Lathes
Many industries rely on lathes to handle metalworking for their products; they've been an essential component of shops for as long as anyone can remember. But purchasing a new lathe can be an intimidating investment. Greasy Machines can make that investment less terrifying by providing you with a selection of reliable used metal lathes.
Lathes spin a block of metal against a tool that shapes the block. The lathe's shaping tool can utilize abrasion, cutting, or other techniques to carve the metal into the desired shape. Highly polished ornamental designs can be achieved with metal lathes; alternately, a lathe can be used to do comparatively rough shaping of an object, to be fine-tuned later in the manufacturing process. Lathes are available in a wide range of sizes and with different fittings to work best on different types of projects.
There are several types of metal lathes on the market, and Greasy Machines can supply you with whichever type is needed at your company. CNC lathes are often desirable in industrial settings, and we generally have a selection of them available. Vertical engine lathes, horizontal engine lathes, and precision lathes can all be found, researched, and bid on at Greasy Machines.
We are here to assist sellers with moving equipment you no longer need and we're also here to assist buyers in finding the used machine that will fit their needs best. We inspect and evaluate all the machines we sell. This means that you can purchase a used metal lathe from Greasy Machines and feel sure that the machine is not on the market simply because it's worn out. We provide condition reports for every machine we handle. The knowledgeable person looking for a used lathe knows that there are standards that must be met, and that an older machine can be, perhaps contrary to instinct, a better investment than a newer machine. The technicians and sales representatives at Greasy Machines can talk to you about your needs, and about the machine inventory available, to find the best match for you.
| Machine ID: |
2366
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Milltronics |
| Short Description: |
Milltronics ML18/60 CNC combination lathe, Centurion 7 control, 18HP. |
| Asset Description Notes: |
Milltronics ML 18 CNC combination lathe. 19" Swing x 60" Centers, 9.25" Over Cross Slide. 2.56" Spindle Bore, 2.03" Bar Capacity. 10" 3-jaw chuck, Optional Turret 8 position with riser block, Tool post holder, Steady Rest and Follow Rest. Tailstock, quill travel 6", quill dia. 3.15", quill taper MT5. Centurion 7 control w/12" LCD, Conversational, G or M code or complete manual control, Teach mode, Remote Pendant. Rapids (X/Z) 500IPM, Feedrate 100IPM. Auto lubrication and Flood Coolant. Boring Bar holder(7). Complete with Addonics IDE Digidrive(3.5" floppy, flash card drives). Full enclosure and Chip pan, Manuals and Software. RPM 100-2600. Machine has only 1725 on time hours, maybe a few hundred cutting hours, can demo under power anytime. Machine has all available Packages, A- Software Package, B- Convenience Package, C- Performance Package, D- High Speed Large Program Package. Machine cost over $59K new as optioned. 1 Owner and operator machine, ready to deliver asap. |
| Machine ID: |
2351
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Monarch |
| Short Description: |
Monarch Metalist CNC lathe, 20 x 66, GE control. |
| Asset Description Notes: |
Monarch Metalist CNC lathe, Swing 20" x Centers 66". 10" 3 jaw chuck, Faceplate, Steady Rest, Tail Stock, Chip Conveyor. 9 station turret with holders. Tail stock dead centers, various jaws for chuck, machine prints and manuals. GE control replaced in last 3 years. General Numeric Tape Reader included. Spindle runs smooth and quiet at both hi and low speeds. Must go! |
| Machine ID: |
2340
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma LC40-2SC 4-axis Simulturn lathe, twin turret. |
| Asset Description Notes: |
1989 Okuma LC40-2SC, Simulturn 4 axis turning center. Swing 23". 2.75" dia max bar. 1250mm bed length. 12-position upper turret; 8-position lower turret. X-axis travel 20". Z-axis travel upper 21.65"; lower 20.28". OSP 5000L-G control. Hennig Chip Conveyor included. Under power on the seller's floor. |
| Machine ID: |
2332
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
OKUMA |
| Short Description: |
