| Machine ID: |
2290
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma MX 45 VAE, vertical machining center, OSP 700M, year 2000. |
| Asset Description Notes: |
Okuma MX45 VAE CNC vertical machining center. Travels: X-axis 30"; Y-axis 18.1"; Z-axis 17.8". Rapid traverse X & Y 1181 IPM; Z 944 IPM. Spindle to table top 6"- 24". 20-tool ATC. CAT 40 spindle taper. 7.5/10 HP, 50-7000 RPM. Okuma OSP 700M control. Coolant pan and Halogen cabinet light. Must ASAP! Make your offer.
|
| Machine ID: |
2289
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Knee, CNC |
| Brand Name: |
SouthWestern Industries |
| Short Description: |
SouthWestern Industries ProtoTRAK K3EMX, CNC Kneemill, EMX control. |
| Asset Description Notes: |
Southwestern Industries ProtoTRAK K3, CNC knee mill, TRAK EMX DRO. 2 Axis machine, 3 axis DRO. Power draw bar, Knee power feed, Remote Stop/Go Switch . 50" x 10" table; travel X-axis 32"; Y-axis 16". R8 spindle taper. T-Slots - 5/8" x 3 x 2.5". Knee Travel - 16", Ram Travel - 15",Maximum Quill Travel - 5", Quill Diameter - 3- 3/8". Spindle Speed Vari-speed head - 60-4200 RPM. |
| Machine ID: |
2287
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Haas |
| Short Description: |
Haas VF-3, 1997, 4th axis ready, vector drive |
| Asset Description Notes: |
Haas VF-3, 1997, 4th axis ready, vector drive. Travel X-axis 40";
Y-axis 20";
Z-axis 25".
Spindle motor 15 HP.
Spindle speeds variable to 7500 RPM.
Spindle taper CAT 40.
20 position ATC.
Equipped with:
Gear box;
Prog. coolant;
Chip auger;
4TH axis ready, brushless (drive board present);
Quick code;
Floppy drive;
1 MB memory;
Vector drive;
Rigid tapping.
** IN PLANT, UNDER POWER. AVAILABLE IMMEDIATELY. |
| Machine ID: |
2280
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Horiz , CNC |
| Brand Name: |
OKK |
| Short Description: |
OKK MCH-800 4-axis horizontal machining center |
| Asset Description Notes: |
OKK MCH800 4-axis horizontal machining center. Characteristics:
Load Capacity: 4400 lbs;
CNC Control: TNC 320 Heidenhain;
Cutting Area: 84"x43"x40" with B-axis accuracy ±1°.
Pallet Size: 39-3/8"x39-3/8";
Number of Tools in a Magazine: 36;
Tool Change Time: 3.5 Seconds;
Spindle AC Motor: 22Hp;
AC Motors: Siemens (4);
Spindle Taper: 50;
Spindle Speed: 30-3700RPM;
Spindle Diameter in Bearing: 5";Complete splash guard enclosure included.
PRICE: $138,000.00 (CDN) including the Pallet Changer Station. Without the Pallet Changer Station the price is $110,000.00 (CDN). $US for reference only...........The MCH Series Just like the MCV Series of vertical machining centers, every one of our horizontal machining centers is built for heavy-duty performance with the precision, reliability and expandability which have made OKK famous -- and can make you more productive.........
Powerful The high-power AC spindle motor and two and three-speed gear systems means the spindle has all the torque it needs for any given material or type of cut -- a big plus when cutting at low RPM............
Accurate And to handle this power, the MCH machines feature a rigid design incorporating full thermal symmetry in the column and head, and an oil cooling system (optional) for the spindle head to further minimize heat displacement. |
| Machine ID: |
2275
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
ProtoTRAK |
| Short Description: |
SouthWestern Industries ProtoTRAK DPM V7, CNC Bed Mill, 7.5HP, 3 axis. |
| Asset Description Notes: |
ProtoTRAK DPM V7 miller with ProtoTRAK VM. Table size - 76" x 14"
T-slots (number x width x pitch) - 4 x .63" x 2.5". Travel (X, Y, Z axis) - 60" x 23" x 20.5"
Quill diameter - 5.06", Spindle taper - NMTB 40, Spindle speed range RPM - 200-5000.
Spindle center to column face - 23".
Spindle motor power - 7.5 HP.
Power requirement, control - 110V, 1P, 15A
Power requirement, machine - 220V, 3P, 60HZ. Current, Full Load Amps - 37.5 FLA
Maximum weight of workpiece - 2200 lbs.
Height of table from bottom of bed - 38.25"
Maximum spindle nose to table - 21.5"
Way surface - dovetail X axis; square ways Y and Z axis. MUST GO ASAP! Make Offers!
