| Machine ID: |
2291
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
SouthWestern Industries |
| Short Description: |
SouthWestern Industries ProtoTRAK TRL 1840V, CNC lathe, VL control. |
| Asset Description Notes: |
ProtoTRAK TRL1840V CNC lathe. 18.5" swing over bed; 9" over cross slide; 40.25" centers; 13" cross slide travel. 2.36" Spindle thru hole. Tail stock Quill travel 7-1/8", Quill diameter - 2.96", Quill taper hole - MT#5; 8" 3-jaw chuck. Coolant tank capacity - 13 gal. 10 HP, Hi-Lo Spindle speeds 80-2500 RPM. Steady Rest. New cost is $44K. |
| Machine ID: |
2277
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
OKUMA |
| Short Description: |
OKUMA LC20-1ST, CNC 2 axis lathe. (300 x 250) 15HP |
| Asset Description Notes: |
OKUMA LC20-1S, CNC 2 axis lathe. Swing 15.75", MAX turning dia. 11.81", Max Length 9.06", Max allowable weight 880 lbs. Splindle nose A2-6", Bore diameter 2.05", Internal Taper MT#6, Spindle Speed 65-3500 RPM. Turret 8 Position. Cross Slide Z 20.47", Cross Slide X 6.89", Rapids: X/Y- 200/400 IPM. Cutting Feed rate X/Y: 0.0001- 3.2000 IPR. Motor 15HP cont duty, 20HP 30 minute rating. Hydraulic unit 10.6 gallons, Coolant 23.8 gallons. Still turning parts daily and holding tolerances in an Aerospace environment.
|
| Machine ID: |
2276
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
Engine |
| Brand Name: |
Sharp |
| Short Description: |
Sharp 26120B Big Bore High Speed Engine Lathe. |
| Asset Description Notes: |
Sharp 26120B engine lathe. Swing over Bed 26",
Swing over Cross Slide 18", Swing over Gap 35".
Distance between Centers 120". Spindle Bore 4.5",
Spindle Nose Camlock D1-11. Number of Spindle Speeds 12, Spindle Speeds 10-1000 RPM, Spindle Bore Taper MT-7, Spindle Center Taper MT-5. Cross Slide Travel 13.75", Compound Rest Travel 6.20", Compound Width 6". Number of Longitudinal Feeds 18, Range of Longitudinal Feeds (in./rev.) 0.004 - 0.061, Number of Cross Feeds 17
Range of Cross Feeds (in./rev.) 0.002 - 0.036,
Number of lnch Threads 44, Range of Inch Threads (T.P.I.) 2 - 56. Number of Metric Threads 24,
Range of Metric Threads (mm) 0.5 - 14. Number of Modular Threads 24, Range of Modular Threads (M) 0.5 - 14. Number of Diametral Pitch 36, Range of Diametral Pitch (DP) 4 - 56. Leadscrew Size (in. x T.P.I.) 1.5 x 4, Tailstock Quill Diameter 3",
Tailstock Quill Taper MT-5, Tailstock Quill Travel 6.5". Main Motor 15 HP. 15" 4-Jaw Chuck and 16" 3-Jaw Chuck, 20" Face Plate. 4" - 12" Steady Rest with Brass Jaws and Follow Rest.
1-Way Rapid Traverse, 4-Way Tool Post, 4 Position Carriage Stops, Thread Dials, Center Sleeve, MT-5 Dead Centers, Halogen Work Light, Coolant System, Full Length Splash Guard. MT-5 Live Center, DRO TRAK 102. Machine is in excellent condition just a little dirty from use, we'll be cleaning it up soon. Under power. Machine cost over $40K new. |
| Machine ID: |
2273
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
Horiz , CNC |
| Brand Name: |
Fryer |
| Short Description: |
Fryer Easy Turn, ET-21 x 40 CNC Combination Lathe, like new. |
| Asset Description Notes: |
Fryer Easy Turn-21 CNC Combination Lathe. 15HP. 2 Speed Autoshift, Geared Headstock, 10-2000 RPM w/ Constant Surface Speed. Swing Over Bed: 21”.
