Call: 860-940-6146
Search

Machine Brokers That Work for You

Catalog

Gear Machinery
Search By...
Advanced Search
Back to Catalog
Machine ID: 3502 Click here to see machine details
Category: Gear Machinery
Machine Type: Gear Cutting
Brand Name: GLEASON
Short Description: Gleason Phoenix 250HC, Hypoid Bevel Spiral Gear Cutting machine
Asset Description Notes:

Gleason Phoenix 250HC CNC Hypoid Cutting Machine.
  • Control: CUPROC Series 2000 CNC
    Capacities -
    Face Milling:
  • Extreme Ratio 10:1
  • Full Depth (Max) 1.00" (25.4mm)
  • Face Width (Max) 2.60" (66mm)
  • Range of Tooth Numbers 5 to 200 Inclusive
  • Max pitch Diameter of Typical 35° Spiral Angle Gear Using Maximum Cutter Diameter -12" Diameter Cutter
    At The Following Ratios:
  • 1:1 13.50" (342.90mm)
  • 2:1 16.00" (406.40mm)
  • 3:1 16.00" (406.40mm)

    Face Hobbing:
  • Extreme Ratio 10:1
  • Full Depth (Max) 0.60" (15.24mm)
  • Face Width (Max) 2.00" (50.8mm)
  • Range of Tooth Numbers 5 to 200 Inclusive
  • Max pitch Diameter of Typical 35° Spiral Angle Gear Using Maximum Cutter Diameter 350mm Diameter Cutter
    At The Following Ratios:
  • 1:1 10.56" (268.22mm)
  • 2:1 10.83" (275.00mm)
  • 3:1 10.83" (275.00mm)

    Cutter Diameters:
    Face Milling:
  • Conventional Face Sharpened & RSR-C 2.75" - 12"
  • HELIXACT & VERSACUT II 100mm - 320mm
    Face Hobbing:
  • TRI-AC 102mm - 210mm

    Machine Specs:
  • X-Horizontal Travel -4.50 to +7.00" (-114mm to +178mm)
  • Y-Vertical Travel -7.00" to +7.50" (-178mm to +190mm)
  • Z-Sliding Base Travel -5.20" to +19.70" (-131mm to +500mm)
  • B-Root Angle -3° to 90°
  • Machine center to Work Spindle Face 6.50" (165mm)

    AXES SPEEDS
  • X-Horizontal 0 to 3.15"/Sec (0 to 80mm/Sec)
  • Y-Vertical 0 to 3.15"/Sec (0 to 80mm/Sec)
  • Z-Sliding Base 0 to 3.15"/Sec (0 to 80mm/Sec)
  • A-WorkSpindle 0 to 83 RPM 90 to 33 RPM metric)
  • B-Swinging Base 0 to 30 Deg/Sec
  • C-Cutter 0 to 400 RPM

    Work Spindle Dimensions:
  • Diameter of Taper Hole - Large End 5-3/64"(50 Taper)
  • Taper Per Foot 21/32"
  • Depth of Taper 5.29" (134.37mm)
  • Diameter of Hole Through Spindle 3.35" (85.22mm)

    This is a (1) Owner machine, Surplus to a large Aerospace manufacturer. Currently in Storage.


    For additional, freight & rigging information contact Nick at 860-940-6146 or nick@greasymachines.com

  • Back to Catalog