|
| Machine ID: |
2274
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Fryer |
| Short Description: |
Fryer MC-10 CNC vertical machining center, 2006, 15HP, 8000 RPM. |
| Asset Description Notes: |
Fryer MC-10 CNC Vertical Machining Center. Travels: 32" x 17" x 19". Table Size: 50” x 14” - 800 IPM Rapids. Anilam Touch 6000 control. 15HP, 40 Taper, Spindle 8,000 RPM. 16 Station Carousel ATC. Box way construction, Double nut ballscrews. Automatic lube system w/ low lube fault. Air blast hose. 50 gallon coolant tank, fluorescent work lamps. Choice of simple Conversational menu programming (no codes required) or standard G Code programming. This has less than 500 hours on it, it is in excellent condition. Come inspect it under power on the seller's floor. |
| Machine ID: |
2270
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vertical |
| Brand Name: |
Mitsubishi |
| Short Description: |
Mitsubishi M-V5B Vertical Machining Center |
| Asset Description Notes: |
MITSUBISHI, M-V5B, CNC VERTICAL MACHINING CENTER
Year: 1996
Specifications:
X AXIS TRAVEL 31.5"
Y AXIS TRAVEL 20.1"
Z AXIS TRAVEL 18.1"
TABLE SIZE 20.1" x 39.4"
MAX TABLE LOAD 1,100 LBS
MOTOR 10 HP
SPINDLE TAPER CAT 40
SPINDLE SPEED 80-8,000 RPM
ATC 18
ATC CHANGE TIME 1.5 SECONDS
MAX FEEDRATE 393 IPM
RAPID TRAVERSE (X, Y) 1181 IPM
RAPID TRAVERSE (Z) 787 IPM
Equipped With:
- MELDAS 500 CONTROL
- AC COOLED SPINDLE |
| Machine ID: |
2257
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Bed Type CNC |
| Brand Name: |
FRYER |
| Short Description: |
MB-11Q COMBINATION CNC BEDMILL w/ ANILAM 3000 |
| Asset Description Notes: |
FRYER MB-11Q COMBINATION BEDMILL WITH ANILAM 3000 CONVERSATIONAL CONTROL. EQUIPPED WITH THE FOLLOWING OPTIONS: STEEL WAY COVERS,FLOOD COOLANT SYSTEM, KURT POWERLOCK DRAWBAR,QUILL GLASS SCALE FEEDBACK TO CONTROL. MANUAL QUILL WITH 6 INCH TRAVEL, X TRAVEL 30", Y AXIS TRAVEL 20",Z AXIS TRAVEL 21". CAT 40 SPINDLE WITH BACK GEAR. MACHINE IS USED DAILY AND CAN BE SEEN UNDER POWER. |
| Machine ID: |
2255
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Thread |
| Brand Name: |
Brother TC-324N |
| Short Description: |
Brother TC-324N CNC Tapping Center |
| Asset Description Notes: |
X-Axis Travel 16.5";
Y-Axis Travel 12.6";
Z-Axis Travel 10.2".
Chip to Chip change time 2.3 seconds.
Tool CHANGE Positions - 10 Station ATC.
Rapid Traverse Rates 1181 IPM.
Spindle Motor 6 HP.
Spindle Speeds 10 - 10,000 RPM.
Spindle Taper - # 30 Taper.
Table Dimensons 33.1" x 19.7";
Table Top to Spindle Nose 7.5" - 17.7".
Tool to Tool change time 1.2 seconds.
Work Table Area/Number of Pallets - 19.7" x 11.8"/2 plts.
EQUIPPED WITH:
BROTHER CNC CONTROL |
| Machine ID: |
2254
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Thread |
| Brand Name: |
Brother TC-324N |
| Short Description: |
Brother TC-324N CNC Tapping Center |
| Asset Description Notes: |
X-Axis Travel 16.5";
Y-Axis Travel 12.6";
Z-Axis Travel 10.2".
Chip to Chip change time 2.3 seconds.
Tool CHANGE Positions - 10 Station ATC.
Rapid Traverse Rates 1181 IPM.
Spindle Motor 6 HP.
Spindle Speeds 10 - 10,000 RPM.
Spindle Taper - # 30 Taper.
Table Dimensons 33.1" x 19.7";
Table Top to Spindle Nose 7.5" - 17.7".
Tool to Tool change time 1.2 seconds.
Work Table Area/Number of Pallets - 19.7" x 11.8"/2 plts.
EQUIPPED WITH:
BROTHER CNC CONTROL |
| Machine ID: |
2252
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vertical |
| Brand Name: |
OKK |
| Short Description: |
OKK MH-4V vertical bed mill, 50 taper, RPM 1400. |
| Asset Description Notes: |
OKK MH-4V vertical miller, 50 taper, Max RPM 1400, Travels: X48", Y16", Z16". Table 18" x 79". Ymas auto lube. Coolant, Work Lamp, Digital readout. 20HP |
| Machine ID: |
2243
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Horiz , CNC |
| Brand Name: |
OKK |
| Short Description: |
OKK MCH-560 horiz. machining center w/dual pallets |
| Asset Description Notes: |
OKK MCH-560 horiz. machining center w/dual 23" pallets. Travels 28" X-axis, 22" Y and Z, 360° x 1° indexable 4th axis. 36-position ATC, CAT 50 spindle, 2-speed, Nippon Conveyor C-200A chip system, 1-piece cast frame. Can be disassembled to ship with no height or width permits. Full lube system, coolant, all manuals. L-bracket on turntable NOT included. Being sold due to need for a larger machine. |
| Machine ID: |
2241
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Bridgeport |
| Short Description: |
Bridgeport Series I with Boss 6 |
| Asset Description Notes: |
Bridgeport Series I 3-axis CNC miller with digital and mechanical readouts. BOSS 6 control. Table travel 30" x 12". Quill 5". Manual knee travel 16". Includes vise, 12 collets and 15 holders. Bijur lube. Documentation available. |
| Machine ID: |
2187
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Kitamura |
| Short Description: |
Kitamura Mycenter 2Xi CNC Mill |
| Asset Description Notes: |
Kitamura Mycenter 2Xi CNC Mill. Fanuc 16i MA Control.