Center Distance: 40”. Spindle Nose: D1-8 Camlock. Spindle Bore: 3.15”. 8 position bi-directional turret 10 inch 3 jaw hydraulic chuck, Fryer Touch 2000i Conversational Control also reads "G" code. Early power failure detection. Double nut ballscrews. Fluorescent work lamp, Automatic lube system w/ low lube fault, Manual tailstock, Rigid tapping. Has done very little work, small part time shop, machine is in like new condition, paint is not even chipped inside the enclosure. Only 157 hours, machine costs $70K new. |
| Machine ID: |
2267
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
VTL (Vertical Turret Lathe) |
| Brand Name: |
Bullard |
| Short Description: |
36" Bullard Spiral drive VTL |
| Asset Description Notes: |
36" Bullard spiral drive vertical turret lathe. 28" height under rail. 5-position turret; 4-position side head. 2 shaft bearings. Making parts. |
| Machine ID: |
2246
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Excel |
| Short Description: |
Excel SL 320/600 CNC lathe |
| Asset Description Notes: |
Excel SL 320/600 CNC lathe X and Y axis. We changed the turret head about 2 years ago. We renewed the old one, we give it with the machine. Chuck: 10". We used it in one shift. We use it at present, we just buy a new one, that's way we sell it. Dimensions metric
|
| Machine ID: |
2206
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
ProtoTRAK |
| Short Description: |
ProtoTRAK TRL1540SX CNC lathe, SLX control. |
| Asset Description Notes: |
Southwestern Industries CNC Turning Center. Model TRL1540SX. 15" Swing x 40" Center distance. 6-5/8" swing over cross slide. Headstock: 2.125" Spindle Bore. Turning Dia. Max 7.5". 10 HP spindle motor. Proto Trak SLX CNC System. RPM 150-4000. Manual Tail stock, 5.75" Quill travel. 12 gallon coolant and pump 1/8HP. 250 IPM rapid traverse. RS232 port, 3.5" floppy drive, tool post holder. 3 Jaw chuck. Less than 500 hrs of use. Like New. |
| Machine ID: |
2176
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma model LR-15 CNC lathe |
| Asset Description Notes: |
Okuma twin turret model LR-15 CNC lathe. Swing over bed 17.72";
Swing over saddle 11.81";
Swing over cross slides 9.84"; Maximum turning diameter 9.45";
Maximum turning length 9.84".
Rapid traverse rates:
X & U axes 472 IPM;
Z & W axes 591 IPM.
Hole through spindle 2.44";
Spindle nose A2-6.
Main motor 20 HP.
Upper turret 10 position;
Lower turret 8 position; some tooling included.
Approximate weight 11,800 lbs. This machine has spent its whole life cutting plastic and is in excellent working condition - don't pass it up. Conveyer is included. Have factory build sheet and all manuals.
|
| Machine ID: |
2168
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Hitachi Seiki |
| Short Description: |
Hitachi Seiki HT 20S III, Seicos L Multi, CNC lathe. |
| Asset Description Notes: |
Hitachi Seiki HT 20S III CNC lathe with Seicos L Multi control. Swing 18", Max turning Length 15". RS 232 port, 8" 3-jaw Chuck, Tool Pre-setter, 10-station Turret, Programmable Tailstock. Bar Capacity 2". Mayfran chip conveyor. Under 3000 cutting hours! |
| Machine ID: |
2155
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Hyundai |
| Short Description: |
Hyundai CNC Lathe Model HIT-8G |
| Asset Description Notes: |
Hyundai CNC Lathe Model HIT-8G. Lexair (Production Dynamics) Full Bore® FB8-20 collet chuck. Gang type tool table - 8 stations. Max cutting diameter 6.3"; max cutting length 6.3". X-axis travel 19.3"; Z-axis 12". Spindle bore 1.96"; spindle nose A2-5. Rapid traverse 945 ipm; cutting 196 ipm. 12" CRT; RS-232. Machine has worked in a Seal Manufacturing environment to make Lip seals and Axle seals. Has cut only plastics.
|
| Machine ID: |
2116
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
OKUMA |
| Short Description: |
Okuma LC40-2ST Simulturn, 4 axis, twin turret CNC lathe. |
| Asset Description Notes: |
Okuma LC40 Simulturn, 4 axis, twin turret CNC lathe. Swing 23", 15" 3-jaw Manual chuck and a Kitagawa(never used)15" Hydraulic chuck. 750mm Bed. 2.75" dia max bar feed. 12-position upper turret; 8-position lower turret. X-axis travel 20". Z-axis travel upper 21.65"; lower 20.28". Does not have a tailstock, but it has a center for the lower turret to act as a tailstock. Enough Square & Round shank holders and tools for both turrets plus extras. Includes chip conveyor, new actuator and drawtube. Ways are in excellent condition. Machine has to be seen to appreciate, original paint, it just has not been worked hard or often. |
| Machine ID: |
2091
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
Turret, CNC |
| Brand Name: |
Hardinge |
| Short Description: |
Hardinge CHNC II, CNC Chucker lathe. |
| Asset Description Notes: |
Hardinge CHNC II, CNC Chucker lathe. Swing Over Bed 14". Maximum Threading and Turning Diameter 8". Spindle Speeds 50 to 5000 RPM. 16C Collet Capacity 1-5/8". Hole Thru Spindle 1-7/8".