OKUMA CADET LNC-8C, CNC lathe, OSP 5020L, year 1996. |
| Asset Description Notes: |
OKUMA CADET LNC-8C, OSP 5020L control. 10" Chuck, MAX Diameter 9.84", MAX Swing 15.75". Rapid Traverse Rates 472 IPM. Spindle Motor 10 HP. Spindle Nose / Spindle Bore JIS A2-6" / 2.20", Spindle Speed 75 - 4,200 RPM. Tailstock Spindle Travel 4.72", Tailstock Taper/Diameter of Quill MT # 5 / 3.54", 12 Position Turret. Cross slide Travel 6.89", Longitudinal Travel 19.69". Tool pre-setter. Turbo chip conveyor. Oil mist collector. Collet chuck NOT included. |
| Machine ID: |
2330
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
OKUMA |
| Short Description: |
OKUMA LC40-2ST, 4 axis Simulturn, twin turrets, CNC lathe, OSP 5020L. |
| Asset Description Notes: |
Okuma LC40-2ST, Simulturn 4 axis turning center. Swing 23", 15" 3-jaw chuck. 750mm Bed. 2.75" dia max bar. 12-position upper turret; 8-position lower turret. X-axis travel 20". Z-axis travel upper 21.65"; lower 20.28". OSP 5020L control. Chip Conveyor included. Under power and running parts on the seller's floor. Machine will be available end of June. |
| Machine ID: |
2277
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
OKUMA |
| Short Description: |
OKUMA LC20-1ST, CNC 2 axis lathe. (300 x 250) 15HP |
| Asset Description Notes: |
OKUMA LC20-1S, CNC 2 axis lathe. Swing 15.75", MAX turning dia. 11.81", Max Length 9.06", Max allowable weight 880 lbs. Splindle nose A2-6", Bore diameter 2.05", Internal Taper MT#6, Spindle Speed 65-3500 RPM. Turret 8 Position. Cross Slide Z 20.47", Cross Slide X 6.89", Rapids: X/Y- 200/400 IPM. Cutting Feed rate X/Y: 0.0001- 3.2000 IPR. Motor 15HP cont duty, 20HP 30 minute rating. Hydraulic unit 10.6 gallons, Coolant 23.8 gallons. Still turning parts daily and holding tolerances in an Aerospace environment.
|
| Machine ID: |
2246
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Excel |
| Short Description: |
Excel SL 320/600 CNC lathe |
| Asset Description Notes: |
Excel SL 320/600 CNC lathe X and Y axis. We changed the turret head about 2 years ago. We renewed the old one, we give it with the machine. Chuck: 10". We used it in one shift. We use it at present, we just buy a new one, that's way we sell it. Dimensions metric. |
| Machine ID: |
2176
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma model LR-15 CNC lathe |
| Asset Description Notes: |
Okuma twin turret model LR-15 CNC lathe. Swing over bed 17.72";
Swing over saddle 11.81";
Swing over cross slides 9.84"; Maximum turning diameter 9.45";
Maximum turning length 9.84".
Rapid traverse rates:
X & U axes 472 IPM;
Z & W axes 591 IPM.
Hole through spindle 2.44";
Spindle nose A2-6.
Main motor 20 HP.
Upper turret 10 position;
Lower turret 8 position; some tooling included.
Approximate weight 11,800 lbs. This machine has spent its whole life cutting plastic and is in excellent working condition - don't pass it up. Conveyer is included. Have factory build sheet and all manuals.
|
| Machine ID: |
2168
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Hitachi Seiki |
| Short Description: |
Hitachi Seiki HT 20S III, Seicos L Multi, CNC lathe. |
| Asset Description Notes: |
Hitachi Seiki HT 20S III CNC lathe with Seicos L Multi control. Swing 18", Max turning Length 15". RS 232 port, 8" 3-jaw Chuck, Tool Pre-setter, 10-station Turret, Programmable Tailstock. Bar Capacity 2". Mayfran chip conveyor. Under 3000 cutting hours! |
| Machine ID: |
2155
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Hyundai |
| Short Description: |
Hyundai CNC Lathe Model HiT-8G |
| Asset Description Notes: |
Hyundai CNC Lathe Model HiT-8G. Lexair (Production Dynamics) Full Bore® FB8-20 collet chuck. Gang type tool table - 8 stations. Max cutting diameter 6.3"; max cutting length 6.3". X-axis travel 19.3"; Z-axis 12". Spindle bore 1.96"; spindle nose A2-5. Rapid traverse 945 ipm; cutting 196 ipm. 12" CRT; RS-232. Machine has worked in a Seal Manufacturing environment to make Lip seals and Axle seals. Has cut only plastics. |
| Machine ID: |
2091
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
Turret, CNC |
| Brand Name: |
Hardinge |
| Short Description: |
Hardinge CHNC II, CNC Chucker lathe. |
| Asset Description Notes: |
Hardinge CHNC II, CNC Chucker lathe. Swing Over Bed 14". Maximum Threading and Turning Diameter 8". Spindle Speeds 50 to 5000 RPM. 16C Collet Capacity 1-5/8". Hole Thru Spindle 1-7/8".