Pallet Size 14" x 22";
Max. Pallet Load 200 lbs.
X-Axis Travel 20";
Y-Axis Travel 14";
Z-Axis Travel 18";
Spindle Speeds 15,000 RPM;
Spindle Taper CT 40.
Main Motor 15 / 10 HP
Tool Changer Positions 24 ATC
Rapid Traverse Rate (X & Y Axis) 1969 IPM
Rapid Traverse Rate (Z Axis) 1417 IPM
Tool Change Time 1.7 seconds
Dimensions 175" x 98" x 110"
Weight 12,000 lbs.
This machine is redone new paint and plexiglass also has a pallet changer and conveyer |
| Machine ID: |
2186
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Southwestern Industries |
| Short Description: |
1999 ProtoTRAK DPM with AGE3 vertical mills |
| Asset Description Notes: |
Southwestern Industries 1999 ProtoTRAK DPM vertical milling machine with A.G.E. III conversational control.
TABLE SIZE 50" X 10".
MAX WEIGHT OF WORKPIECE 1,320 lbs.
X AXIS TRAVELS 31",
Y AXIS TRAVELS 17",
Z AXIS TRAVELS 23.5",
QUILL TRAVELS 5".
TAPER. # 40,
SPINDLE SPEED 4200 rpm, SPINDLE MOTOR 3 HP.
RAPID TRAVERSE 100 ipm X & Y, 150 ipm Z.
COOLANT SYSTEM IN BASE.
Both have power draw bar. One with glass scales.
DIMENSIONS 71" L-R X 66" F-B X 85" H, APPROX
4100 LBS.
(2) machines available. Price is each. |
| Machine ID: |
2167
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Hitachi Seiki |
| Short Description: |
Hitachi Seiki VK55 II, Seicos 10M control, 4 axis vertical machining center |
| Asset Description Notes: |
Hitachi Seiki VK55 II, Seicos 10M control, 4 axis vertical machining center. Travels X-40" x Y-22" x Z-22", ATC 30, 15HP, 50 Taper, Table 55" x 22", Chiller. Kurt Vise and LMC 4th axis include. Touch probe, tools go with machine. Coolant pump and pan, chip pan. Hardly been used machine, less than 800 hours! |
| Machine ID: |
2152
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Horiz , CNC |
| Brand Name: |
Hitachi Seiki |
| Short Description: |
Hitachi Seiki HS500 horizontal machining center. |
| Asset Description Notes: |
Hitachi Seiki HS500 horizontal machining center. SEICOS 10L control. 120 ATC, CAT 40, 25HP, Daikin chiller, Mayfran ConSep 200 chip conveyor. (2) Pallets: 19.68" x 19.68", Table Load 2200lbs, Table Index 1 DEG. Travels X-26.8", Y-26.8", Z-26.8". Rapid Traverse 1772 IPM. Cutting Rate 787 IPM. 12,000 RPM. Chip Blaster High Pressure Flood Coolant, Tool Setter, Renishaw Probe System. Can run lights out, has sensing for tool life, if tool is worn the machine will select a duplicate tool from ATC and continue with the job. Parameter Software and Manuals available. |
| Machine ID: |
2130
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Milltronics |
| Short Description: |
Milltronics Partner 10 CNC router |
| Asset Description Notes: |
Milltronics Partner 10 CNC router 24" x 110" table. X-axis table travel 100"; Y-axis cross saddle travel 30"; Z-axis vertical head travel 24". Feed rate 1-100 ipm. Rapid X and Y 700 ipm; Z rapid 500 ipm. Spindle taper #40 12-position auto tool changer. Variable speed range 0-10,000 rpm. Coolant system. Auto lube, various tool holders. |
| Machine ID: |
2129
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Horiz, Prod. |
| Brand Name: |
Hitachi Seiki |
| Short Description: |
Hitachi Seiki 3ML-P horizontal miller |
| Asset Description Notes: |
Hitachi Seiki 3ML-P horizontal production milling machine with 14"(350mm)x 60"(1500mm)T-slotted table, 1500 rpm, #50 taper spindle, 19HP (14kW), coolant system. |
| Machine ID: |
2112
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Horiz, Prod. |
| Brand Name: |
Cincinnati |
| Short Description: |
Cincinnati #3 315-15 horizontal mill |
| Asset Description Notes: |
Cincinnati #3 315-15 horizontal mill.
Spindle Taper: #50MMT.
Table Size: 15-1/4" X 69" (390 x 1,750mm) with 3 T-SLOTS;
Longitudinal Travel: 29-1/2" (750mm);
Cross Travel: 15" (380mm);
Vertical Travel: 18" (460mm);
Spindle Speeds: 18~1800 RPM;
Feeds: 3/8~60 IPM (9-1500 mm/min);
Main Motor: 15HP (11 kW).