8 Position Turret: Square Tool Size 3/8", Round Tool DIA. UP TO 5/8", MAX X-axis Travel 4.5",
MAX Z-axis Travel 12". MAX X and Z axis Feedrate 200 IPM. MAX distance from Turret face to spindle 12.5". Indexing time (STATION 1 TO 8) 2 Seconds, Indexing time (STATION TO STATION) 1 Second. 5" Diameter Power Chuck. Chip conveyor. Lighting and coolant. |
| Machine ID: |
2089
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Mazak |
| Short Description: |
Mazak Quick Turn 28 CNC lathe |
| Asset Description Notes: |
Mazak Quick Turn 28 (model QT-28-U) CNC lathe 1989. 20" swing over bed, 12.8" max turn diam., 38" between centers, 3,500 rpm variable speed spindle, 2.5" spindle bore, 10" 3-jaw chuck, 12-position turret, tool pre-setter, 12" elevation chip conveyor. |
| Machine ID: |
2088
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma LNC-8C CNC lathe |
| Asset Description Notes: |
Okuma model LNC-8C Cadet CNC lathe 1995 est. With Smog Hog, Travels X-axis 7"; Z-axis 20". 15.75" swing, 9.84" max cut diam, 15" cut length; 2.2" spindle bore; 2" bar capacity; 12-position turret; 3,500 rpm; coolant thru tooling, collet chuck, tail stock, 14" elevated chip conveyor. RS-232 ports. (3) machines available. Price is each. |
| Machine ID: |
2087
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Tatung Okuma |
| Short Description: |
Tatung Okuma ES-L6 CNC lathe 2003 |
| Asset Description Notes: |
Tatung Okuma ES-L6 CNC lathe, 2003. Travels X-axis 6.1"; Z-axis 12.6"; Max Swing 21.65"; Max turn dia 8.27"; Max turn length 11.02". Spindle Bore 2.09". Rapid Traverse: X-787, Z-984. 12-position turret, Index time (1.1 sec). 6,000 rpm, flood coolant, 6" Hyd 3-jaw and collet chucks. Tail stock: M.T. No. 4, Dead Quill,Quill Dia 2.17", Quill stroke 3.15". 7.5 HP Cont, 15HP (10 min). Chip conveyor. |
| Machine ID: |
2055
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma Impact LU15, 4 axis cnc lathe, OSP 7000 control. |
| Asset Description Notes: |
Okuma Impact LU15, 4 axis cnc lathe, OSP 7000 control. Swing over bed 20.9" (530mm); Swing over carriage 15.0" (380mm); Swing over cross slide 13.0" (330mm); Center Distance 23.6" (600mm); Spindle dia. 3.94" (100mm); Spindle thru-hole 2.44" (62mm). Upper Turret 12 position, Lower Turret 8 position, Collet chuck, Programmable tailstock, flood coolant, and chip conveyor. Double palm button safety interlock installed. 4 machines available, price is each. These machines were dedicated to a specific part each, no job shop use. Under power for inspections on seller floor. |
| Machine ID: |
2041
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Demoor |
| Short Description: |
DEMOOR CNC Slant-Bed Oil Field Lathe with 10.23" Bore Hole |
| Asset Description Notes: |
DEMOOR model 750CNC Slant-Bed Oil Field Lathe with 10.23" bore hole. Swing Over Bed 30.70"; Swing Over Cross Slide 21.25"; Distance Between Centers 98.42". Spindle Bore 10.23";
Spindle Speeds 0-650 RPM;
Spindle Motor 60 HP/43 HP DC.
Cutting Feed Rate 236 IPM;
Rapid Traverse Rate 394 IPM.
EQUIPPED WITH:
Fagor 8055T CNC Control (Retrofit 2003);
25" Rohm Pneumatic Front & Rear Chucks, w/ 10.4" Bore;
4-Position Turret;
Steady Rest (19.685" Dia.);
Hydraulic Tailstock with Live Center;
Coolant. Price includes loading. |
| Machine ID: |
2034
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Dainichi |
| Short Description: |
Dainichi M95 flat bed CNC lathe |
| Asset Description Notes: |
Dainichi M95-200 flat bed CNC 8-station turret lathe with 32" face plate and 25" 3-jaw chuck. 34" swing over bed; 24" over cross slide; 98" between centers. Hydraulic tail stock - 7-1/2" advance. 4-1/4" bar capacity. Spindle speeds (2) 6-1,150 rpm. RS 232 port. Chip pan. Coolant system.