8 Position Turret: Square Tool Size 3/8", Round Tool DIA. UP TO 5/8", MAX X-axis Travel 4.5",
MAX Z-axis Travel 12". MAX X and Z axis Feedrate 200 IPM. MAX distance from Turret face to spindle 12.5". Indexing time (STATION 1 TO 8) 2 Seconds, Indexing time (STATION TO STATION) 1 Second. 5" Diameter Power Chuck. Chip conveyor. Lighting and coolant. |
| Machine ID: |
2089
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Mazak |
| Short Description: |
Mazak Quick Turn 28 CNC lathe |
| Asset Description Notes: |
Mazak Quick Turn 28 (model QT-28-U) CNC lathe 1989. 20" swing over bed, 12.8" max turn diam., 38" between centers, 3,500 rpm variable speed spindle, 2.5" spindle bore, 10" 3-jaw chuck, 12-position turret, tool pre-setter, 12" elevation chip conveyor. |
| Machine ID: |
2088
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma Cadet LNC-8C CNC lathe |
| Asset Description Notes: |
Okuma model LNC-8C Cadet CNC lathe 1995 est. With Smog Hog, Travels X-axis 7"; Z-axis 20". 15.75" swing, 9.84" max cut diam, 15" cut length; 2.2" spindle bore; 2" bar capacity; 12-position turret; 3,500 rpm; coolant thru tooling, collet chuck, tail stock, 14" elevated chip conveyor. RS-232 ports. (3) machines available. Price is each. |
| Machine ID: |
2087
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Tatung Okuma |
| Short Description: |
Tatung Okuma ES-L6 CNC lathe 2003 |
| Asset Description Notes: |
Tatung Okuma ES-L6 CNC lathe, 2003. Travels X-axis 6.1"; Z-axis 12.6"; Max Swing 21.65"; Max turn dia 8.27"; Max turn length 11.02". Spindle Bore 2.09". Rapid Traverse: X-787, Z-984. 12-position turret, Index time (1.1 sec). 6,000 rpm, flood coolant, 6" Hyd 3-jaw and collet chucks. Tail stock: M.T. No. 4, Dead Quill,Quill Dia 2.17", Quill stroke 3.15". 7.5 HP Cont, 15HP (10 min). Chip conveyor. |
| Machine ID: |
2055
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma Impact LU15, 4 axis cnc lathe, OSP 7000 control. |
| Asset Description Notes: |
Okuma Impact LU15, 4 axis cnc lathe, OSP 7000 control. Swing over bed 20.9" (530mm); Swing over carriage 15.0" (380mm); Swing over cross slide 13.0" (330mm); Center Distance 23.6" (600mm); Spindle dia. 3.94" (100mm); Spindle thru-hole 2.44" (62mm). Upper Turret 12 position, Lower Turret 8 position, Collet chuck, Programmable tailstock, flood coolant, and chip conveyor. Double palm button safety interlock installed. 4 machines available, price is each. These machines were dedicated to a specific part each, no job shop use. Under power for inspections on seller floor. |
| Machine ID: |
2041
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Demoor |
| Short Description: |
DEMOOR CNC Slant-Bed Oil Field Lathe with 10.23" Bore Hole |
| Asset Description Notes: |
DEMOOR model 750CNC Slant-Bed Oil Field Lathe with 10.23" bore hole. Swing Over Bed 30.70"; Swing Over Cross Slide 21.25"; Distance Between Centers 98.42". Spindle Bore 10.23";
Spindle Speeds 0-650 RPM;
Spindle Motor 60 HP/43 HP DC.
Cutting Feed Rate 236 IPM;
Rapid Traverse Rate 394 IPM.
