| Machine ID: |
2178
Click here to see machine details |
| Category: |
Waste Treatment |
| Machine Type: |
Filter Press/Dryer |
| Brand Name: |
Filtratec |
| Short Description: |
Filtratec model 150/30 filter press |
| Asset Description Notes: |
Filtratec model 150/30 filter press with (2) sets of (11)gasketed four eye center fed recessed polypropylene plastes rated 5.71 cu ft cake capacity @ 100 psi operating pressure. Dual acting hyraulic ram (rebuilt 2008), on legs. Cake cart included. |
| Machine ID: |
2124
Click here to see machine details |
| Category: |
Waste Treatment |
| Machine Type: |
Incinerator/Autoclave |
| Brand Name: |
JOY |
| Short Description: |
JOY Energy Systems medical waste incinerator, Model 750 TES, 570 lbs/hour capacity, gas fired. |
| Asset Description Notes: |
Joy Energy Systems medical waste incinerator, Model 750 TES, capable of burning 573 lbs/hr waste stream. Gas fired, Ash rake, Scrubber, Chart recorder, updated Fanuc control panel, hydraulic ram feeder. All permits, blueprints, records available. Unit is still burning waste daily, well maintained indoors. Complete with Superior Boiler Works, Model 4-WH-625, heat recovery boiler. Video available. |
| Machine ID: |
1999
Click here to see machine details |
| Category: |
Waste Treatment |
| Machine Type: |
Filter Press/Dryer |
| Brand Name: |
Sperry |
| Short Description: |
Sperry E Filter Press Non Gasketed type, 630mm, 6.3 Cu Ft. |
| Asset Description Notes: |
Sperry E filter press, 6.3 cu.ft. cake capacity. Non Gasketed filters. Plate and frame 4 corner return. 40 Plates(630mm @24"). Plate Size 24" x 24", Type 41-42, Max operating pressure 100 psi. Pneumatic Auto Closing Device.
|
| Machine ID: |
1991
Click here to see machine details |
| Category: |
Waste Treatment |
| Machine Type: |
Shredders |
| Brand Name: |
E. V. Evans |
| Short Description: |
EvaShear model EV30E medium duty shredder |
| Asset Description Notes: |
EvaShear model EV30E medium duty shredder suitable for electronic boards, hard drives, medical waste, office waste. (2) 7-1/2HP motors with separate planetary reduction gearboxes. PLC controlled auto reversal for jams. 27" x 27" hopper opening; 12-1/2" x 12" chamber opening. 5/8" (14mm) standard cutter width - optional 5/32 (4mm), 5/16(8mm)and 15/32 (12mm) widths available. 6" cutter diameter; 5" spacing between shafts. |
| Machine ID: |
1985
Click here to see machine details |
| Category: |
Waste Treatment |
| Machine Type: |
Clarifier/Lamella |
| Brand Name: |
Aqualogic |
| Short Description: |
Aqualogic clarifier system |
| Asset Description Notes: |
The system is composed of (2) tanks. The first tank is 77”H x 76”W x 210”L. Flocculant is mixed with the water to be treated in the first tank. A low speed mixer on a trolley keeps the floc suspended. This mixture is pumped into the second tank (86”H x 48”W x 202”L) where settling occurs. The settled sludge is then pumped to a filter press for final dewatering. Filter Press not included. |
| Machine ID: |
1866
Click here to see machine details |
| Category: |
Waste Treatment |
| Machine Type: |
Filter Press/Dryer |
| Brand Name: |
Met-Chem |
| Short Description: |
Met-Chem model MC470-1 1 cu ft filter press |
| Asset Description Notes: |
Met-Chem 1 cu. ft. filter press, (5) 470mm center feed gasketed polypro plates, manual hydraulic pump and 25-ton cylinder. Heavy duty steel skeleton, painted with two part epoxy; notched and bolted side bars; Air blow-down manifold; complete with first set of MC-30 polypropylene filter cloths and Buna-N gaskets, sludge spatula and manual. |
| Machine ID: |
1642
Click here to see machine details |
| Category: |
Waste Treatment |
| Machine Type: |
Filter Press/Dryer |
| Brand Name: |
JWI |
| Short Description: |
JWI 800mm J-Press, 10 cu.ft. Sidebar Filter Press. |
| Asset Description Notes: |
JWI 800mm, J-Press, Sidebar Filter Press Skeleton, Model 800G32-20-10-DR100. Auto-Closure(Air/Hydraulic). Stainless Steel slide rails on frame for plates. Unit uses 32" x 32" plates. 32mm Cake Thickness, Manual available, 100 PSI. Volume 10 cu. ft. Regular Discharge Manifold. No Tail(1) and Intermediate Plates(19), Head Plate still on machine. Replacement Plates and cloths are $16,600. New system costs $34-36 approx. depending on options. |
| Machine ID: |
888
Click here to see machine details |
| Category: |
Waste Treatment |
| Machine Type: |
Filter Press/Dryer |
| Brand Name: |
Sperry |
| Short Description: |
Sperry E Filter Press Non Gasketed type, 630mm, 6.3 Cu Ft. |
| Asset Description Notes: |
Sperry E filter press, 6.3 cu.ft. Cake capacity. Non Gasketed filters. 40 Plates(630mm @24"). Plate Size 24" x 24", Type 41-42, Max operating pressure 100 PSI. Pnuematic Auto Closing Device. |
| Machine ID: |
1969 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similiar machine. |
| Category: |
Waste Treatment |
| Machine Type: |
Incinerator/Autoclave |
| Brand Name: |
Beloit |
| Short Description: |
Beloit rotating autoclave system |
| Asset Description Notes: |
Used Beloit inclined 304 stainless drum rotating autoclave. Approximately 36" wide X 12' long. Rated 100 psi @ 300°F. SN RC-1001. 1995. 10HP SEW Eurodrive 230-460V/595 variable speed drive. Includes control panel, Hick Hargreaves SHR 2950 75HP vacuum pump, Burgess Manning muffler plus assorted valves and plumbing. |
|