|
| Machine ID: |
2000
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Ikegai |
| Short Description: |
Ikegai AX40N, CNC slant bed lathe, 32" swing, Fanuc 6T. |
| Asset Description Notes: |
Ikegai AX40N, CNC slant bed lathe, 32" swing, 25" Hyd 3-Jaw Chuck, 3.94" Spindle bore, 80" Center Distance, 12 position turret, 10-800 RPM, Fanuc 6T. |
| Machine ID: |
1964
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
AMERICAN |
| Short Description: |
AMERICAN 4025 W CNC Lathe, 40 x 120", MDSI control. |
| Asset Description Notes: |
American 40" x 120" heavy duty universal CNC turning center model 4025W. Retrofit in 2000 with MDSI open CNC PC based control multiple part program storage, full program & edit at the control. Heavy duty flat bed, hardened & ground ways, 21" hydraulic chuck, 36" face plate, 4" bar cap, steady, follow, 6 position interchangeable programmable turret or 4 position tool post, large movable chip guard, flood coolant, chip conveyor, misc tooling. Manuals. 40" swing, 25" over carriage, 4.625" bore, 400 ipm rapid. 21” cross slide travel. New z-axis ball screw & nut installed. Heavy duty tail stock included. |
| Machine ID: |
1902
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
Engine |
| Brand Name: |
Enco |
| Short Description: |
Enco 405 GX 1000 engine lathe |
| Asset Description Notes: |
Enco model NCO405X1000 engine lathe. This 80s vintage machine was built before Enco made everything cheap. This machine is rock solid. 16" swing x 40" centers with 2" spindle bore. X-axis travel dial, coolant system, 8" 3-jaw chuck, steady and follow rests, metric and English threading, foot brake, gear head. Tool post shown NOT included. |
| Machine ID: |
1893
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
Turret, CNC |
| Brand Name: |
Mori Seiki |
| Short Description: |
Mori Seiki SL-1 CNC lathe |
| Asset Description Notes: |
Mori Seiki SL-1 CNC lathe. Swing over bed 16.5"; over carriage 6.2" Max turning dia 4"; max length 9-1/2". X-axis travel 3.3"; Y-axis 10.8". X-axis rapid 157 ipm; Y-axis 315 ipm. Tailstock - taper MT #3. 8-pos turret. Spindle bore 1.57; spindle nose A2-5. Yasnac 2000GII power supply. |
| Machine ID: |
1873
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
VTL (Vertical Turret Lathe) |
| Brand Name: |
Bullard |
| Short Description: |
36" Bullard spiral VTL |
| Asset Description Notes: |
36" Bullard spiral VTL with side head, 3-jaw chuck and Newall DRO. |
| Machine ID: |
1871
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
American |
| Short Description: |
American Panther Universal CNC lathe |
| Asset Description Notes: |
American Panther Universal Shaft and Chucking Lathe model 2208 with end and side turrets. 14 tool capacity. Max turning diameter 18" end turret; 8" side turret,
22" Swing Over Ways. 20" distance between ways. X-axis travel 56"; Y travel 17-1/2".
4- 5/8" Bar Capacity.
78" Between Centers. 0.1-400 ipm variable feed rate. TailStock.
30 Horsepower DC Drive
Full Computer Numerical Control
General Automation Adapt-A-Path |
| Machine ID: |
1859
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
VTL (Vertical Turret Lathe) |
| Brand Name: |
Giddings & Lewis |
| Short Description: |
Giddings & Lewis 52" Hypro VTL |
| Asset Description Notes: |
Giddings & Lewis 52" Hypro vertical turret lathe, High Column. Table diameter 52". Max swing approx 58". Height under rail approx 68". Main Motor 30 HP A.C. Swiveling ram, 5-position turret, side head, 52" oversized 4-jaw chuck, pendant control
*** EXTRA HEIGHT UNDER RAIL ** No Pit Required. Completely refurbished in 2008 |
| Machine ID: |
1829
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
VTL, CNC |
| Brand Name: |
Aeroturn |
| Short Description: |
Aeroturn VCL-4M VTL with live spindle |
| Asset Description Notes: |
Aeroturn VCL-4M vertical turret lathe, dual ram each with 20-tool ATC. Table diameter 157". Swing 161". Height under cross rail 39". Height of table 39". Z-axis travel 39". X-axis travel 156". Table rpm 2-86 variable. Live spindle 36-3,000 rpm. Spindle taper ISO-50 or BT-50 option. Feed rate 1-39 ipm variable. Rapid traverse 393 ipm. Delivery 8 months or less ARO. Warranty 12 months from installation or 15 months after delivery whichever is less. Pricing FOB east coast port of entry. |
| Machine ID: |
1827
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
Gap |
| Brand Name: |
Harrison |
| Short Description: |
Harrison M400 gap lathe |
| Asset Description Notes: |
Harrison model M400 gap lathe. Swing 16" X 60" (26" in gap). A1-8 Spindle Mount. Spindle Bore 2-5/8". 2 Axis Sony Magna Scale digital read out.