EQUIPPED WITH:
Fagor 8055T CNC Control (Retrofit 2003);
25" Rohm Pneumatic Front & Rear Chucks, w/ 10.4" Bore;
4-Position Turret;
Steady Rest (19.685" Dia.);
Hydraulic Tailstock with Live Center;
Coolant. Price includes loading. |
| Machine ID: |
1990
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
SNK |
| Short Description: |
SNK(Shin Nippon Koki) SUT-50 CNC 2 axis lathe, 2" bar capacity. |
| Asset Description Notes: |
Used SNK SUT-50 CNC lathe with chip conveyor. 20.5" swing; 6.37" turning diameter; 13.37" between centers; 6000 RPM; 1.69" through hole. 12-position turret. 5C collet attachment. 6" 3-jaw chuck with extra jaws. Tailstock: quill diameter 2.36", quill taper MT-No.3, quill stroke 2.36". Rapid traverse x & y axis: 236 ipm/472 ipm. Collets, Tool holders and manuals. RS-232 port. |
| Machine ID: |
1964
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
AMERICAN |
| Short Description: |
AMERICAN 4025 W CNC Lathe, 40 x 120", MDSI control. |
| Asset Description Notes: |
American 40" x 120" heavy duty universal CNC turning center model 4025W. Retrofit in 2000 with MDSI open CNC PC based control multiple part program storage, full program & edit at the control. Heavy duty flat bed, hardened & ground ways, 21" hydraulic chuck, 36" face plate, 4" bar cap, steady, follow, 6 position interchangeable programmable turret or 4 position tool post, large movable chip guard, flood coolant, chip conveyor, misc tooling. Manuals. 40" swing, 25" over carriage, 4.625" bore, 400 ipm rapid. 21” cross slide travel. New z-axis ball screw & nut installed. Heavy duty tail stock included. |
| Machine ID: |
1902
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
Engine |
| Brand Name: |
Enco |
| Short Description: |
Enco 405 GX 1000 engine lathe |
| Asset Description Notes: |
Enco model NCO405X1000 engine lathe. This 80s vintage machine was built before Enco made everything cheap. This machine is rock solid. 16" swing x 40" centers with 2" spindle bore. X-axis travel dial, coolant system, 8" 3-jaw chuck, steady and follow rests, metric and English threading, foot brake, gear head. Tool post shown NOT included. |
| Machine ID: |
1893
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
Turret, CNC |
| Brand Name: |
Mori Seiki |
| Short Description: |
Mori Seiki SL-1 CNC lathe |
| Asset Description Notes: |
Mori Seiki SL-1 CNC lathe. Swing over bed 16.5"; over carriage 6.2" Max turning dia 4"; max length 9-1/2". X-axis travel 3.3"; Y-axis 10.8". X-axis rapid 157 ipm; Y-axis 315 ipm. Tailstock - taper MT #3. 8-pos turret. Spindle bore 1.57; spindle nose A2-5. Yasnac 2000GII power supply. |
| Machine ID: |
1871
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
American |
| Short Description: |
American Panther Universal CNC lathe |
| Asset Description Notes: |
American Panther Universal Shaft and Chucking Lathe model 2208 with end and side turrets. 14 tool capacity. Max turning diameter 18" end turret; 8" side turret,
22" Swing Over Ways. 20" distance between ways. X-axis travel 56"; Y travel 17-1/2".
4- 5/8" Bar Capacity.
78" Between Centers. 0.1-400 ipm variable feed rate. TailStock.
30 Horsepower DC Drive
Full Computer Numerical Control
General Automation Adapt-A-Path |
| Machine ID: |
1827
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
Gap |
| Brand Name: |
Harrison |
| Short Description: |
Harrison M400 gap lathe |
| Asset Description Notes: |
Harrison model M400 gap lathe. Swing 16" X 60" (26" in gap). A1-8 Spindle Mount. Spindle Bore 2-5/8". 2 Axis Sony Magna Scale digital read out.
Aloris type tool post with holders. 12" 3 jaw H.D. Chuck needs spindle mount. 23" Face plate, Jacobs 5c collet nose, Steady Rest, Drill Chuck for tail stock, Coolant Pump and Tank, set up for Inch, Whitworth & Metric threads. Excellent Condition
Inspect under Power.