|
| Machine ID: |
2092
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma MC-4VA, CNC machining center. HAAS 4th axis indexer. |
| Asset Description Notes: |
Okuma MC-4VA, CNC machining center. HAAS 4th axis indexer. X-Axis 25.59", Y-Axis 16.14", Z-Axis 17.72". TABLE 39.37 x 16.14". Table Capacity 1100 lbs. Spindle Taper NT 40. Spindle nose to table 7.87" -25.99". Spindle Speed 40-4,000 RPM. Spindle Motor 10 HP / 7.5 HP. Cutting Feed 276 IPM MAX. Rapid Traverse X-Axis 490 IPM, Y, Z Axis 387 IPM. ATC 20. MAX Tool DIA 4.5", MAX Length 15". KURT vise. Chip Pan and Coolant Pump. Spider Cool. |
| Machine ID: |
2090
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma MC40VB, vertical machining center. |
| Asset Description Notes: |
Okuma MC40VB 3-axis vertical milling machine. Travels X-30" x Y-16" x Z-17". Table Size 39.37" x 16.93". Table Load Capcity 1100 lbs. Spindle End to Table Surface 7.87" - 25.59". Spindle Center to Column Front Surface...18.11". Taper of Spindle Hole NT50. Spindle Speed 10 - 5000 RPM. Rapid Traverse Rates: X & Y Axis 788 IPM, Z Axis 591 IPM. Cutting Feed Rate( X, Y & Z )394 IPM. Tool Magazine Capacity 32. Tool Shank - MAS BT 50. Maximum Tool Diameter 4.33", with Adjacent Pockets Empty 5.98". Maximum Tool Length 13.77", Max. Tool Weight 33 lbs. Spindle Motor(Cont./30 Min.)7.5/10 HP.
|
| Machine ID: |
2037
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Bridgeport Textron |
| Short Description: |
Bridgeport Series I CNC miller |
| Asset Description Notes: |
Bridgeport Series I 3-axis CNC miller with digital and mechanical readouts. BOSS 6 control. Table travel 30" x 12". Quill 5". Manual knee travel 16". Bijur lube. Documentation available. |
| Machine ID: |
2030
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vertical |
| Brand Name: |
Cincinnati |
| Short Description: |
Cincinnati 28-120 Hydro-Tel vertical mill |
| Asset Description Notes: |
Cincinnati 28" x 120" Hydro-Tel vertical mill. Vertical head power feed 0.125-2.00 ipm. 4-position turret stop, 8" spindle extension, power hydraulic clamps for table and cross slide, circular scale and pointer for cross slide, rear control handwheel for manual cross slide movement, Metra-Tech measuring system for table and cross slide, collet chuck. Dual auto feed cycle for both table and cross slide - automatic dog controlled cutting stroke with auto pickfeed to table or cross slide at each reversal of corresponding unit. Pickfeed selection .010"-1.00" in .010" increments. |
| Machine ID: |
2026
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Matsuura |
| Short Description: |
Matsuura MC-600V Vert Mach Center |
| Asset Description Notes: |
Matsuura MC-600V CNC vertical machining center. Travel 23.6"(X) x 16.1"(Y) x 18.5"(Z). Rapid traverse X&Y 590 ipm; Z 472 ipm. Table to spindle 6"-24". Spindle BT-40. 20-pos ATC. ATC tool-to-tool 2 seconds. Tools 3.15" diameter x 11.8" long. 17.6 lbs max tool weight. Cutting feed rates 0.1-196 ipm. RS 232 port, full enclosure. |
| Machine ID: |
2023
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Hitachi Seiki |
| Short Description: |
Hitachi Seiki VA-40, CNC vertical machining center, Fanuc 6M, 4th axis rotary table. |
| Asset Description Notes: |
Hitachi Seiki VA-40, Fanuc 6M control. Table 18 x 50", Travels X: 28" x Y: 16" x Z: 18". Motor 7.5 HP, 28- 4000 RPM, ATC 25, Cat 40 tools, Hi/Low gear. Table load capacity: ll00 llbs. Available 4th axis 12" Tsudokoma rotary table. Machine can be sold with the 4th axis rotary table for less. |
| Machine ID: |
2021
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Bridgeport |
| Short Description: |
Bridgeport Series I EZ-Trak 3-axis Vertical Mill |
| Asset Description Notes: |
Bridgeport Series I EZ-Trak 3-axis CNC Vertical Mill Specifications: Table Travel(X) 30"; Saddle Travel (Y) 12"; Quill Travel (Z) 5"; Knee Travel (Z) 16". 9" X 48" Table with Chrome Ways. 3 HP Variable Speed Head. R-8 Taper Spindle. Automatic Lubrication. Kurt Power Drawbar. DX-32 3 Axis Control with 3 Axis Digital Readout in Manual Mode. Precision Ground Ballscrews. Remote Stop/Go Switch. RS 232 Port & Floppy Drive. Condition: Like New. This a one owner machine that was used to cut plastic and maybe some aluminum. Same owner as asset #2020 |
| Machine ID: |
2020
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Bridgeport |
| Short Description: |
Bridgeport Series I EZ-Trak 2-axis Vertical Mill |
| Asset Description Notes: |
Bridgeport Series I EZ-Trak 2-axis CNC Vertical Mill. Specifications: Table Travel (X) 30"; Saddle Travel ( Y) 12";Quill Travel (Z ) 5"; Knee Travel ( Z ) 16". 9" X 48" Table with Chrome Ways. 3 HP Variable Speed Head. R-8 Taper Spindle. Automatic Lubrication. Kurt Power Drawbar.