Aloris type tool post with holders. 12" 3 jaw H.D. Chuck needs spindle mount. 23" Face plate, Jacobs 5c collet nose, Steady Rest, Drill Chuck for tail stock, Coolant Pump and Tank, set up for Inch, Whitworth & Metric threads. Excellent Condition
Inspect under Power.
|
| Machine ID: |
1824
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Hitachi Seiki |
| Short Description: |
Hitachi Seiki Hitec-Turn 40G, CNC turning center. |
| Asset Description Notes: |
Hitachi Seiki Hitec-Turn 40G, Seiki Multi-L, Siecos Control, Collet Chuck and 15" 3-Jaw Chuck, Parts Catcher, 12 Position Turret and Chip Conveyor. Swing-40"(1000mm), Max Turning-24.4"(620mm), Max Dia Bar Capacity 4"(102mm), Distance Between Centers 43.39"(1100mm), 20-2000 RPM. Rapid Traverse X axis 590 IPM, Y axis 708 IPM. Cutting Feed Rate 19.69"(500mm) IPR. Manual Tailstock Spindle Diameter 4.33"(110mm), Tailstock Spindle Stroke 4.7"(120mm), MT5 Taper, Tail Stock Stroke 37.4"(950mm). All Manuals. Nice clean machine, regularly maintained in big company environment. Taken out of service 8/27/08. |
| Machine ID: |
1801
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
American |
| Short Description: |
American CNC lathe. 32" x 96", model 3220S. |
| Asset Description Notes: |
American CNC lathe. 32" x 96", model 3220S. Swing over bed 33.5", Swing over carriage 32", Swing over cross slide 21". Spindle Thru Hole 3". Spindle Speed 10-1500 RPM, Spindle Nose L-2, D1-8". Tailstock: Spindle Dia. 5", Spindle Length 30", Spindle Travel 12". Center Distance 96". Square and Hexagon Turret Tool Holders each 8" with 12 Index Points. Coolant pump. Well kept machine in daily use in extremely tight tolerance shop doing aerospace work. |
| Machine ID: |
1655
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Bridgeport-Romi |
| Short Description: |
Bridgeport-Romi PowerPath 15 CNC lathe |
| Asset Description Notes: |
BRIDGEPORT / ROMI Powerpath 15 CNC Turning Center New 1997 (used), 2 axis, 17" swing over way covers, 21" max length, 10" chuck, 2" bar capacity, x-axis travel 7-1/4", z-axis travel 21-1/4", tailstock, live center, 12 station turret, (36) 16C collets, misc tooling, manuals, 2 & 3 jaw chucks, 5 C adaptor, small bar pusher, good cond, under power. |
| Machine ID: |
1478
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
TG Industries |
| Short Description: |
Set of bar sleeves for Daewoo Puma 200LC |
| Asset Description Notes: |
1 set of (15) spindle liners for Daewoo Puma 200LC CNC lathe with storage cart. 3/4" - 1-7/8" bar accommodated |
| Machine ID: |
1214
Click here to see machine details |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Miyano |
| Short Description: |
Miyano BNC-34C, 2 Axis CNC lathe. |
| Asset Description Notes: |
Miyano BNC-34C, 2 Axis CNC lathe. Bar Capcity 1-5/16", MAX Machining Length
for bar work 7-7/8", center support work 9", Swing over turret face 10.62". MAX Slide Stroke X-Axis 4", Z-Axis 9-1/4". 6 position Turret, Max. Indexing Clearance 13". Tailstock, Parts catcher, Showa Lubrication, Coolant. Fanuc 3T control. Single Spindle 12 foot pusher stock tube. Main HP 7.4 |
| Machine ID: |
2203 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma Howa |
| Short Description: |
Okuma Howa NC-4PS, 2 axis CNC Lathe, 8" Chuck and Tail stock. |
| Asset Description Notes: |
Okuma Howa NC-4PS Lathe, 8" Chuck, 8 position Turret and Tail stock. 12" Turning diameter and 24" Center distance. Max Work Length 19.7", Hole Through Spindle: 2.28", Spindle Speed Range 35-3500 rpm. Travel X: 6.29", Travel Z: 20.07". Rapid Traverse Rate X: 196 IPM and Rapid Traverse Rate Z: 196 IPM. Must Sell Immediately! |
| Machine ID: |