|
| Machine ID: |
1801
Click here to see machine details
|
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
American |
| Short Description: |
American CNC lathe. 32" x 96", model 3220S. |
| Asset Description Notes: |
American CNC lathe. 32" x 96", model 3220S. Swing over bed 33.5", Swing over carriage 32", Swing over cross slide 21". Spindle Thru Hole 3". Spindle Speed 10-1500 RPM, Spindle Nose L-2, D1-8". Tailstock: Spindle Dia. 5", Spindle Length 30", Spindle Travel 12". Center Distance 96". Square and Hexagon Turret Tool Holders each 8" with 12 Index Points. Coolant pump. Well kept machine in daily use in extremely tight tolerance shop doing aerospace work. |
| Machine ID: |
2334 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
OKUMA |
| Short Description: |
OKUMA LC40-2ST Simulturn 4 axis CNC lathe. |
| Asset Description Notes: |
Okuma LC40-2ST, Simulturn 4 axis turning center. Swing 23", 15" 3-jaw chuck. 750mm Bed. 2.75" dia max bar. 12-position upper turret; 8-position lower turret. X-axis travel 20". Z-axis travel upper 21.65"; lower 20.28". OSP 5020L control. Chip Conveyor included. Under power on the seller's floor. |
| Machine ID: |
2333 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
OKUMA |
| Short Description: |
OKUMA LB35 II, CNC lathe, OSP 7000, 1995 year. |
| Asset Description Notes: |
OKUMA LB35 II, CNC lathe, OSP 7000L control. Max Swing Over Bed 27.56", Swing Over Carriage 16.93", X-Axis Travel 17.72", Spindle Speeds to 3,200 RPM, 15" 3- Jaw Chuck, 12-Station Tool Turret, Tail Stock, A8 spindle nose, 33" (850mm) bed length. Standard 3" Max Bar, Chip conveyor. |
| Machine ID: |
2319 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
SouthWestern Industries |
| Short Description: |
ProtoTRAK TRL 1630SX, CNC lathe, SLX controls, year 2008. |
| Asset Description Notes: |
ProtoTRAK TRL 1630SX, CNC lathe, SLX controls. Centers 30", Swing 16", Swing over saddle 16",
Swing over cross slide 8.6", Cross slide travel 8.5". Coolant tank capacity- 9.3 gal.
Width of Bed-12.6", Height of Bed-12.6".
Spindle Nose (Camlock)-D1-6, Spindle through hole-2.12". Spindle taper-MT#6. Spindle speed 150-2500 RPM. Tailstock, Spindle Motor HP -7.5
Power requirements, control-110V; 1P; 8 A
Power requirements, machine-220V;3P;60Hz.
Dimensions shipping - 87 x 45 x 67". Max rapid feed X - 100, Max rapid feed Z - 150. Coolant pump motor -1/8 HP. OptionalFeatures: Work lamp, Remote Stop/Go switch, Networking/Memory option, TRAKing, SLX Advanced features, Pnuematic chuck holder.
|
| Machine ID: |
2303 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
SouthWestern Industries |
| Short Description: |
ProtoTRAK TRL 1745P, CNC lathe, LX2 control, year 1997. |
| Asset Description Notes: |
ProtoTRAK TRL 1745, CNC lathe, LX2 control. 8" Chuck, 2" Spindle bore, 17" Swing, 45" Centers. Tool Post, Tail Stock, Steady Rest, Chip Pan, Coolant tank and Pump. 40-2200 RPM. |
| Machine ID: |
2291 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
SouthWestern Industries |
| Short Description: |
SouthWestern Industries ProtoTRAK TRL 1840V, CNC lathe, VL control. |
| Asset Description Notes: |
ProtoTRAK TRL1840V CNC lathe. 18.5" swing over bed; 9" over cross slide; 40.25" centers; 13" cross slide travel. 2.36" Spindle thru hole. Tail stock Quill travel 7-1/8", Quill diameter - 2.96", Quill taper hole - MT#5; 8" 3-jaw chuck. Coolant tank capacity - 13 gal. 10 HP, Hi-Lo Spindle speeds 80-2500 RPM. Steady Rest. New cost is $44K. MUST GO ASAP! Make offers!
|
| Machine ID: |
2273 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
Horiz , CNC |
| Brand Name: |
Fryer |
| Short Description: |
Fryer Easy Turn, ET-21 CNC Combination Lathe, like new 2009, only 157 hours. |
| Asset Description Notes: |
Fryer Easy Turn-21 CNC Combination Lathe. 15HP. 2 Speed Autoshift, Geared Headstock, 10-2000 RPM w/ Constant Surface Speed. Swing Over Bed: 21”.
