold adaptors for various NFPA port patterns are included.
Test stand rated at 3000 PSI operating pressure.
Features:
• 3 micron Pall high pressure hydraulic filter on inlet
• Flow Technology 1-inch turbine flowmeter with range extender module in return path
• Front panel flow readout
• Pressure gages and pressure transducers for Inlet, C1, C2, Return
• Built-in sump pump

100 HP Tandem Hydraulic Power Unit

Hydraulic Power Unit and Pump-motor Unit described below, plus high pressure piping and interconnecting hoses as shown in photo.
Features:
• Power Unit 25 HP: Continental Polypac unit with reservoir, pump & GE motor.
Continental PVR3-45B10-RP-0-5-G vane pump, rated at 45 GPM @ 1000 PSI. Approximate dimensions (inches): L 54, W 28, H 57. ESTIMATED weight: 2000 lb.
• Pump-Motor 75 HP: Lincoln motor with Vickers PVB45-FRSF-20-C-11 piston pump, rated at 45 GPM at 3000 PSI. Approximate dimensions (inches): L 53, W 26, H 23. ESTIMATED weight: 1200 lb.
• Electrical starters and electrical disconnects are included
• Heat exchanger

Machine ID: 1961   Click here to see machine details
Category: Inspection - Test
Machine Type: Testers Misc
Brand Name: HODGE
Short Description: Hydro-Static Test Tank
Asset Description Notes: Hydro-Static Test Tank Manufactured by Hodge Boiler Works (1991)National Board #2667, MAWP 1100 (psi) and 250 (F) max. temp. Vertical tank, 22” inside diameter with a working depth of 49”, 106.75” high. J.M. Huber #500 hinged closure with jib hinge.

Machine ID: 1907   Click here to see machine details
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Jones & Lamson
Short Description: J & L TC-14 horizontal comparator with Quadra-Chek 200 DRO.
Asset Description Notes: Jones & Lamson 14" Epic horizontal optical comparator model TC-14. Bench top unit with factory base. 20X and 31.25X lenses with New Quadra-Chek® 200 system (programming manual included). RS-232 printer port. Direct, unreversed image. Projection and reflection modes. 5" x 16" stage, 125lb Table Capacity. L-R travel 4"; vert travel 2"; focus travel 1-3/8". Resolution .00005, 15° Table Helix. Full 360° chart rotation. 100-watt projection bulb. X-axis encoder must be replaced.

Machine ID: 1603   Click here to see machine details
Category: Inspection - Test
Machine Type: CMM, CNC
Brand Name: Mitutoyo
Short Description: Mitutoyo BHN-1020 CMM, Renishaw Probe PH9A.
Asset Description Notes: Mitutoyo BHN-1020 CMM, Renishaw Probe PH9A, TP6. Renishaw Probe Head Controller PHC 9, Mitutoyo CMMC-35 and twin joystick control for R, Z & X, Y measurements. Travels X: 40" x Y: 80" x Z: 40". Second Probe and Manual available. Granite condition is excellent. GEOmeasure Version 2.12 software(2005). Machine still used Daily, Calibrated. Inspections are welcome by appointment.

Machine ID: 1602   Click here to see machine details
Category: Inspection - Test
Machine Type: CMM, CNC
Brand Name: Numerex
Short Description: Numerex 4040-24,DCC CMM, Renishaw probe PH9A-TP6.
Asset Description Notes: Numerex 4040-24, DCC CMM, Renishaw Ruby probe PH9A-TP6. Probe Head control unit PHC9 MK2, PC with Zeiss U-Soft software, and PHD 9 probe head drive unit. X Travel: 40", Y Travel: 40", Z Travel: 24". Black Granite Table with Threaded Inserts. Clearance Under Bridge 26". Maximum Work Piece Size 46" x 52". Being used to Measure Aerospace parts.