2102 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
ProtoTRAK |
| Short Description: |
ProtoTRAK TRL1840SX CNC lathe |
| Asset Description Notes: |
ProtoTRAK TRL1840SX CNC lathe. 18.5" swing over bed; 9" over cross slide; 40.25" centers; 13" cross slide travel. 2.36" Spindle thru hole. Tail stock Quill travel - 7 1 /8",
Quill diameter - 2.96", Quill taper hole - MT#5; 8" 3-jaw chuck; collet chuck. Coolant tank capacity - 13 gal. Factory options: DXF converter; Advanced features; TRAKing option. Aloris tool post not included. |
| Machine ID: |
1986 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Hitachi-Seiki |
| Short Description: |
Hitachi-Seiki 4NE-600 CNC lathe |
| Asset Description Notes: |
Hitachi-Seiki 4NE-600 CNC lathe type A028-0047-B101 with Mayfran 8" chip conveyor. Includes tooling (see photos), Tail stock with (2) live centers, 6" 3-jaw chuck, (8) sets of jaws, (12) position turret. 1 owner machine |
| Machine ID: |
1814 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Cincinatti |
| Short Description: |
Cincinnati Milacron 18U x 80 Cinturn, CNC Universal Turning Center. |
| Asset Description Notes: |
Cincinnati Milacron 18 x 80 Cinturn Universal Turning Center. X-travel 18" Z-travel 80". 18" 3-Jaw Air Chuck, Steady Rest, Heavy Duty Tail Stock, Turret OD- 6 position and Turret ID- 6 position. Swing over cross slide 36". 80" Center Distance and Large 6.5" Thru Hole! Jorgensen Chip Conveyor. RS-232 Port on Acramatic 900 control. Coolant pump and pan, Pnuematic door closure, McClean Midwest Heat Exchanger, Ajax Transformers and Reliance 50HP motor. Recently taken out of service, replaced with 100" centers machine. This machine still maintains tight tolerances. Priced to go! |
| Machine ID: |
1796 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma Howa NC-4PS Lathe, 8" Chuck and Tail stock. |
| Asset Description Notes: |
Okuma Howa NC-4PS Lathe, 8" Chuck, 8 position Turret and Tail stock. 12" Turning diameter and 24" Center distance. Max Work Length 19.7", Hole Through Spindle: 2.28", Spindle Speed Range 35-3500 rpm. Travel X: 6.29", Travel Z: 20.07". Rapid Traverse Rate X: 196 IPM and Rapid Traverse Rate Z: 196 IPM. Seller bought $1000 in Tool holders recently(June) that go with the machine. Must Sell Immediately! |
| Machine ID: |
1768 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Fryer |
| Short Description: |
Fryer ET-18 Combination Toolroom Lathe |
| Asset Description Notes: |
Fryer ET-18 Combination Toolroom CNC 18x40 flat bed lathe features both manual & CNC operation, conversational or G code w/ auto teach. Includes TouchCAD Offline software. 2-speed head with auto shift and fully programmable spindle speed with constant surface feed. Spindle is a D1-6 camlock with spindle bore of 2.05. Includes 10" 3-jaw Buck type chuck, 4 post indexable Dorian Q1TP40 tool post, Jacobs drill chuck 1/32"-3/4", spindle stop. The control has a touch screen & 4.0 gig part storage memory, ac brushless drives and 400 ipm rapid. Control features 3D solid model verify. |
| Machine ID: |
1659 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Southwestern Industries |
| Short Description: |
SWI TRAK TRL 1440P CNC lathe LX2 control |
| Asset Description Notes: |
Southwestern Industries TRAK TRL 1440P with LX2 control. 14" swing over bed, 40" center max, 1-5/8" spindle thru hole, 18 spindle speeds from 35 to 2,400 rpm, D1-6 camlock spindle nose. Tailstock quill travel 5-1/2", quill diameter 1-7/8", quill taper MT-3. Quick change toolpost and chuck not included. Cross slide needs scraping and tightening. Documentation and manuals available. Seller can load on your truck.