DX-32 2-Axis Control with 3 Axis Digital Readout in Manual Mode. Precision Ground Ballscrews. Remote Stop/Go Switch. RS 232 Port & Floppy Drive
Condition: Like New |
| Machine ID: |
2019
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Matsuura |
| Short Description: |
Matsuura RA-IIF, 5 axis vertical machining center, Yasnac control. |
| Asset Description Notes: |
MATSUURA RA-IIF Dual Pallet 5 Axis Vertical Machining Center. Control YASNAC I80. Pallet 23.6"L x 14.9"W. MAX Pallet Load 550 LBS. Pallets 2. Travels: X-23.62", Y-16.14", Z-18.5". Rapid Traverse: 945 IPM (X,Y), 708 IPM (Z). Feedrate 393.7" IPM. Spindle Speed 30- 8,000 RPM, Motor 20 HP, Taper BT-40. MAX Tool Diameter 3.77" / 6.8" adj. empty, MAX Tool Length 11.8", MAX Tool Weight 22 LBS. Tool change time 2 SEC. (tool to tool), Pallet change time 9 SEC. YASNAC I80 Control, TSUDAKOMA 2 axis rotary table, 30 ATC, Automatic Pallet Changer, Full Enclosures, Synchronized Tapping, Spindle Oil Cooler, High Pressure coolant thru spindle (1000 PSI), Chip Conveyor. 1 machine left. Parts machine available for $5K if you want(needs drive motor). |
| Machine ID: |
2017
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Brother |
| Short Description: |
Brother TC-321N, CNC Drill and Tap machine, CNC 500 control, twin rotary tables. |
| Asset Description Notes: |
Brother TC-321N, CNC Drill and Tap machine. Brother CNC-500 Control, Parallel Pallet Changer, 2 - 10" NSK Vertically Mounted CNC Rotary Tables with MDI Pendants. 10 Station Turret,
X- 27.6" x Y-11.8" x Z- 9.84".
Max Spindle Speed - 6000 RPM, Max Tapping Speed 4000 RPM, Taper BT30, Rapid Traverse X/Y 984 IPM- Z 787 IPM. Cutting Feed Rate 394 IPM. |
| Machine ID: |
2013
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Knee, CNC |
| Brand Name: |
Bridgeport |
| Short Description: |
1989 Bridgeport knee mill with TRAK A.G.E. 2 |
| Asset Description Notes: |
1989 Bridgeport knee mill with TRAK A.G.E. 2 control - P/N 20180R, S/N 6743 7/11/00. x and y-axis programmable with teach mode. z-axis DRO. Power driven spindle. 1HP v-belt drive. |
| Machine ID: |
1987
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Kiwa |
| Short Description: |
Kiwa Excel Center - 4L, CNC vertical machine center with tooling, Fanuc 10M. |
| Asset Description Notes: |
Kiwa Excel Center - 4L, CNC vertical machine center with tooling, Fanuc 10M. All manuals, RS-232 port, coolant pump, chip pan, ATC-16, BT40 taper, 10HP spindle, 31.5" x 18" x 22" travels. Some Tooling seen in pictures included. Nice machine used in a 1 man shop, owner retiring, must go! |
| Machine ID: |
1936
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
NuTech |
| Short Description: |
NuTech CNC vertical milling machine |
| Asset Description Notes: |
NuTech CNC vertical milling machine. X-axis travel 132"; Y-axis 7". 2HP A-axis drive. Ajax 3-axis CNC control Linux based conversational, M or G-codes. Can be set up with conventional milling head or revolver sharpening attachments. Milling Head: Central Machinery 12-speed belt drive milling head. 120-2,500 rpm. 1-1/2 HP 115/230/1. Spindle travel 5". Drill capacity 1-1/4"; face mill 3"; end mill 3/4". R8 spindle taper. Note: Miller base with 8" x 29" work table included. Revolver Sharpening attachment: 4" DeWalt disc grinder (see video) |
| Machine ID: |
1903
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vertical |
| Brand Name: |
Alliant |
| Short Description: |
Alliant 42SC knee mill |
| Asset Description Notes: |
Alliant 42SC knee mill with 2-axis DRO. Power feeds X and Z. X-axis travel 30"; Y-axis 12"; knee 16"; quill 5". Meehanite castings. One-shot lube. R8 collet chuck (collets not included). Yuasa vise included. |
| Machine ID: |
1887
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
CompuMill |
| Short Description: |
CompuMill 3000 3-axis CNC knee mill |
| Asset Description Notes: |
Compumill 3000 CNC knee mill model ST-N w/Dynapath 10 control having table travel of 27.5" x 13". Vertical quill travel of 5" and manual knee travel of 16". Spindle nose is NST #40. Machine is in good working condition and under power. Main Allen Bradley power switch needs repair.