Machine ID: 2760   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Micro Vu
Short Description: MICRO-VU Model H14F Floor Optical Comparator with Q16 control
Asset Description Notes:
  • Used MICRO-VU Model H14F Optical Comparator with Q16 control.
  • SPECIFICATIONS: Screen Size 14”
  • Stage 18” x 5”
  • Travel - Horizontal 8”
  • Vertical 6”
  • Focus 3”
  • Electrical 110 Volt
  • Weight 285 lbs.
  • EQUIPPED WITH: Q-16 Metrology Computer
  • (2) X & Y - 0.0001 Resolution Scales
  • Electronic Protractor
  • 10X & 20X Lens
  • Thru The Lens Surface Illumination.
  • Profile Illumination.

Machine ID: 2454   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Fatigue
Brand Name: Testing Machines, Inc.
Short Description: Texus® Flex Tester model 31-11
Asset Description Notes: Texus® Flex Tester model 31-11 manufactured by Testing Machines Inc., Amityville NY. Performs ASTM D3629 “Standard Test Method for Rubber Property-Cut Growth Resistance.”

Machine ID: 2345   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: CMM, CNC
Brand Name: Mitutoyo
Short Description: Mitutoyo BRT-504 Bridge Type CMM, CNC with Renishaw PH9 probe. S/N 0489605
Asset Description Notes: Mitutoyo BRT-504 CMM, CNC with Renishaw PH9 probe. Probe head is a Renishaw PH9 Mk2 has TP2 touch probe, ruby stylus and full Extension Kit also. Travels X 20" x Y 16" x Z 12". Has new Y axis encoder slide and membrane air dryer. Mitutoyo Joystick. IBM PC and software available, version Mitutoyo GEOMeasure 6000. Several ruby tips included, various sizes.

Machine ID: 2250   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Jones Lamson
Short Description: Jones & Lamson EPIC 230, 30" optical comparator with QuadraChek IIE DRO.
Asset Description Notes: Jones & Lamson EPIC 230 optical comparator with QuadraChek IIE DRO. 30" Screen, 15° Table Helix. Resolution .00005, 9" Vertical Travel. 12" Horizontal Travel. 250lb Table Capacity. 6 Position Lens Turret. Includes 5 objectives 10X, 20X, 31.25X, 50X, and 62.5X. Table 32" x 8.5".

Machine ID: 1901   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: CMM, CNC
Brand Name: Mitutoyo
Short Description: Mitutoyo BRT-504 Bridge Type CMM, CNC with Renishaw PH9 probe.
Asset Description Notes: Mitutoyo BRT-504 CMM, CNC with Renishaw PH9 probe. Probe head is a Renishaw PH9 Mk2 has TP2 touch probe and ruby stylus. 2 Ruby Probes and a full Extension Kit also. Travels X 20" x Y 16" x Z 12". Has new Y axis encoder slide and membrane air dryer. Mitutoyo Joystick. PC and software available,version Mitutoyo GEOMeasure 3000/4000/6000. Also I have a total of 3 ruby tips various sizes. Take advantage of this price, must sell quickly! Selling for twice as much elswhere.

Machine ID: 1850   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Optical
Brand Name: Brown & Sharpe
Short Description: 20 power lense for Brown & Sharpe 6500 series comparator.
Asset Description Notes:

Machine ID: 1591   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Brown & Sharpe
Short Description: Brown & Sharpe 14" Comparator, 6500 Series, Quadra Chek 200, year 2001.
Asset Description Notes: Brown & Sharpe 14" Comparator, 6500 Series. Metronics Quadra Chek 200 with Point, Line, Circle, Distance, Angle, Skew, and Magic features. Surface & Profile illumination. 10X objective, 4" X 8" travel with 4.5 X 19" work surface. Manuals. This model 599-6551, sells for $8750 NEW!