|
| Machine ID: |
1654 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
Bench Top |
| Brand Name: |
Enco |
| Short Description: |
Enco 110-2034 Gap lathe, 12 x 36". |
| Asset Description Notes: |
Enco 110-2034 Gap Bench lathe with Cabinet, 12" Swing x 36" Center Distance. 110/220 Volt, Single Phase. 3-Jaw, 4-Jaw chucks, Steady Rest, Follow Rest, Compound, Cross slide 6", Tool Post holder, Tailstock Spindle Travel 3-5/8". Spindle through hole 1-7/16". Inch/Metric Threads Tool Box, extra gears, dead center, oil can, T handle wrenches(3), extra jaws(3). |
| Machine ID: |
1644 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma Howa |
| Short Description: |
Okuma Howa NC-4PS Lathe, 8" Chuck and Tail stock. |
| Asset Description Notes: |
Okuma Howa NC-4PS Lathe, 8" Chuck, 8 position Turret and Tail stock. 12" Turning diameter and 24" Center distance. Max Work Length 19.7", Hole Through Spindle: 2.28", Spindle Speed Range 35-3500 rpm. Travel X: 6.29", Travel Z: 20.07". Rapid Traverse Rate X: 196 IPM and Rapid Traverse Rate Z: 196 IPM. Must Sell Immediately! Taking offers! |
| Machine ID: |
1640 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Miyano |
| Short Description: |
Miyano GN-4W, 2 axis, twin CNC lathe. |
| Asset Description Notes: |
Miyano GN-4W, twin horizontal CNC lathe. 2 separate work stations, each with own Fanuc O-T control. Turning Capacity: Max Diameter w/Air Chuck(4 inch) 3-5/32", w/Collet Chuck 1". Head Stock and Spindle: Spindle End Diameter 3.937", Hole Thru Spindle 1.024", Bore of Closing Tube .606". Spindle Speed: Drive Motor(infinitely variable)3/5HP. Speed Change Rate variable, Speed 200-4000 RPM. Slide: Dovetail guideway, X axis 10", Z axis 10". Rapids X: 236 IPM, Z: 315 IPM. Tool Shank Size 10 and 13mm square. Coolant System: High Pressure Coolant, 18.5 Gallon Tank, Pump Motor 1/4 HP. Air Pressure 12-100 PSI. Manuals available. Well maintained in a Aircraft Mfg environment, currently powered for 480V. Make Offers! |
| Machine ID: |
1630 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
Precision |
| Brand Name: |
Hardinge |
| Short Description: |
Hardinge DSM-59 second op. precision lathe |
| Asset Description Notes: |
Hardinge DSM-59 second operation precision lathe COMPLETE REBUILD less than 400 hours ago. 9" swing, 17" centers. Spindle capacity 1-1/16" with round 5C collet, 1-5/16" with chuck. Refurbished
- New Spindle bearings were installed in headstock, then spindle-nose was re-ground "true".
- Cross slide and Turret were re-ground and refurbished.
- Turret tool holes were bored from 5/8” to ¾” Shank Dia. to accommodate a broader selection of standard tooling options. This modification allowed our tooling arsenal to be shared with other lathes and mills, such as Boring heads, ER collet holders, Tapping heads, Drill chucks, as well as standard ¾” shank turret lathe tooling. Hardinge 5/8” shank tooling may still be used, by using a split bushing to gain size.
- An “Overhead Cutter Slide” was added to accommodate standard “Cut-Off” blades for maximum rigidity and productivity. Form tools may also be mounted here.
- R+L tool post adaptor base plates (2) were designed and fabricated to mount a standard “Quick Change” DTM Tool Post at either end of the Cross slide. Much better than the old “Hardinge Design”, it allows more versatility, quicker set-ups, and tool re-sharpening, without incurring the usual time for resetting the tooling.
- An air-operated collet closer was added, and it has a foot switch included.
- Coolant system has a solenoid valve added for instant shut-off - making for easy part removal.
- Splashboard is fixed to back, to keep chips and coolant in the tray.
- Operators Manual / Parts list, plus equipment file folder.
.............................................................................................................................................
Various tooling is available for purchase, but is not included with price of this machine:
DTM tool post and tool holder set (sliding gibbs, not piston type)
Skiving Tool set, holds diameters within two tenths (.0002”)
Self-opening threading die chasers (4)
Misc:
Turret turning tools, vee and roller types
Knurling tools, micro (Bump type)
Turning heads for turret
R+L Tapping head. |
| Machine ID: |
1585 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Daewoo |
| Short Description: |
Daewoo Puma 230C, Slant Bed CNC lathe. |
| Asset Description Notes: |
Daewoo Puma 230C, Slant Bed CNC lathe. Programmable Tail Stock and Tool Presetter. Swing Over Bed 21", Swing Over Saddle
13", Max. Turning Diameter 13.8", Max. Turning Length 21.1".
TRAVEL
X-Axis Travel 9.5" (2.4+5.7), Z-Axis Travel
22.8".