|
| Machine ID: |
1870
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Bridgeport |
| Short Description: |
Bridgeport knee mill, 2-axis TRAK AGE 2 CNC |
| Asset Description Notes: |
Bridgeport vertical knee mill with 2-axis TRAK AGE 2 CNC control P/N 20180R, S/N 127003 3/30/07. 3-axis DRO. X, Y, Z and knee are powered. Table 9 x 48". 2J variable speed drive, 2HP. Bijur Lube. Video Available. |
| Machine ID: |
1867
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vertical |
| Brand Name: |
Gorton |
| Short Description: |
Gorton 2-30 vertical milling machine with Trace Master |
| Asset Description Notes: |
Gorton 2-30 vertical milling machine with hydraulic Trace Master copy attachment. 12" x 54" table. X-axis travel 36"; Y-axis 12"; knee travel 15"; quill travel 6"; ram travel 12". Spindle taper #40. Quill feed 0-4 ipm. Table & saddle feed 0.5-35 ipm. General Signal 110/220/440v 15 Kva transformer included. Spare TraceMaster unit shown below available for an additional $125. |
| Machine ID: |
1861
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
FRYER |
| Short Description: |
FRYER VB-40 CNC OPEN MACHINING CENTER |
| Asset Description Notes: |
FRYER VB-40 with Anilam 5300 control with rigid tapping. 40 x 20 x 23" travel. 600 ipm rapid with floppy drive steel way covers work lamp & spare "M" function. Can be programmed conversationally or "G" code. Has built in CAD/CAM program, programmble flood coolant, 20 station tool changer, CAT-40 spindle. Tooling & vise not included. RS-232 port & 1 gig part storage memory. 15 HP spindle drive. Solid way construction. |
| Machine ID: |
1857
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Enshu |
| Short Description: |
Enshu VMC 530, vertical machining center, 20HP, 4000 RPM. |
| Asset Description Notes: |
Enshu VMC 530, 50 taper, 20 HP, 4000 RPM, Fanuc 11M. Travels: X 40", Y 21", Z 22". Rapids IPM: X 590, Y 590, Z 472. Cutting Feed Rate: 157 IPM. 30 ATC with 30 tool holders. 4th axis rotary table, 5th axis manual. |
| Machine ID: |
1788
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Fadal |
| Short Description: |
Fadal VMC 4020 HT model 906-1, rebuilt 2008. |
| Asset Description Notes: |
Fadal 4020 HT model 906-1 vertical machining center. Complete rebuild/calibration March 2008. 21-position ATC. Cat 40 taper. X-travel 40"; Y and Z travel 20". Main spindle nose to table 4"-24" A-axis board installed (A-axis spindle is not included in sale). |
| Machine ID: |
1786
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Fadal |
| Short Description: |
Fadal VMC 4020 AHT model 917-1, rebuilt 2008. |
| Asset Description Notes: |
Fadal 4020 AHT model 917-1 vertical machining center. Complete rebuild/calibration March 2008. 21-position ATC. Cat 40 taper. X-travel 40"; Y and Z travel 20". Spindle nose to table 4"-24". Wired for 4th axis. Running parts, come see it on the seller's floor. |
| Machine ID: |
1765
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert/Uni CNC |
| Brand Name: |
Bridgeport |
| Short Description: |
Bridgeport miller CNC 2 Axis control. |
| Asset Description Notes: |
Bridgeport series II J head variable speed to 4,200 rpm. X-travel 22"; Y-travel 12"; Z-travel 6". After market conversion to CNC with Galil controller card, CamSoft ver 15.5 PC-based software, X & Y West Amp MT233 servo motors, Z motor IIC Inc. MT2004-36. R-8 collets |
| Machine ID: |
1740
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Fadal |
| Short Description: |
Fadal VMC 6030, vertical machining center, Refurbished by Fadal. |
| Asset Description Notes: |
FADAL VMC 6030, New 1996, Equipped with Manual Pulse Generator, High Speed CPU Option, Graphics, 4th Axis Prewire, RS-232 Port, Multiple Part Program Storage, Self Diagnostics, Heavy Duty Box Ways, 21 Station ATC, Axis Error Compensation, Cutter Compensation, and Liquid Cooled Spindle with Chiller. Travels: (X-Axis)60", (Y-Axis)30",(Z-Axis)28". Feed Rates (X & Y-Axes)0.1 to 250 IPM, (Z-Axis)0.1 to 250 IPM. Rapid Traverse Rate (X, Y, Z) 400 IPM. Spindle Speeds 40-10,000 RPM. Spindle CAT 40 Taper. Power On Hours 15671. Running Hours 5531. Fadal replaced Thrust bearings and gone through the machine top to bottom. |
| Machine ID: |
1606
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Cincinnati |
| Short Description: |
Cincinnati Milacron 20VC-1800 vertical machine center with rotary table. |
| Asset Description Notes: |
Cincinnati 20VC-1800 vertical machine center with Tsudakoma NC rotary table, model RNCBK-501-RI, 20" table, Mitsubishi scale with original ±3 second accuracy. Travels: X-72" x Y-30" x Z-30". Spindle speeds 20-4000 RPM. Feeds .5 - 200 IPM. DynaPath Systems Inc control- Delta 20 CNC. 30 ATC, Tool Holders, and Cat 45 Holders and Tools as seen in photos available. RS-232 Port. Hydraulics pump and chiller unit. Well maintained, come see it on the seller floor operating. |
| Machine ID: |
1559
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Tree Journeyman 310 |
| Short Description: |
Millenium Tree Journeyman 310, 3-axis CNC knee mill. |
| Asset Description Notes: |
Tree Journeyman 310/Millenium 3100, 3-axis CNC knee mill. Table travel 27" (X); saddle travel 14" (Y); quill travel 5" (Z); manual knee travel 15.75". This machine is in great condition, and very clean. It can be seen under power and has all manuals. Original owner. Tooling includes 12 Cat-30 holders, 30 180-DA collets, Kurt vise. Owner can load machine on your truck. |
| Machine ID: |
1021
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert/Uni CNC |
| Brand Name: |
Bridgeport Acu-Rite |
| Short Description: |
Bridgeport Series 1 with Acu-Rite 2 axis CNC controller, 9" x 48" table. |
| Asset Description Notes: |