Machine ID: 1396   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Measuring
Brand Name: Brown & Sharpe
Short Description: Brown & Sharpe Pocket Surf III Profilometer
Asset Description Notes: Brown & Sharpe Pocket Surf III profilometer, (surface tester),measures Ra, Rmax/Ry, and Rz. Comes complete with case, general purpose probe, 9 volt alkaline battery, riser plate and certified specimen 125 u. Contact owner direct (603) 627-6811

Machine ID: 1384   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Optical
Brand Name: Nikon
Short Description: Nikon model 6C profile projector
Asset Description Notes: Nikon model 6C profile projector. 12" screen with angle vernier. Direct read vernier x and y scales. 20x and 50x magnification. Shadow, surface and combination modes. Brightness control. Service manual available. Call seller direct at (603) 682-9002 for further information.

Machine ID: 1321   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Mitutoyo
Short Description: Mitutoyo PJ 300 12" profile projector w/ 10x and 20x
Asset Description Notes: Mitutoyo PJ300-302-101-4 12" table model profile projector with 10x and 20x objectives. Protractor screen. Contour (2-stage) and surface illumination. Direct digital readout in X and Y spindles. Zero setting, ABS/INC and inch/mm mode selection Contact seller direct at (603) 627-6811

Machine ID: 1266   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Surface plates
Brand Name: Collins Microflat
Short Description: 24" x 18" x 4-1/2" granite surface plate
Asset Description Notes: Collins Microflat granite surface plate. 24 x 18 x 4-1/2. With stand.

Machine ID: 1265   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Surface plates
Brand Name: Starrett
Short Description: 24" x 24" x 6" granite surface plate
Asset Description Notes: Starrett pink granite surface plate 24" x 24" x 6" with stand.

Machine ID: 1264   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: CMM
Brand Name: OGP
Short Description: OGP View 1200 non contact inspection machine.
Asset Description Notes:

Machine ID: 1028   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Surface plates
Brand Name: Starrett
Short Description: Starrett Crystal Pink Lab Grade 48 x 72 Granite Surface Plate
Asset Description Notes: Starrett Crystal Pink Lab Grade 48" x 72" Granite Surface Plate. 15" thick! Serial # 4872-1. Resurfaced in 2005. Like New.

Machine ID: 934   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Scherr Tumico
Short Description: Scherr Tumico 2600 series digital comparator, 30" screen.
Asset Description Notes: Scherr Tumico 30" comparator, model 22-2601. 30" frosted glass screen w/ 30, 60, 90 degree lines. Curtain Canopy. Helix angle: +/_ 10 degrees by swinging lamphouse. 8" X 35" table, 500 lbs capacity, 9" vertical X 12" horizontal stage travel. 6 position Lens changer: 10X & 50X, lenses. Profile illumination and surface illumination. 2 axis joystick, Quadra-check 2000 DRO, Point, Line, Circle, Distance, Angle, and Skew capabilities.

Machine ID: 894   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Testers Misc
Brand Name: Wilson Rockwell Tester
Short Description: Wilson Rockwell Hardness Tester Model 3JR
Asset Description Notes: Wilson Hardness Tester. Model 3JR. * Unit includes 2 calibration test blocks. * Includes 1/16 steel ball indentor. Unit looks very good.

Machine ID: 718   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Scherr Tumico
Short Description: Scherr Tumico 2600 series digital comparator, 30" screen.
Asset Description Notes: Scherr Tumico 30" comparator, model 22-2601. 30" frosted glass screen w/ 30, 60, 90 degree lines. Curtain Canopy. Helix angle: +/_ 10 degrees by swinging lamphouse. 8" X 35" table, 500 lbs capacity, 9" vertical X 12" horizontal stage travel. 6 position Lens changer: 10X & 50X, lenses. Profile illumination and surface illumination. 2 axis joystick, Quadra-check 2000 DRO, Point, Line, Circle, Distance, Angle, and Skew capabilities.

Machine ID: 710   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Master View
Short Description: Master View Optical Comparator MV14-Q w PLC controller
Asset Description Notes: Master View Optical Comparator by Suburban Tool Co. Model MV14-Q * Quadra Check 200 Controller * 12 x 6 glass slides * PLC Controller with flat panel display * Mechanical radial scale for checking angles * 10x Lense * Reflective lighting Unit new 3/12/01 * Includes 2 drawer stand and manual.