Spindle Speed 3,500 rpm, Spindle Bore 3.03", Bar Capacity 2.76". Spindle Bearing inner diameter 5.1".
TURRET 10 position. OD Tool Size 1.0"
Boring Bar Diameter 1.5"
Indexing Time 0.15 sec
FEEDRATE
Rapid Traverse X: 945 ipm, Z: 1200 ipm.
Cutting Feedrates X, Z 20 in./rev.
TAILSTOCK
Quill Diameter 3", Quill Travel 3.15". Kitagawa 10" Chuck and Tool Holders. No Chip Conveyor. 17,500 Power On hours, 10,000 Run hours. 1 owner machine. |
| Machine ID: |
1555 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Miyano |
| Short Description: |
Miyano JNC-35, 2 Axis CNC lathe. |
| Asset Description Notes: |
Miyano JNC 35 2-axis CNC lathe. 10" swing. Bar Capacity, Round 1.38", MAX. Turning Length 15.56", Single stock tube, Spindle Speeds 50 TO 6,000 RPM, Main HP 7.5, Spindle Nose A2-5, FANUC 3T CNC Control, 8 Position Turret, Tail Stock, Coolant, Programmable Tailstock, RS232 SERIAL PORT, Advance/Return Foot Pedals and Chip Conveyor. |
| Machine ID: |
1217 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
Speed |
| Brand Name: |
Hardinge |
| Short Description: |
Hardinge HSL-59 Speed Head lathe. |
| Asset Description Notes: |
Hardinge HSL-59 Speed Head lathe * secondary lathe for production. * Polishing Speed Head * 3 speeds from 750-3000 rpm. * 2 Units available -you pick. * 1 unit has compound for cutting & the other has Secondary table. Both have 5C collect holder. *2nd machine S/N HSL-5C-4285T |
| Machine ID: |
1169 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
Engine |
| Brand Name: |
Colchester |
| Short Description: |
Colchester, 13 x 36" Engine Lathe |
| Asset Description Notes: |
Colchester Engine Lathe that is in excellent condition. Fully function and ready to put into service. 13" swing x 36" bed; Spindle thru-hole 1-5/8". Model: 13 x 36; Serial: 28599 B H. 3-jaw and 4-jaw chucks included |
| Machine ID: |
1147 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
Engine |
| Brand Name: |
South Bend |
| Short Description: |
South Bend Model A, 16" engine lathe. |
| Asset Description Notes: |
South Bend 16"(swing)lathe, 52" bed length, 33" center distance. 3 Jaw chuck with spare jaw teeth. Threads/Feeds, Jacobs drill chuck, tail stock, compound stock & steady rest. Nice daily use machine. |
| Machine ID: |
1014 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
Gap |
| Brand Name: |
Sharp |
| Short Description: |
Sharp Gap Bed Lathe model 1640C w Dorian Tool System and Tooling. S/N 8807103 |
| Asset Description Notes: |
Sharp Gap Bed Lathe Model 1640C. 16" Swing x 40" Center distance. 16 Spindle speeds: 20 - 2000 RPM Speed control. Swing over Cross Slide 8.75", Swing over Gap 24.375". Spindle Bore 2.0625". Metric & Inch dials and threading. Steady Rest, Follow Rest, Dorian Tool Post System. 10 holders - boring bars, cut off, knurler, tool bits. Foot Brake, Travel Dial, Indicator for position location. 3 Jaw Bison & 4 Jaw Bison Chucks and Face Plate. Tailstock travel 4.75". Jacobs Drill Chuck, Live Center and more. 220/440V 3 Phase, currently wired for 240 Volts. Lots of tooling - dozens of carbide inserts, bits and drills. Must See Lathe! |
| Machine ID: |
486 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
Horizontal Engine Lathe |
| Brand Name: |
South Bend |
| Short Description: |
South Bend Lathe |
| Asset Description Notes: |
South Bend lathe, 5' bed & 13" swing.
3 jaw chuck, drill chuck, 5C Draw w/Nose piece.
Live center & carriage stop. Other tooling available. 3 units available. |
| Machine ID: |
262 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Lathes |
| Machine Type: |
Precision |
| Brand Name: |
Clausing |
| Short Description: |
Clausing 5900 series |
| Asset Description Notes: |
13" Clausing tool room lathe w/ 48 bed. Lathe has been loved and maintained by owner since purchased. Lathe is tight and comes loaded with extras - quick release Draw Bar, 3 jaw, 4 jaw, live center, drill chuck, nose pieces for attachments, 5C set of collets, set of 2"-1" collets, Phase 2 quick change tool post system, bits and more. The whole kit and kabootle.
|
|