Bridgeport Series 1 Miller with Acu-Rite CNC 2 axis controller, Variable speed head, Digital Z axis tied into Acu-Rite, 9 x 48" Table, 10 Gallon Recirculating Coolant Pump. Bijur Hand way oiler. Travel = X:27", Y:9". Kurt Vise and many tooling extras available. Acu-Rite Type: MT33DH4044 Includes many End mills, New and Resharpened. Under Power in the tool room. |
| Machine ID: |
1016
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Knee, CNC |
| Brand Name: |
Bridgeport Acu-Rite |
| Short Description: |
Bridgeport Miller with Acu-Rrite 2 axis controller & digital Z. |
| Asset Description Notes: |
Bridgeport Series 1 Miller with Acu-Rite CNC 2 axis controller. Variable speed head. Digital Z axis tied into Accurite. 9 x 42" Table. 10 Gallon Recirculating Coolant Pump. Bijur Hand way oiler. Travel = X:20", Y:10". Kurt vise and many tooling extras available. Must see piece of equipment. Under Power in the tool room. |
| Machine ID: |
951
Click here to see machine details |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Mazak |
| Short Description: |
Mazak vertical machining center. VTC-41 model. |
| Asset Description Notes: |
Mazak VTC-41, 24 position tool changer, Mazatrol EIA control, Cat 40 tools, 3 axis, 7hp spindle motor. Rapid Traverse X/Y, Z, 757 / 590 IPM. Tool change time 8 seconds, Table Top to Spindle Nose 4.33" - 24.4". X-axis: 22", Y-axis: 16", Z-axis: 20". |
| Machine ID: |
2237 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert/Uni CNC |
| Brand Name: |
Bridgeport |
| Short Description: |
Bridgeport Series I CNC miller |
| Asset Description Notes: |
Bridgeport Series I CNC miller EZ Trak DX with 3-axis DRO and 2 axis power. 9" x 48" table. Includes power draw and Accu-lube spray lube. Loaded on your truck. |
| Machine ID: |
2198 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Bed Type CNC |
| Brand Name: |
ProtoTRAK |
| Short Description: |
SWI ProtoTRAK DPM SX3 CNC Bed miller, SMX 3-axis control. |
| Asset Description Notes: |
SWI ProtoTRAK DPM SX3 CNC Bed miller, SMX 3-axis control. 5HP Spindle Motor. Table 50" x 10". Travel (X, Y, Z axis) - 31 x 17 x 23.5". Quill Diameter 3-15/16". Maximum Quill Travel 5". Spindle taper NMTB 40. RPM 70-3950 vari-speed head. MAX Weight of Workpiece 1320 lbs. Rapid traverse X, Y, Z - 150 IPM. Meehanite castings,
Slide ways are Turcite coated, Wide way surfaces are hardened and ground. Drilling max capacity, Varispeed head 1" dia. Milling max capacity, Varispeed head 5 inch3/min. Tapping max capacity, Varispeed head 1". Auto Lube Pump. Kurt vise and 6 tools included with machine.
|
| Machine ID: |
2170 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
FADAL |
| Short Description: |
Fadal VMC6030, Model 907-1, CNC 88 control, vertical machining center. |
| Asset Description Notes: |
Fadal VMC6030, Model 907-1, CNC 88 control. ATC 21, CAT 40, 22.5 HP.Table: 62.5" x 30". Coolant pump and pan. Travels: (X-Axis)60", (Y-Axis)30",(Z-Axis)28". Feed Rates (X & Y-Axes)0.1 to 250 IPM, (Z-Axis)0.1 to 250 IPM. Rapid Traverse Rate (X, Y, Z) 400 IPM. Spindle Speeds 40-10,000 RPM. Tools & cart included. |
| Machine ID: |
2108 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Accessories |
| Brand Name: |
Midaco |
| Short Description: |
Midaco series 60SD automatic pallet changer |
| Asset Description Notes: |
Midaco series 60SD automatic pallet changer. Electric servo drive, dual air blast at each contact pad. Handles 60" x 19.5-29" x 2" pallets. 4,000-lb pallet load capacity. Requires only 2 M-functions for operation. |
| Machine ID: |
1841 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
Enshu |
| Short Description: |
Enshu DT-CL, Dyna Tapping Center, CNC Drilling and Tapping Center, 1994, Low Low Hours. |
| Asset Description Notes: |
Enshu DT-CL, Dyna Tapping Center, CNC Drilling and Tapping Center. Yasnac ENAC-1 controller. 16 ATC with some holders, 2 Position Rotary table(work on one piece while staging the second piece), Rigid tap, RS 232 Port, 30 Taper, Gray Mills SuperFlo 1/2HP coolant pump and chip pan. Cutting feed rates: 0.04 to 196.9 IPM. Travels: 19.7”X x 11.85”Y x 11.8”Z, Rapid Traverse rates X, Y, and Z: 1,417 IPM. All manuals, all original servos and spindle, has been well maintained. On time hours 2531 and Cut hours 776. Can demo anytime or ask for video. |
| Machine ID: |
1523 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Horiz , CNC |
| Brand Name: |
Kearney & Trecker |
| Short Description: |
Kearney & Trecker Moduline horizontal milling machine. |
| Asset Description Notes: |
Kearney & Trecker (Milwaukee) Moduline CNC horizontal milling machine X-axis travel 72"; Y-axis 48"; Z-axis 32". Delta 20 CNC control put in in the early 80’s by Compumachine. Rotary table moves in 5° increments. 2-1/4" hydraulic straight shank spindle. Numerous tool holders included. |
| Machine ID: |
1427 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vertical |
| Brand Name: |
Bridgeport |
| Short Description: |
Bridgeport Series 1 with Heidenhain DRO |
| Asset Description Notes: |
Vertical Mill, Bridgeport Series 1, SN 185124, 2HP. Wired for 440 Volts, 3 phase. Has 208-230 volt capabililty. Continuous variable speed. 42 inch table. Heidenhain POS-E-Touch II DRO. Bijur lube system. 4" riser installed. Includes (36) piece R8 collet set 1/8"-7/8", Kurt vise, (2) 1/2" Jacobs drill chucks, assorted end mills and cutting tools, parallels, clamps and work holder set. Also includes Bridgeport right angle adaptor, Bridgeport horizontal milling adaptor with saw spacers and tooling cart. Taken out of service in 2007. Can be seen under power. |
| Machine ID: |
1426 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vertical |
| Brand Name: |
Bridgeport |
| Short Description: |
Bridgeport Series 1 vertical mill. |
| Asset Description Notes: |
Vertical Mill, Bridgeport Series 1, SN 214008, 2HP. With Bridgeport factory quick change collet spindle. Wired for 440 Volts, 3 phase.