Machine ID: 709   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Deltronic
Short Description: Deltronic DV114 Optical Comparator w MPC-5 Controller
Asset Description Notes: Deltronic DV114 Optical Comparator w MPC-5 Controller. Model DH214-MPC5. Unit has surface illumination - Reflective capability. * Digital radial gauge * Table has 30 Degree swivel capability * Unit includes 10x & 20x lense and possibly a 50X. * Unit includes a 2 drawer cabinet that comparator sits on. * Everything works on unit. * Includes a set up for edge finder

Machine ID: 688   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Micrometers
Brand Name: Starrett
Short Description: Starrett Digi-Chek height micrometer.
Asset Description Notes: Starrett Digi chek height micrometer, includes 10" Riser block. Gage block column in 1" increments and reads in .001 to 1" range. Good as new and well below 1/2 the new price!

Machine ID: 678   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Jones and Lanson
Short Description: Jones and Lamson, optical comparator.
Asset Description Notes: Jones & Lamson, Basic-14, 14" optical comparator w/ reflective capability. Decimetric II DRO,parts & service manuals, & 20X power. Up travel, Z is 2", Horizontal, X is 4". Works good. Bulb good. Screen is a Cross Hair design, no radius gauge.

Machine ID: 655   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Testers Misc
Brand Name: Varian Helium Leak Tester
Short Description: Varian Helium Leak tester, Model 938-41.
Asset Description Notes: Varian Helium Leak tester 10-9 leak detection capability. Unit includes calibrated tester. Model 938-41. Unit on wheels for mobil testing. Sensitivity: 1 x 10-9 std cc/sec (helium). Quickly converts to fast-response, quick-cleanup sniffing mode. Audio alarm can be set to start sounding at a particular leak rate. Output jacks for recorder (0-5V DC) and remote speaker. Dual-stage rotary-vane oil-sealed primary pump. High-reliability, fast-acting solenoid valves. Valve actuators and seats are user-replaceable. LED bar-graph display of leak rate.

Machine ID: 651   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Testers Misc
Brand Name: Chatillon
Short Description: Chatillon TCD200 Pull / Push force tester - 200lbs
Asset Description Notes: Chatillon TCD200 Pull / Push force tester Max pull / push force of 200lbs. Unit has DFS RND Force Gauge and a Load Cell. Tester new is $5500 for TCD unit and $1500 for Load Cell and Gauge. Bench top model.

Machine ID: 596   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Mitutoyo
Short Description: Mitutoyo P-3500 digital comparator
Asset Description Notes: Mitutoyo PH-3500 digital comparator. Has KS-32 DRO, extra bulbs, lenses, glass overlays. All manuals available. Mod 172-948-1A. Powers: 10x, 20x, 50x, table approx 17" x 6". Like new machine, great deal, was $12K new.

Machine ID: 450   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Testers Misc
Brand Name: Wilson Rockwell
Short Description: Wilson Rockwell hardness tester
Asset Description Notes: Wilson Rockwell hardness tester. Multiple test blocks included. Weights 15,45,100,150 Kg. Lubricating and Dash pot oil available. Model: 3TT BB, Tester No. 1476

Machine ID: 434   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Gages
Brand Name: Micron Co.
Short Description: Micron Co. pin gages.
Asset Description Notes: Micron Co. pin gages, 4 sets available. .061 to .750, M1, M2, M3,& M4. Buy all 4 sets or individual set for $29 each.

Machine ID: 339   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Jones&Lamson
Short Description: Optical Comparator TC-14
Asset Description Notes: Jones&Lamson, model TC-14. 20X to 31.25X power with Digital Read Out.

Machine ID: 332   Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine.
Category: Inspection - Test
Machine Type: Comparators
Brand Name: Jones and Lanson
Short Description: Optical Comparator
Asset Description Notes: Jones&Lanson, 14" optical comparator w/ reflective capability. 20X power and Digital read out.

Home | Logon Close Window

Security Privacy About Us Contact Us Asset Listings