|
Machine ID: |
3627 Click here to see machine details |
Category: |
Finishing-Cleaning |
Machine Type: |
Aqueous Wash |
Brand Name: |
Robomat |
Short Description: |
Pero Robomat 3/U Single chamber wash system, Demo machine |
Asset Description Notes: |
Pero Robomat 3/U, Demo Machine, approximately 500 hours!
Single chamber wash system ROBOMAT/U is applied for very demanding cleaning requirements of parts surfaces, for example before phosphating, painting or before final assembly.In the system there are two automatic operations:
Washing of the parts to remove dirt and chips with detergent concentrations 2-5 %.
Rinsing of the parts with clear rinse and detergent concentration 0.5-1%.
The rinse operation removes, besides the additional washing effect, the wash detergent residue from the parts.
The washing and rinsing fluids are returned to their respective tanks through drain flaps in the work chamber.
After the cleaning cycle is over the safety door raises 4 inches. The drying operation is enhanced by the blower exhausting the vapor mist and drawing air from the room into the chamber.
Specs:
(2) Wask Tanks: 210 gallons each
Heating time: 2 Hours
Rotating Spray Pipe: 2 RPM
Drive: .2 HP
Spray Wand
Wash and Rinse Pump
Volume at 45 psi (each: 237 ft3/min
Exhaust Ventilator
Vol at 20/90 psi: 250 ft3/min
Heating Power
Wash 27 Kva; Rinse 18 Kva
Part Weight Capcity: 3300 lbs
Work Table Dimensions: 83"L x 33"W x 28"H
Max Weight of Work Piece: 3,300 lbs.
Skimmer
Contact Nick with machine questions and for Shipping/Rigging quotes at nick@greasymachines.com or call 860-940-6146. |
|
|
Machine ID: |
3324 Click here to see machine details |
Category: |
Finishing-Cleaning |
Machine Type: |
Aqueous Wash |
Brand Name: |
Richwood |
Short Description: |
RST Aqueous Parts Washer model PW6000, stainless construction, 360 degree heated spray wash |
Asset Description Notes: |
Richwood aqueous spray parts washer. Batch washer.
Working Area: 36” x 36” x 36”
Door Opening: 37” x 37” x 37”
Working Cabinet: 48” x 48” x 48” with two(2) stainless steel row-rollers on the bottom
NOTE: Customer to supply own baskets
Load Capacity: 700 pounds
Exhaust Duct on top (no blower motor) 6”
Spray Maniolds:
4 pipe line on each side, 4 nozzles each pipe line, 4 pipe lines on top with 4 nozzles each pipe line
(Total: 12 pipe lines and 48 nozzles)
Water Volume required: 9L each nozzle x 48 = 432L (112 gal/min) @ 70 psi
8.3L each nozzle x 48 = 398L ( 103 gal/min) @ 60 psi
Pump: 15 HP, max capacity @ 70 psi; 130 gal/min
Inverter control makes PSI adjustable instead of by-pass
Tank Capacity: 140 gal, screen filter on top
Rinse Tank: 8 gallons
Working Temperature: 160 F (71C)
Rinse Temperature: 180 F (82C)
Heaters:
21 kw for Wash tank and 5 kw for Rinse tank
Controls:
Digital Temp. controller, Timer, Pressure Gauge, Pump Volume, Emergency Stop.
In-let Solenoid, Overflow 2”, Drain 2”
90 Day Warranty |
|
|
Machine ID: |
2475 Click here to see machine details |
Category: |
Finishing-Cleaning |
Machine Type: |
Vibratory |
Brand Name: |
Vibro Finish |
Short Description: |
Vibra Finish VF-4FB, 4 cubic foot curved wall vibratory bowls |
Asset Description Notes: |
Vibra Finish VF-4FB, 4 cubic foot curved wall, flat bottom vibratory bowls. Channel Width 9". Tub Diameter 46". Water inlet and spray. Drain. 2HP motor, 230 volt. Controls with soap pumps and metering. 2 units available, price is each, No Media. Video available. Made In Canada. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|