Continuous variable speed. 42 inch table. Includes collet holder set, collets, vise, assorted cutting tools, and work holder set. Taken out of service in 2007. Can be seen under power. Taking Offers, must go! |
| Machine ID: |
1009 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Knee, CNC |
| Brand Name: |
Proto Trak |
| Short Description: |
Southwestern ProtoTRAK MX3, TRAK DPM. |
| Asset Description Notes: |
ProtoTRAK MX3, TRAK DPM(dual purpose mill), CNC vertical milling machine, 2-1/2 axis machine, 10" x 50" t-slotted table, 30" x-travel, 17" y-travel, 28"z-travel, 5" quill travel, head swivels 90 degrees, variable speed, 4,200 max rpm, cat 40 spindle taper, Kurt power drawbar, coolant mister, auto-lube, proto trak mx3 (3-axis cnc) controls, 3hp motor. |
| Machine ID: |
625 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Universal |
| Brand Name: |
Super Max |
| Short Description: |
Super Max YC1 9 x 42 miller w DRO, collets & hold downs |
| Asset Description Notes: |
Super Max YC1 3 axis milling machine with Analam Wizard 350 Plus Digital Read out and a Mitutoyo 6" Z axis digital scale. Machine includes nice Kurt vice, Set of R8 Collets, Set of table hold downs and a light.
Varidrive, 60-4200 RPM. |
| Machine ID: |
584 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Knee, CNC |
| Brand Name: |
Bridgeport |
| Short Description: |
Bridgeport Prototrak miller |
| Asset Description Notes: |
Bridgeport miller J2, Prototrak MX2
Align powered knee, Kurt machine vise,
9 x 42" table, collets, 1/2" Jacobs drill chuck,
& rapid traverse table. |
| Machine ID: |
547 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert/Uni CNC |
| Brand Name: |
Bridgeport |
| Short Description: |
Bridgeport J2 Prototrak |
| Asset Description Notes: |
Bridgeport miller J2, Prototrak MX2
Align powered knee, Kurt machine vise,
9 x 42" table, collets, 1/2" Jacobs drill chuck,
& rapid traverse table. |
| Machine ID: |
393 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert/Uni CNC |
| Brand Name: |
TREE |
| Short Description: |
TREE Journeyman 220 CNC miller |
| Asset Description Notes: |
TREE 2-Axis CNC programmable(x-y) and (z)Axis is manual. 42" table with 12"x30" travel. All manuals and collets available. NU-Mist coolant unit. |
| Machine ID: |
223 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Horiz , CNC |
| Brand Name: |
Mazak |
| Short Description: |
Mazak Micro Center H-12N 80 station horizontal machining center |
| Asset Description Notes: |
The Mazak is a Horizontal full 4 axis milling center with interchangeable twin pallet capability. It has a direct drive with 12 horsepower motor. RPM capability is 10K, XYZ co-ordinates are 24" x 18" x 18". The tool holding is CAT40 and it has 80 tool capacity. The controls are 'Mazatrol', a system unique to Mazak. Unit includes a Ruby tipped probe and oil mist collection unit. Holds TP capability of approx +/- .001". Machine comes with 2 tomb stones. Pallet dimensions are 19.5" square. Unit has an automatic chip conveyor for chip removal from work area. Machine is clean and maintained well.
|
| Machine ID: |
222 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Machining Cntr/Miller |
| Machine Type: |
Vert , CNC |
| Brand Name: |
MHP |
| Short Description: |
Moog MHP CNC Vertical Machining center with 4th axis & 24 positions |
| Asset Description Notes: |
Moog MHP - B22 Vertical Milling Center with Live 4th Axis rotating table. 24 position tool changer - auto carosel. Uses standard cat#40 tool holder. On site overhaul 6 months ago. New spindle bearings, ground taper on head and table was ground and scraped. Holds to .0005 TP Accepts DNC and Floppy drive programming. Updated to version 3 program. Books and manuals included. |
|