Center Distance: 40”. X-axis travel 12"; Z-axis travel 37". Spindle Nose: D1-8 Camlock. Spindle Bore: 3.15”. 8 position bi-directional turret; 10 inch 3 jaw hydraulic chuck, Fryer Touch 2000i Conversational Control also reads "G" code. Early power failure detection. Double nut ballscrews. Fluorescent work lamp, Automatic lube system w/ low lube fault, Manual tailstock, Rigid tapping. Has done very little work, small part time shop, machine is in like new condition, paint is not even chipped inside the enclosure. Only 157 hours, machine costs $70K new. |
| Machine ID: |
2203 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma Howa |
| Short Description: |
Okuma Howa NC-4PS, 2 axis CNC Lathe, 8" Chuck and Tail stock. |
| Asset Description Notes: |
Okuma Howa NC-4PS Lathe, 8" Chuck, 8 position Turret and Tail stock. 12" Turning diameter and 24" Center distance. Max Work Length 19.7", Hole Through Spindle: 2.28", Spindle Speed Range 35-3500 rpm. Travel X: 6.29", Travel Z: 20.07". Rapid Traverse Rate X: 196 IPM and Rapid Traverse Rate Z: 196 IPM. Must Sell Immediately! |
| Machine ID: |
2102 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
ProtoTRAK |
| Short Description: |
ProtoTRAK TRL1840SX CNC lathe |
| Asset Description Notes: |
ProtoTRAK TRL1840SX CNC lathe. 18.5" swing over bed; 9" over cross slide; 40.25" centers; 13" cross slide travel. 2.36" Spindle thru hole. Tail stock Quill travel - 7 1 /8",
Quill diameter - 2.96", Quill taper hole - MT#5; 8" 3-jaw chuck; collet chuck. Coolant tank capacity - 13 gal. Factory options: DXF converter; Advanced features; TRAKing option. Aloris tool post not included. |
| Machine ID: |
2000 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Ikegai |
| Short Description: |
Ikegai AX40N, CNC slant bed lathe, 32" swing, Fanuc 6T. |
| Asset Description Notes: |
Ikegai AX40N, CNC slant bed lathe, 32" swing, 25" Hyd 3-Jaw Chuck, 3.94" Spindle bore, 80" Center Distance, 12 position turret, 10-800 RPM, Fanuc 6T. |
| Machine ID: |
1986 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Hitachi-Seiki |
| Short Description: |
Hitachi-Seiki 4NE-600 CNC lathe |
| Asset Description Notes: |
Hitachi-Seiki 4NE-600 CNC lathe type A028-0047-B101 with Mayfran 8" chip conveyor. Includes tooling (see photos), Tail stock with (2) live centers, 6" 3-jaw chuck, (8) sets of jaws, (12) position turret. 1 owner machine |
| Machine ID: |
1796 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma |
| Short Description: |
Okuma Howa NC-4PS Lathe, 8" Chuck and Tail stock. |
| Asset Description Notes: |
Okuma Howa NC-4PS Lathe, 8" Chuck, 8 position Turret and Tail stock. 12" Turning diameter and 24" Center distance. Max Work Length 19.7", Hole Through Spindle: 2.28", Spindle Speed Range 35-3500 rpm. Travel X: 6.29", Travel Z: 20.07". Rapid Traverse Rate X: 196 IPM and Rapid Traverse Rate Z: 196 IPM. Seller bought $1000 in Tool holders recently(June) that go with the machine. Must Sell Immediately! |
| Machine ID: |
1768 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Fryer |
| Short Description: |
Fryer ET-18 Combination Toolroom Lathe |
| Asset Description Notes: |
Fryer ET-18 Combination Toolroom CNC 18x40 flat bed lathe features both manual & CNC operation, conversational or G code w/ auto teach. Includes TouchCAD Offline software. 2-speed head with auto shift and fully programmable spindle speed with constant surface feed. Spindle is a D1-6 camlock with spindle bore of 2.05. Includes 10" 3-jaw Buck type chuck, 4 post indexable Dorian Q1TP40 tool post, Jacobs drill chuck 1/32"-3/4", spindle stop. The control has a touch screen & 4.0 gig part storage memory, ac brushless drives and 400 ipm rapid. Control features 3D solid model verify. |
| Machine ID: |
1659 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Southwestern Industries |
| Short Description: |
SWI TRAK TRL 1440P CNC lathe LX2 control |
| Asset Description Notes: |
Southwestern Industries TRAK TRL 1440P with LX2 control. 14" swing over bed, 40" center max, 1-5/8" spindle thru hole, 18 spindle speeds from 35 to 2,400 rpm, D1-6 camlock spindle nose. Tailstock quill travel 5-1/2", quill diameter 1-7/8", quill taper MT-3. Quick change toolpost and chuck not included. Cross slide needs scraping and tightening. Documentation and manuals available. Seller can load on your truck.
