| Machine ID: |
1881
Click here to see machine details |
| Category: |
Plastics - Equipment |
| Machine Type: |
Injection |
| Brand Name: |
BOY |
| Short Description: |
BOY 22M, 24.2 ton injection molding machine, 24mm screw size. |
| Asset Description Notes: |
BOY 22M Dipronic, 24.2 ton, Horizontal injection molding press. Procan MD microprocessor control. Clamping force: 24.2 tons (220 kN). Platen daylight: 15.75 inches (400 mm). Opening stroke: 7.87 inches (200 mm) max. Clearances between tie bars: 10.00 inches (254 mm). Screw diameter: (24 mm). Injection volume: 1.24 - 3.9 in3 (20 - 64 cm3). Shot capacity: 0.68 - 2.17 oz. (19.2 - 61.5 g). Maximum injection pressure: 11,860 - 37,520 psi.
Hydraulic ejector stroke: 3.15 inches (80 mm). Resin funnel Manual. Must sell, seller is interested in offers! |
| Machine ID: |
1828
Click here to see machine details |
| Category: |
Plastics - Equipment |
| Machine Type: |
Injection |
| Brand Name: |
VanDorn |
| Short Description: |
Van Dorn 75-ton 5-oz injection molding machine |
| Asset Description Notes: |
Van Dorn 75-ton, 5-ounce hydraulic plastic injection molding machine with core pull. Motor replaced 2007 as part of CL&P co-op electric efficiency upgrade program |
| Machine ID: |
1782
Click here to see machine details |
| Category: |
Plastics - Equipment |
| Machine Type: |
Injection |
| Brand Name: |
Cincinnati |
| Short Description: |
Cincinnati Milacron VT85-5, 85 ton, with sprue picker included. |
| Asset Description Notes: |
Cincinnati Milacron VT85-5, 85 ton, with sprue picker included. Apex robot systems keypad. Toggle clamp and 5oz shot. Platten size 22"L/R x 19.5"T/B, 12.2" Clamp Stroke, Ejector Stroke 4.72", hydraulic knockouts and 1.38" screw diameter. Make Offers, must go! |
| Machine ID: |
1766
Click here to see machine details |
| Category: |
Plastics - Equipment |
| Machine Type: |
Injection |
| Brand Name: |
Engel |
| Short Description: |
Engel ES 200H/80V/50, 2 shot, 55 ton injection molding machine with rotary table. |
| Asset Description Notes: |
Engel ES 200H/80V/50, 2 shot color, 55 ton injection molding machine with rotary table. Table diameter 975mm(39.39"), Injection: Vertical 80cc, shot size 0.8 ozs, Screw Diameter 18mm(0.709"), Injection pressure 30,000 PSI. Injection: Horizontal 200cc, shot size 4.4 ozs, Screw Diameter 35mm(1.378"), Injection pressure 23,505 PSI. Controls CC100A01. |
| Machine ID: |
1635
Click here to see machine details |
| Category: |
Plastics - Equipment |
| Machine Type: |
Injection |
| Brand Name: |
Toshiba |
| Short Description: |
Toshiba 190 ton 10.2 oz ISG190 plastic injection molding machine. |
| Asset Description Notes: |
Toshiba 190 Ton, 10.2 Oz 1998 Toshiba Injection Molding Machine. Model: ISG190NV10-5B Platen size: 31.1" X 29.1" Distance between tie-bars: 22.0" X 20.00" Max. mold open stroke: 28.3" Min. mold height: 9.1" Daylight: 37.4" Max. hyd eject force: 7.16 tons Max. eject stroke: 4.7"
Equipped with:
Core pull;
Xaloy X102 barrel;
Hopper magnet;
Vibration mounting pads;
Hamilton central vacuum loader S/N HA00-910;
ASG Automation sprue picker model SP-650.
(6) machines available - price is each |
| Machine ID: |
1328
Click here to see machine details |
| Category: |
Plastics - Equipment |
| Machine Type: |
Accessories |
| Brand Name: |
NDC Systems |
| Short Description: |
NDC Infrared extruded film thickness gage. |
| Asset Description Notes: |
NDC Systems is the leading gauging equipment supplier to the sheet extrusion industry. The Model 6100T, Gamma Ray Thickness Gauge is a low cost scanning system designed for continuous display of crossweb product profile. The Model 6100T features a high resolution (720x348 pixel)7" CRT with touchscreen control interface for ease of use and understanding unmatched by other systems. The operator can access all aspects of the system via the touchscreen i.e., scanner contro, target settings , recipes , alarms, reports , auto control set-ups and profile displays selections. Features: One-sided Measurement,
Small Probe is Easily Installed in Confined Spaces, Touchscreen Controls, Typical Accuracy to better than 0.25%, Small Measurement Area (0.25 inches, 6mm diameter) Offers High-Resolution. Relatively Insensitive to Changes in Opacity, Color , and Composition (including carbon black and Ti)2) . Rarely needs Recalibration. Multi-Language Displays, On-Screen High/Low Alarms, 50 standard Product recipes stored in Non-volatile Memory, Programmable Security Lock-Out, Uni-directional or Bi-directional Scanning, Optional Automatic Control of Line or Extruder Screw Speed, Optional SPC /SQC with x, Range , and Cpk Calculation and Plotting. Have full specs and capabilities, call to inspect on the seller's floor. $50K system new.
