Call: 860-940-6146
Search

Machine Brokers That Work for You

Gleason Phoenix 250HC, Hypoid Bevel Spiral Gear Cutting machine

Back to Gear Machinery
Machine ID: 3502
Email this Listing to a Friend
Please log in to bookmark this listing.
Asking Price: $49,500 - Make an Offer

I Need Financing
Asset Description Notes:

Gleason Phoenix 250HC CNC Hypoid Cutting Machine.
  • Control: CUPROC Series 2000 CNC
    Capacities -
    Face Milling:
  • Extreme Ratio 10:1
  • Full Depth (Max) 1.00" (25.4mm)
  • Face Width (Max) 2.60" (66mm)
  • Range of Tooth Numbers 5 to 200 Inclusive
  • Max pitch Diameter of Typical 35° Spiral Angle Gear Using Maximum Cutter Diameter -12" Diameter Cutter
    At The Following Ratios:
  • 1:1 13.50" (342.90mm)
  • 2:1 16.00" (406.40mm)
  • 3:1 16.00" (406.40mm)

    Face Hobbing:
  • Extreme Ratio 10:1
  • Full Depth (Max) 0.60" (15.24mm)
  • Face Width (Max) 2.00" (50.8mm)
  • Range of Tooth Numbers 5 to 200 Inclusive
  • Max pitch Diameter of Typical 35° Spiral Angle Gear Using Maximum Cutter Diameter 350mm Diameter Cutter
    At The Following Ratios:
  • 1:1 10.56" (268.22mm)
  • 2:1 10.83" (275.00mm)
  • 3:1 10.83" (275.00mm)

    Cutter Diameters:
    Face Milling:
  • Conventional Face Sharpened & RSR-C 2.75" - 12"
  • HELIXACT & VERSACUT II 100mm - 320mm
    Face Hobbing:
  • TRI-AC 102mm - 210mm

    Machine Specs:
  • X-Horizontal Travel -4.50 to +7.00" (-114mm to +178mm)
  • Y-Vertical Travel -7.00" to +7.50" (-178mm to +190mm)
  • Z-Sliding Base Travel -5.20" to +19.70" (-131mm to +500mm)
  • B-Root Angle -3° to 90°
  • Machine center to Work Spindle Face 6.50" (165mm)

    AXES SPEEDS
  • X-Horizontal 0 to 3.15"/Sec (0 to 80mm/Sec)
  • Y-Vertical 0 to 3.15"/Sec (0 to 80mm/Sec)
  • Z-Sliding Base 0 to 3.15"/Sec (0 to 80mm/Sec)
  • A-WorkSpindle 0 to 83 RPM 90 to 33 RPM metric)
  • B-Swinging Base 0 to 30 Deg/Sec
  • C-Cutter 0 to 400 RPM

    Work Spindle Dimensions:
  • Diameter of Taper Hole - Large End 5-3/64"(50 Taper)
  • Taper Per Foot 21/32"
  • Depth of Taper 5.29" (134.37mm)
  • Diameter of Hole Through Spindle 3.35" (85.22mm)

    This is a (1) Owner machine, Surplus to a large Aerospace manufacturer. Currently in Storage.


    For additional, freight & rigging information contact Nick at 860-940-6146 or nick@greasymachines.com

  • Year New: 1992
    Serial #:
    State or Province: TX
    Country: United States
    Machine Condition: Used Good
    Short Description: Gleason Phoenix 250HC, Hypoid Bevel Spiral Gear Cutting machine
    Category: Gear Machinery
    Machine Type: Gear Cutting
    Brand Name: GLEASON
    Voltage: 480
    Machine Hours:
    Tooling Included: No
    Under Power or Operable: No
    Electric Foot Switch: No
    Coolant System: No
    Maint Record: No
    Digital Read Out: No
    Controls: CUPROC SERIES 2000 CNC
    Machine Size (LxWxH): 172"x174"x98"
    Machine Weight: 22000
    Size of Worktable:
    Max Weight of Work Piece:
    Tank Size:
    Tonnage:
    Condition Notes: NOT UNDER POWER, Large Aerospace Surplus
    Back to Gear Machinery
    TERMS:All Machines sold "AS IS, WHERE IS" Rigging and Freight is buyer expense. Payment in full required prior to shipping. Listing and Specification information is subject to inspection/verification of buyer. Surplus Asset Management, LLC. will not be held liable for any inaccurate information.