|
| Machine ID: |
1654 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
Bench Top |
| Brand Name: |
Enco |
| Short Description: |
Enco 110-2034 Gap lathe, 12 x 36". |
| Asset Description Notes: |
Enco 110-2034 Gap Bench lathe with Cabinet, 12" Swing x 36" Center Distance. 110/220 Volt, Single Phase. 3-Jaw, 4-Jaw chucks, Steady Rest, Follow Rest, Compound, Cross slide 6", Tool Post holder, Tailstock Spindle Travel 3-5/8". Spindle through hole 1-7/16". Inch/Metric Threads Tool Box, extra gears, dead center, oil can, T handle wrenches(3), extra jaws(3). |
| Machine ID: |
1644 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Okuma Howa |
| Short Description: |
Okuma Howa NC-4PS Lathe, 8" Chuck and Tail stock. |
| Asset Description Notes: |
Okuma Howa NC-4PS Lathe, 8" Chuck, 8 position Turret and Tail stock. 12" Turning diameter and 24" Center distance. Max Work Length 19.7", Hole Through Spindle: 2.28", Spindle Speed Range 35-3500 rpm. Travel X: 6.29", Travel Z: 20.07". Rapid Traverse Rate X: 196 IPM and Rapid Traverse Rate Z: 196 IPM. Must Sell Immediately! Taking offers! |
| Machine ID: |
1640 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Miyano |
| Short Description: |
Miyano GN-4W, 2 axis, twin CNC lathe. |
| Asset Description Notes: |
Miyano GN-4W, twin horizontal CNC lathe. 2 separate work stations, each with own Fanuc O-T control. Turning Capacity: Max Diameter w/Air Chuck(4 inch) 3-5/32", w/Collet Chuck 1". Head Stock and Spindle: Spindle End Diameter 3.937", Hole Thru Spindle 1.024", Bore of Closing Tube .606". Spindle Speed: Drive Motor(infinitely variable)3/5HP. Speed Change Rate variable, Speed 200-4000 RPM. Slide: Dovetail guideway, X axis 10", Z axis 10". Rapids X: 236 IPM, Z: 315 IPM. Tool Shank Size 10 and 13mm square. Coolant System: High Pressure Coolant, 18.5 Gallon Tank, Pump Motor 1/4 HP. Air Pressure 12-100 PSI. Manuals available. Well maintained in a Aircraft Mfg environment, currently powered for 480V. Make Offers! |
| Machine ID: |
1630 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
Precision |
| Brand Name: |
Hardinge |
| Short Description: |
Hardinge DSM-59 second op. precision lathe |
| Asset Description Notes: |
Hardinge DSM-59 second operation precision lathe COMPLETE REBUILD less than 400 hours ago. 9" swing, 17" centers. Spindle capacity 1-1/16" with round 5C collet, 1-5/16" with chuck. Refurbished
- New Spindle bearings were installed in headstock, then spindle-nose was re-ground "true".
- Cross slide and Turret were re-ground and refurbished.
- Turret tool holes were bored from 5/8” to ¾” Shank Dia. to accommodate a broader selection of standard tooling options. This modification allowed our tooling arsenal to be shared with other lathes and mills, such as Boring heads, ER collet holders, Tapping heads, Drill chucks, as well as standard ¾” shank turret lathe tooling. Hardinge 5/8” shank tooling may still be used, by using a split bushing to gain size.
- An “Overhead Cutter Slide” was added to accommodate standard “Cut-Off” blades for maximum rigidity and productivity. Form tools may also be mounted here.
- R+L tool post adaptor base plates (2) were designed and fabricated to mount a standard “Quick Change” DTM Tool Post at either end of the Cross slide. Much better than the old “Hardinge Design”, it allows more versatility, quicker set-ups, and tool re-sharpening, without incurring the usual time for resetting the tooling.
- An air-operated collet closer was added, and it has a foot switch included.
- Coolant system has a solenoid valve added for instant shut-off - making for easy part removal.
- Splashboard is fixed to back, to keep chips and coolant in the tray.
- Operators Manual / Parts list, plus equipment file folder.
.............................................................................................................................................
Various tooling is available for purchase, but is not included with price of this machine:
DTM tool post and tool holder set (sliding gibbs, not piston type)
Skiving Tool set, holds diameters within two tenths (.0002”)
Self-opening threading die chasers (4)
Misc:
Turret turning tools, vee and roller types
Knurling tools, micro (Bump type)
Turning heads for turret
R+L Tapping head. |
| Machine ID: |
1585 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Daewoo |
| Short Description: |
Daewoo Puma 230C, Slant Bed CNC lathe. |
| Asset Description Notes: |
Daewoo Puma 230C, Slant Bed CNC lathe. Programmable Tail Stock and Tool Presetter. Swing Over Bed 21", Swing Over Saddle
13", Max. Turning Diameter 13.8", Max. Turning Length 21.1".