|
| Machine ID: |
859
Click here to see machine details |
| Category: |
Plastics - Equipment |
| Machine Type: |
Injection |
| Brand Name: |
Yuhdak Machinery Co. |
| Short Description: |
Yuh-dak Y310-50-15, 30 Ton Clamp 1.5 oz shot, vertical molding press. |
| Asset Description Notes: |
Yuhdak model Y310-50-15, vertical injection molding machine, 408-volt transformer included. 1.5 oz. shot size. 30 ton clamp force, 26mm Screw Diameter, 1,500 lb ejection force. Plexiglass guarding in place. Used from 2001 to 2003. Machine ran 2 shifts occasionally. Manual available. Heater bands replaced in 2003, ODGEN gauges replaced originals for better accuracy. Machine in very good operating condition. Contact Yuh-Dak North America @ 877-898-6949 for parts and service. Complete specs on this machine available, just ask. Machine must sell! Make Offers! |
| Machine ID: |
1626 Sorry, this machine is no longer available. Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Plastics - Equipment |
| Machine Type: |
Injection |
| Brand Name: |
Newbury |
| Short Description: |
Newbury 30 Ton, HV1-30RS, Injection molding machine. |
| Asset Description Notes: |
Newbury 30 Ton, HV1-30RS, Injection molding machine. 1-2 oz. shot size. Horizontal Clamp and Vertical Screw. 6"L x 4"W Platten size. Vibro feet. |
| Machine ID: |
1625 Sorry, this machine is no longer available. Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Plastics - Equipment |
| Machine Type: |
Injection |
| Brand Name: |
Boy |
| Short Description: |
BOY 22S Dipronic, 24.2 ton injection molding press. |
| Asset Description Notes: |
BOY 22S Dipronic, 24.2 ton, Horizontal injection molding press. Clamping force: 24.2 tons (220 kN).
Platen daylight: 15.75 inches (400 mm).
Opening stroke: 7.87 inches (200 mm) max.
Clearances between tie bars: 10.00 inches (254 mm). Screw diameters: .72/.88/.96/1.12/1.28 inches (18/22/24/28/32 mm). Injection volume: 1.24 - 3.9 in3 (20 - 64 cm3). Shot capacity: 0.68 - 2.17 oz. (19.2 - 61.5 g). Maximum injection pressure: 11,860 - 37,520 psi.
Hydraulic ejector stroke: 3.15 inches (80 mm). Manual. Must sell, seller is interested in offers! |
| Machine ID: |
873 Sorry, this machine is no longer available. Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Plastics - Equipment |
| Machine Type: |
Extruder |
| Brand Name: |
Royle |
| Short Description: |
Royle 10", 8:1 L/D Alurobe extruder. |
| Asset Description Notes: |
Royle extruder line with pelletizer system. This unit was used in a cable extrusion line. Designed to produce approx 3500lbs/hr, with: ROYLE Generation 2000 Alurobe heavy duty, 10” 8:1 L/D Extruder, Electric heat with closed loop fluid cooling, BERINGER Type ULC-80 Screen Changer with hydraulic power unit, GALA Model SLC-7 Pelletizer underwater type with material dryer; Strip Conveyor; Bucket Conveyor with Ram Feed. 200 HP, 60 RPM screw speed. Call for further details. |
| Machine ID: |
628 Sorry, this machine is no longer available. Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Plastics - Equipment |
| Machine Type: |
Accessories |
| Brand Name: |
Advantage |
| Short Description: |
Advantage water heater |
| Asset Description Notes: |
Advantage Water Heater,
Model 75-925, Serial #5262,
208 volts, 3 phase, 60 hz, 30 amps., KW zone 9.
Temperature range 30 degrees f - 250 degrees f.
Maximum operating pressure 100 pounds.
|
| Machine ID: |
313 Sorry, this machine is no longer available. Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Plastics - Equipment |
| Machine Type: |
Injection |
| Brand Name: |
Yudak |
| Short Description: |
Semi-Auto 30ton molding presses |
| Asset Description Notes: |
Yudak molding machines(Model Y310), only 2 left. $4200 each.
Transformers included, 408 volt. Shot size 1-1.5oz. 2000lb ejection pressure, 30 ton clamp pressure.Completely guarded and Safety Light bar equipped.Used from 2001 to 2003. Machines in good operating condition.
|
|