TRAVEL
X-Axis Travel 9.5" (2.4+5.7), Z-Axis Travel
22.8".
Spindle Speed 3,500 rpm, Spindle Bore 3.03", Bar Capacity 2.76". Spindle Bearing inner diameter 5.1".
TURRET 10 position. OD Tool Size 1.0"
Boring Bar Diameter 1.5"
Indexing Time 0.15 sec
FEEDRATE
Rapid Traverse X: 945 ipm, Z: 1200 ipm.
Cutting Feedrates X, Z 20 in./rev.
TAILSTOCK
Quill Diameter 3", Quill Travel 3.15". Kitagawa 10" Chuck and Tool Holders. No Chip Conveyor. 17,500 Power On hours, 10,000 Run hours. 1 owner machine. |
| Machine ID: |
1555 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
CNC |
| Brand Name: |
Miyano |
| Short Description: |
Miyano JNC-35, 2 Axis CNC lathe. |
| Asset Description Notes: |
Miyano JNC 35 2-axis CNC lathe. 10" swing. Bar Capacity, Round 1.38", MAX. Turning Length 15.56", Single stock tube, Spindle Speeds 50 TO 6,000 RPM, Main HP 7.5, Spindle Nose A2-5, FANUC 3T CNC Control, 8 Position Turret, Tail Stock, Coolant, Programmable Tailstock, RS232 SERIAL PORT, Advance/Return Foot Pedals and Chip Conveyor. |
| Machine ID: |
1217 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
Speed |
| Brand Name: |
Hardinge |
| Short Description: |
Hardinge HSL-59 Speed Head lathe. |
| Asset Description Notes: |
Hardinge HSL-59 Speed Head lathe * secondary lathe for production. * Polishing Speed Head * 3 speeds from 750-3000 rpm. * 2 Units available -you pick. * 1 unit has compound for cutting & the other has Secondary table. Both have 5C collect holder. *2nd machine S/N HSL-5C-4285T |
| Machine ID: |
1169 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
Engine |
| Brand Name: |
Colchester |
| Short Description: |
Colchester, 13 x 36" Engine Lathe |
| Asset Description Notes: |
Colchester Engine Lathe that is in excellent condition. Fully function and ready to put into service. 13" swing x 36" bed; Spindle thru-hole 1-5/8". Model: 13 x 36; Serial: 28599 B H. 3-jaw and 4-jaw chucks included |
| Machine ID: |
1147 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
Engine |
| Brand Name: |
South Bend |
| Short Description: |
South Bend Model A, 16" engine lathe. |
| Asset Description Notes: |
South Bend 16"(swing)lathe, 52" bed length, 33" center distance. 3 Jaw chuck with spare jaw teeth. Threads/Feeds, Jacobs drill chuck, tail stock, compound stock & steady rest. Nice daily use machine. |
| Machine ID: |
1014 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
Gap |
| Brand Name: |
Sharp |
| Short Description: |
Sharp Gap Bed Lathe model 1640C w Dorian Tool System and Tooling. S/N 8807103 |
| Asset Description Notes: |
Sharp Gap Bed Lathe Model 1640C. 16" Swing x 40" Center distance. 16 Spindle speeds: 20 - 2000 RPM Speed control. Swing over Cross Slide 8.75", Swing over Gap 24.375". Spindle Bore 2.0625". Metric & Inch dials and threading. Steady Rest, Follow Rest, Dorian Tool Post System. 10 holders - boring bars, cut off, knurler, tool bits. Foot Brake, Travel Dial, Indicator for position location. 3 Jaw Bison & 4 Jaw Bison Chucks and Face Plate. Tailstock travel 4.75". Jacobs Drill Chuck, Live Center and more. 220/440V 3 Phase, currently wired for 240 Volts. Lots of tooling - dozens of carbide inserts, bits and drills. Must See Lathe! |
| Machine ID: |
486 Sorry, this machine is no longer available.
Please click here to submit a request for assistance in locating a similar machine. |
| Category: |
Lathes |
| Machine Type: |
Horizontal Engine Lathe |
| Brand Name: |
South Bend |
| Short Description: |
South Bend Lathe |
| Asset Description Notes: |
South Bend lathe, 5' bed & 13" swing.
3 jaw chuck, drill chuck, 5C Draw w/Nose piece.
Live center & carriage stop. Other tooling available. 3 units available. |
|
